Abstract:Abstract Polyethylene oxide (PEO)‐based polymer solid electrolytes (PSE) have been pursued for the next‐generation extremely safe and high‐energy‐density lithium metal batteries due to their exceptional flexibility, manufacturability, and lightweight nature. However, the practical application of PEO‐PSE has been hindered by low ionic conductivity, limited lithium‐ion transfer number ( t Li+ ), and inferior stability with lithium metal. Herein, an ultrathin composite solid‐state electrolyte (CSSE) film with a thickness of 20 μm, incorporating uniformly dispersed two‐dimensional fluorinated boron nitride (F‐BN) nanosheet fillers (F‐BN CSSE) is fabricated via a solution‐casting process. The integration of F‐BN effectively reduces the crystallinity of the PEO polymer matrix, creating additional channels that facilitate lithium‐ion transport. Moreover, the presence of F‐BN promotes an inorganic phase‐dominated electrolyte interface film dominated by LiF, Li 2 O, and Li 3 N on the lithium anode surface, greatly enhancing the stability of the electrode‐electrolyte interface. Consequently, the F‐BN CSSE exhibits a high ionic conductivity of 0.11 mS cm −1 at 30°C, high t Li+ of 0.56, and large electrochemical window of 4.78 V, and demonstrates stable lithium plating/striping behavior with a voltage of 20 mV for 640 h, effectively mitigating the formation of lithium dendrites. When coupled with LiFePO 4 , the as‐assembled LiFePO 4 |F‐BN CSSE|Li solid‐state battery achieves a high capacity of 142 mAh g −1 with an impressive retention rate of 82.4% after 500 cycles at 5 C. Furthermore, even at an ultrahigh rate of 50 C, a capacity of 37 mAh g −1 is achieved. This study provides a novel and reliable strategy for the design of advanced solid‐state electrolytes for high‐rate and long‐life lithium metal batteries.

Boron‐Doped Electrolytes as Interfacial Modifiers for High‐Rate Stable Lithium Metal Batteries

A Bifunctional Composite Artificial Solid Electrolyte Interphase for High Stable Solid-State Lithium Batteries

Fluorinated boron nitride nanosheet enhanced ultrathin and conductive polymer electrolyte for high‐rate solid‐state lithium metal batteries

Stable Anion‐Derived Solid Electrolyte Interphase in Lithium Metal Batteries

High Interfacial-Energy Interphase Promoting Safe Lithium Metal Batteries.

Stabilization of Lithium Metal Interfaces by Constructing Composite Artificial Solid Electrolyte Interface with Mesoporous TiO2 and Perfluoropolymers

In Situ Formed Continuous and Dense Inorganic Borate‐Based SEI for High‐Performance Li‐Metal Batteries

An Inorganic‐Rich Solid Electrolyte Interphase for Advanced Lithium‐Metal Batteries in Carbonate Electrolytes

Cationic Interfacial Layer toward a LiF-Enriched Interphase for Stable Li Metal Batteries

Constructing a magnesium fluoride-rich solid electrolyte interface for high-performance lithium metal anodes

Borate-Based Artificial Solid-Electrolyte Interphase Enabling Stable Lithium Metal Anodes

Simultaneously in-situ fabrication of lithium fluoride and sulfide enriched artificial solid electrolyte interface facilitates high stable lithium metal anode

Fluorinated Interface Layer with Embedded Zinc Nanoparticles for Stable Lithium-Metal Anodes.

An artificial layer enables in situ generation of a homogeneous inorganic/organic composite solid electrolyte interphase for stable lithium metal batteries

Enabling an Inorganic-Rich Interface via Cationic Surfactant for High-Performance Lithium Metal Batteries

Dendrite-free lithium deposition enabled by interfacial regulation via dipole-dipole interaction in anode-free lithium metal batteries

A Dual Functional Artificial SEI Layer Based on a Facile Surface Chemistry for Stable Lithium Metal Anode

Constructing a conductive solid electrolyte interface by adding lithium nitrate into carbonate electrolyte for stable lithium metal anode

Ferroelectric Dipoles Tailoring Solid‐Electrolyte‐Interphase Chemistry to Enable Reversible Lithium Metal Batteries

Polymer–inorganic solid–electrolyte interphase for stable lithium metal batteries under lean electrolyte conditions

Constructing multifunctional solid electrolyte interface via in-situ polymerization for dendrite-free and low N/P ratio lithium metal batteries