Abstract:The impacts of lithium (Li)‐morphology and solid electrolyte interphase (SEI) are decoupled using an interface engineering approach in their kinetically convoluted regime by correlating film resistance with Li‐morphology and surface acidity with SEI composition. The results establish that Li‐morphological control is more advantageous for performance improvement than preformed SEI modulation, due to the inherent challenges in SEI preservation. Lithium (Li)‐morphology and solid electrolyte interphase (SEI) are among the most significant performance regulators in Li‐metal batteries (LMBs). While both Li‐morphology and SEI composition play key roles in the cyclability of LMBs, less is understood about the individual contributions of each factor to overall Li reversibility, particularly at a practical current density (1 mA cm−2) at which the kinetics of both factors are not naturally separated. Herein, an interface engineering approach is introduced to deconvolute the impacts of Li‐morphology and SEI composition on battery performance. By using interfacial nanofilms with differing resistivity (resistive HfO2 versus conductive ZnO), the morphology of Li is varied, and by virtue of similar acidic character of the nanofilms, the formation of anion‐rich SEIs is maintained. It is established that although the surface acidity of the thin films enables preformation of a more anion‐rich SEI, it is not preserved after Li plating. It is further shown that resistance‐controlled, low‐surface‐area Li‐morphology exhibits up to threefold increase in stable cycle life when tested in multiple electrolytes. Overall, these findings explain why Li‐morphological control is more advantageous for performance improvement than preformed SEI modulation due to the inherent challenges in SEI preservation.

Forward and reverse differential-pulse effects applied in the formation of a solid electrolyte interface to enhance the performance of lithium batteries

A Bifunctional Composite Artificial Solid Electrolyte Interphase for High Stable Solid-State Lithium Batteries

Progress In Solid Electrolyte Interface In Lithium Ion Batteries

Deconvoluting Effects of Lithium Morphology and SEI Stability at Moderate Current Density Using Interface Engineering

Uncovering the Effect of Solid Electrolyte Interphase on Ion Desolvation for Rational Interface Design in Li‐Ion Batteries

Constructing multifunctional solid electrolyte interface via in-situ polymerization for dendrite-free and low N/P ratio lithium metal batteries

Boron‐Doped Electrolytes as Interfacial Modifiers for High‐Rate Stable Lithium Metal Batteries

Inorganic Composition Modulation of Solid Electrolyte Interphase for Fast Charging Lithium Metal Batteries

Effect of High-Voltage Additives on Formation of Solid Electrolyte Interphases in Lithium-Ion Batteries

SnF2-Catalyzed Lithiophilic-Lithiophobic Gradient Interface for High-Rate PEO-Based All-Solid-State Batteries

Designing gradient solid electrolyte interphase for stable lithium metal batteries

Constructing an Inorganic-Rich Solid Electrolyte Interphase by Adjusting Electrolyte Additives for Stable Li Metal Anodes

Manipulating the diffusion energy barrier at the lithium metal electrolyte interface for dendrite-free long-life batteries

Stabilization of Lithium Metal Interfaces by Constructing Composite Artificial Solid Electrolyte Interface with Mesoporous TiO2 and Perfluoropolymers

Fine-tuned molecular design toward a stable solid electrolyte interphase on a lithium metal anode from in silico simulation

Fluorinated solid electrolyte interphase enables highly reversible solid-state Li metal battery

Building a Rigid-Soft Coupling Interphase by Reduction-Oxidation Collaborative Approach with Lithium Difluorobis(oxalato) Phosphate Additives

Rectifying interphases for preventing Li dendrite propagation in solid-state electrolytes

Lithium Difluorophosphate As a Widely Applicable Additive to Boost Lithium‐Ion Batteries: a Perspective (adv. Funct. Mater. 8/2023)

Deciphering the effects of electrolyte concentration on the performance of lithium batteries by correlative surface characterization

High Interfacial-Energy Interphase Promoting Safe Lithium Metal Batteries.