Abstract:Solid oxide fuel cells (SOFCs) are energy conversion devices that can solve the energy crisis and environmental pollution, but the low electrochemical performance at intermediate temperatures is still an urgent problem to be addressed. In this work, we investigate the effect of K and F doping on the performance of conventional cobaltfree cathode SSF. XRD demonstrates that SSF, SSKF, SSFF, and SSKFF each display a cubic perovskite structure. Additionally, HT-XRD reveals that SSF, SSKF, and SSFF exhibit exceptional thermal stability, while SSKFF produces the impurity phase Sr3Fe2O7 during the test. XPS suggests that the improvement in SSF performance, resulting from F and K doping, can be largely attributed to the increase in adsorbed oxygen content, which enhances the ORR catalytic activity. The O-2-TPD outcomes indicate that F and K doping stimulate the formation of oxygen vacancies at higher temperatures, thus promoting ORR catalytic activity. Experimentally, the electrochemical impedance spectra results indicate that both K and F doping led to a reduction in the value of polarization resistance, which decreased by over 20% at 800 degrees C. Regarding the output performance, both K and F doping resulted in a substantial increase in the output power from 670.05 to 825.88 and 796.76 mW center dot cm(-2) respectively, at 800 degrees C. However, co-doping with F and K led to a notable reduction in polarization impedance and output power, possibly due to the formation of heterogeneous phases during testing. The results indicate that enhancing the electrochemical performance of SSF can be achieved through the doping of K cations and F anions, but co-doping leads to a decreased performance.

Influences of equal A-site rare-deficiency or B-site high-valent metal doping on NdBaFe2O employed as the symmetrical electrode for solid oxide fuel cells

Effect of Equivalent Nd-Deficient or Mo-Doping on Ndbafe2o 5+Δ Electrode for Symmetrical Solid Oxide Fuel Cells

Improving stability and electrochemical performance of Ba0.5Sr0.5Co0.2Fe0.8O3-δ electrode for symmetrical solid oxide fuel cells by Mo doping

Improving stability and electrochemical performance of Ba 0.5 Sr 0.5 Co 0.2 Fe 0.8 O 3-5 electrode for symmetrical solid oxide fuel cells by Mo doping

Efficient and stable symmetrical solid oxide fuel cell via A-site non-stoichiometry

Nanoscale architecture of (La0.6Sr1.4)0.95Mn0.9B0.1O4 (B Co, Ni, Cu) Ruddlesden–Popper oxides as efficient and durable catalysts for symmetrical solid oxide fuel cells

High-Performance Sr0.95Fe0.8Mo0.1Ni0.1O3−δ Electrode for Reversible Symmetrical Solid Oxide Cells

Monovalent ion doping to enhance the performance of cobalt-free Sm<sub>0.5</sub>Sr<sub>0.5</sub>FeO<sub>3-</sub> cathode for YSZ fuel cells

Improved Performance of a Symmetrical Solid Oxide Fuel Cell by Swapping the Roles of Doped Ceria and La0.6Sr1.4MnO4+δ in the Electrode

Nickel-doped BaCo0.4Fe0.4Zr0.1Y0.1O3-δ As a New High-Performance Cathode for Both Oxygen-Ion and Proton Conducting Fuel Cells

Effects of high-valence Mo content on microstructure and properties of Ba2Fe2-Mo O6- anode materials for solid oxide fuel cells

In situ exsolved Co–Fe nanoparticles on the Ruddlesden-Popper-type symmetric electrodes for intermediate temperature solid oxide fuel cells

Enhanced ORR Activity of A-site Deficiency Engineered BaCo0·4Fe0·4Zr0·1Y0·1O3-δ Cathode in Practical YSZ Fuel Cells

Efficient symmetrical electrodes of PrBaFe2-Co O5+δ (x=0, 0.2,0.4) for solid oxide fuel cells and solid oxide electrolysis cells

Monovalent ion doping to enhance the performance of cobalt-free Sm0.5Sr0.5FeO cathode for YSZ fuel cells

Electrochemical Performance and Anode Reaction Process for Ca Doped Sr2Fe1·5Mo0·5O6-δ As Electrodes for Symmetrical Solid Oxide Fuel Cells

Fabrication and Optimization of La 0.4 Sr 0.6 Co 0.2 Fe 0.7 Nb 0.1 O 3- Δ Electrode for Symmetric Solid Oxide Fuel Cell with Zirconia Based Electrolyte

Ta-doped PrBaFe2O5+δ double perovskite as a high-performance electrode material for symmetrical solid oxide fuel cells

Niobium Doped Lanthanum Strontium Ferrite As A Redox-Stable and Sulfur-Tolerant Anode for Solid Oxide Fuel Cells.

Enhancing the Performance of the p-n Heterostructure Electrolyte for Solid Oxide Fuel Cells via A-Site-Deficiency Engineering

Nb and Pd co-doped La0.57Sr0.38Co0.19Fe0.665Nb0.095Pd0.05O3-δ as a stable, high performance electrode for barrier-layer-free Y2O3-ZrO2 electrolyte of solid oxide fuel cells