Abstract:Bi0.5Na0.5TiO3 (BNT)-based complexes, one of the most promising piezoelectric materials, have been recently raised as potential ionic conductors. Although the property modification of BNT-based materials was studied intensively, the influence of the preparation process on the structure and conduction mechanism has not received the attention it deserves since its particular sensitivity to the conductive performance. Herein, (Bi0.44Nd0.01Sr0.02Ca0.02)Na0.5TiO2.965 (BNSCNT) ceramics were prepared by tape-casting (TC) and conventional solid-state reaction (SR) method, respectively. Despite the pure perovskite phase with rhombohedral distortion of BNSCNT ceramics prepared by SR, the rutile titanium dioxide phase can be identified for TC. The ac impedance spectra reveal a discernible bulk response with appreciable oxide ion conductive capacity in SR, while the contribution from each physical origin becomes obscure due to the superposition in the Nyquist plots of TC. Combined with the activation energy deduced from the thermally dependent conductivity, which is significantly less than the dielectric BNTs, the dominated ionic conductive nature with non-negligible electron contribution is proposed. The grain boundary and electrodes/interfaces response, and their conduction mechanism in the intermediate frequencies range are disclosed by employing the dc bias field and atmospheres. The field-induced inverse variation is recognized of which the dissociation of defect clusters is responsible for SR, whereas the trapping of conduction electrons on the sample surface and the second phase will play the key role for TC, in determining their impedance. This work raises the great importance of the preparation route on the structure and conduction mechanisms of BNT-based oxide ionic conductive materials.

Nueva Generación De Materiales LTC

Preparation and microwave dielectric properties of multilayer Li 1.075 Nb 0.625 Ti 0.45 O 3 co-fired ceramics with aqueous tape casting

Tape-Casting Li0.34La0.56TiO3 Ceramic Electrolyte Films Permit High Energy Density of Lithium-Metal Batteries

Large Thermal Expansion LTCC System for Cofiring with Integrated Functional Ceramics Layers

High Performance of LTCC with Al2O3/BN Biphasic Ceramics based on BBSZ Glass

LTCC and Bulk Zn4B6O13–Zn2SiO4 Composites for Submillimeter Wave Applications

High Temperature Cofired Ceramic (HTCC), Low Temperature Cofired Ceramic (LTCC), and Ultralow Temperature Cofired Ceramic (ULTCC) Materials

Effect of AlN Addition on Phase Formation in the LTCC with Al2O3/AlN Biphasic Ceramics Based on BBSZ Glass

High-Performance BaTiO3 Film Based on Aqueous Tape Casting for Ultrathin MLCC Applications

Towards rational design of low-temperature co-fired ceramic (LTCC) materials

Tailoring sintering kinetics and dielectric properties of Li2SiO3 ceramics by CaO–B2O3–SiO2 glass dopant for LTCC substrate applications

Synthesis, phase structure and dielectric properties of CoTiTa2O8 by molten salt method for LTCC application

Structure, impedance and conduction mechanisms of tape-casting (Bi0.44Nd0.01Sr0.02Ca0.02)Na0.5TiO2.965 ceramic film

High Performance of Low-Temperature-Cofired Ceramic with Al<sub>2</sub>O<sub>3</sub>/BN Biphasic Ceramics Based on B<sub>2</sub>O<sub>3</sub>-Bi<sub>2</sub>O<sub>3</sub>-SiO<sub>2</sub>-Z nO Glass

Improved flexural strength and dielectric loss in Al2O3-based LTCC with La2O3–CaO–B2O3–SiO2 glass

Microstructural changes and properties of LaxBa(1-x) (Zr0·1Ti0.9)O3 multilayer dielectric ceramics via digital light processing

A New Microwave Ceramic with Low-Permittivity for Ltcc Applications

Tuning high and low thermal expansion coefficients of Li2O–BaO–Al2O3–B2O3–SiO2/quartz LTCC composites by replacing quartz partly with α-Al2O3 or ZrO2

Low loss dielectric materials for LTCC applications: a review

Eco-friendly Tape Casting of Borosilicate Glass/al2o3 Sheets for LTCC Applications

Material Science and Design Strategies of Low-Temperature Co-Fired Ceramic (LTCC) Dielectrics