Abstract:Perovskite oxide molybdenum doped strontium ferrite, Sr2Fe1.5Mo0.5O6-delta (SFM), is a promising alternative hydrogen electrode material for solid oxide cells (SOCs) because of its robust stability, but usually suffers from insufficient electrochemical performance. In this work, the easily reducible and catalytically active nickel ion (Ni2+) has been substituted on the B-sites of perovskite oxide SFM in the oxidizing atmosphere to form Sr2Fe1.5-xNixMo0.5O6-delta (SFMNix, x = 0.1, 0.2, and 0.3), and then partially in-situ exsolved out of the parent matrix lattices as active nano-catalysts in the reducing atmosphere to fabricate Fe-Ni alloy nanoparticles decorated SFMNix (Fe-Ni@SFMNix) materials. It is demonstrated that the electrode electrochemical performance could be effectively enhanced by tuning the Ni doping content in the parent oxide. Sr2Fe1.3Ni0.2Mo0.5O6-delta (SFMNi0.2) electrode with the Ni doping content of 0.2 exhibits the excellent electrochemical performance with a relatively low electrode polarization resistance of 0.82 Omega cm(2) in a symmetrical cell at 800 degrees C in 97%H-2 -3%H2O atmosphere, which is ascribed to the maximum exsolved Fe-Ni alloy nanocatalysts from the parent oxide SFMNi0.2. In addition, the electrode reaction process with a high resolution based on the electrochemical impedance spectra has been systematically analyzed by using the distribution of relaxation times (DRT) technique. It is demonstrated by the DRT analysis results that the low-frequency electrode reaction process associated with the hydrogen adsorption, dissociation and ionization process in the frequency range of 1-10 Hz is identified as the rate-limiting step during the operation, meanwhile, this sub-step could be effectively accelerated by varying the Ni doping content with an optimal Ni doping content of 0.2. These results demonstrate that the variation of doping content in the parent perovskite oxide is an effective strategy to manipulate the electrode electrochemical performance, and exsolved Fe-Ni alloy nanoparticles decorated perovskite oxide SFMNi0.2 is a promising hydrogen electrode candidate for SOCs application. Our findings will guide the development of other ceramic oxides electrodes with effectively enhanced electrochemical performance for energy conversion and storage applications. (C) 2020 Elsevier Ltd. All rights reserved.

Ni-Doped SFM Double-Perovskite Electrocatalyst for High-Performance Symmetrical Direct-Ammonia-Fed Solid Oxide Fuel Cells

Exsolved Nanoparticles Decorated Double Perovskites as High-Performance Anodes for Direct-Ammonia Solid Oxide Fuel Cells

A High-Performance and Durable Direct-Ammonia Symmetrical Solid Oxide Fuel Cell with Nano La0.6Sr0.4Fe0.7Ni0.2Mo0.1O3−δ-Decorated Doped Ceria Electrode

Infiltrated NiCo Alloy Nanoparticle Decorated Perovskite Oxide: A Highly Active, Stable, and Antisintering Anode for Direct-Ammonia Solid Oxide Fuel Cells.

Slightly Ruthenium Doping Enables Better Alloy Nanoparticle Exsolution of Perovskite Anode for High-Performance Direct-Ammonia Solid Oxide Fuel Cells

High-Performance Anode Material Sr2FeMo0.65Ni0.35O6−δ with In Situ Exsolved Nanoparticle Catalyst

Boosting the Performance and Stability of Perovskites by Construction of NiFe Alloy and PrOx Heterogeneously Structured Composites for High‐Performance Solid Oxide Fuel Cell Anode

Activating and stabilizing the surface of anode for high-performing direct-ammonia solid oxide fuel cells

La0.6Sr0.4Fe0.8Ni0.2O3-δ perovskite with in-situ exsolved Ni-Fe nanoparticles as high activity catalyst for symmetric solid oxide electrolysis cells

A robust direct-propane solid oxide fuel cell with hierarchically oriented full ceramic anode consisting with in-situ exsolved metallic nano-catalysts

Nickel-Iron Alloy Nanoparticle-Decorated K2NiF4-Type Oxide as an Efficient and Sulfur-Tolerant Anode for Solid Oxide Fuel Cells

Sr2FeNi0.2Cu0.2Co0.1Mo0.5O6 as potential symmetrical electrode for intermediate-temperature solid-oxide fuel cells

In-situ exsolved NiFe alloy nanoparticles on Pr0.8Sr1.2(NiFe)O4-δ for direct hydrocarbon fuel solid oxide fuel cells

Bifunctional electrocatalysts Pr0.5Sr0.5Cr0.1Fe1-xNixO3-δ (x=0.1,0.2) for HOR and ORR of a symmetric solid oxide fuel cell

In-situ Exsolution of Nanoparticles from Ni Substituted Sr2Fe1.5Mo0.5O6 Perovskite Oxides with Different Ni Doping Contents

Perovskite Chromite With In-Situ Assembled Ni-Co Nano-Alloys: A Potential Bifunctional Electrode Catalyst for Solid Oxide Cells

La0.6Sr0.4Co0.2Fe0.8O3-δ Nanoparticles Modified Ni-based Anode for Direct Methane-Fueled SOFCs

Nano La0.6ca0.4fe0.8ni0.2o3-Delta Decorated Porous Doped Ceria As A Novel Cobalt-Free Electrode For "Symmetrical" Solid Oxide Fuel Cells

Leveraging in-situ formation of Ni–Fe nanoparticles to promote the catalytic performance of Ruddlesden-Popper based electrode for symmetrical solid oxide fuel cells

In Situ Exsolved NiFe/(NiFe)O x Core–Shell-Structured Nanocatalysts on Perovskite Anode with Enhanced Coking Resistance

Exsolution in Ni-doped lanthanum strontium titanate: a perovskite-based material for anode application in ammonia-fed Solid Oxide Fuel Cell