Investigation of Li 3 PO 4 Coating and Nb 5+ Doping Effect on the Crystal Structure and Electrochemical Properties of Ni-Rich LiNi 0.85 Co 0.05 Mn 0.10 O 2 Cathode
Feng Chen,Xiao Ma,Xinqi Zhu,Weilong Dai,Congcong Yao,Zhigang Chen,Chengbao Liu
DOI: https://doi.org/10.1149/1945-7111/ac24b8
IF: 3.9
2021-09-01
Journal of The Electrochemical Society
Abstract:To overcome the poor rate capacity and weak cycling performance of Ni-rich cathode materials, the Li3PO4 coating and Nb5+ doping modified LiNi0.85Co0.05Mn0.10O2 series samples were prepared by using the co-precipitation and the sol-gel methods in this work. And the X-ray diffraction, transmission electron microscopy, field emission scanning electron microscopy, energy dispersive spectroscopy, X-ray photoelectron spectroscopy and electrochemical characterization were performed to comprehensively assess the effect of Li3PO4 coating and Nb5+ doping on the morphology, structure and electrochemical properties of LiNi0.85Co0.05Mn0.10O2. The results showed that the Li3PO4 nanoparticles were covered on the surface of cathode with success and the Nb5+ ions were inserted into the crystal structure with uniformity. In comparison with the bare LiNi0.85Co0.05Mn0.10O2, the cathodes after Li3PO4 coating and Nb5+ doping demonstrated the better electrochemical properties in terms of rate capability, cycling performance and thermal stability. The 2 wt% Li3PO4 coated Li(Ni0.85Co0.05Mn0.10)0.99Nb0.01O2 delivered the capacity retention of 92.0% at 25 °C and 90.8% at 45 °C after 300 cycles at 1C rate respectively, much larger than those (83.5% and 80.1%) of the bare one. These results indicated the Li3PO4 coating and Nb5+ doping co-modification could satisfy the performance requirement of maintaining the cycling stability for Ni-rich cathodes.
electrochemistry,materials science, coatings & films