Abstract:This is the first work to investigate if and/or how changes in the surface structure/properties affect the charge transfer resistance (R CT) of anatase titania with decreasing particle size. It was accomplished by measuring the R CT (Ω) of same weight anatase titania pellets, with particle sizes ranging from 5.31 nm to 142.61 nm. Measurements were made using Electrochemical Impedance Spectroscopy (EIS) at each material's point of zero charge (PZC). Results demonstrated two regions of R CT. Above an average primary particle diameter of 23.54 nm, R CT remained essentially constant. Below, this diameter the R CT value first increased significantly, then decreased almost linearly toward zero. The projected average primary particle diameter where the materials R CT was projected to reach zero resistance is at a diameter of approximately 4.39 nm. A simple test was then developed to determine if at a small enough particle size the material would be affected by an external magnetic field. It was found that a sample with an average particle diameter of 12.689 nm, formed fine needles/threads of particles in deionized water, perpendicular to the settled powder at the base of the potash tube. This led to the development of a simple magnetic separation method to obtain strongly diamagnetic material from a parent population with an average primary particle diameter of 5.31 nm. A pellet consisting of these magnetically separated particles was then pressed at the same weight and pressure as the prior samples. The pellet's R CT was then measured using EIS under the identical conditions as the prior samples. EIS results of the magnetically separated particles in pellet form, under multiple conditions, resulted in Nyquist plots indicating the material exhibited no detectable R CT (i.e., superconductivity). Correlation of the shift in the materials R CT with known structure/property changes for each sample with decreasing particle size allowed the development of a model explaining: (1) the significant increase in diamagnetic strength of the magnetically separated particles and (2) the mechanism controlling the material's R CT.

In Situ Electrical Characterization of Anatase Tio2 Quantum Dots

Atomic Investigation on the Facet‐Dependent Melting of Ceramic Nanostructures Via in Situ Electron Irradiation

Rapid-Heating-Triggered in Situ Solid-State Transformation of Amorphous TiO2 Nanotubes into Well-Defined Anatase Nanocrystals

Enhanced Photoelectrochemical Properties of Nanocrystalline TiO2 Electrode by Surface Sensitization with CuxO Quantum Dots.

Transient Thermal Characterization of Single Anatase TiO 2 nanowire with secondary porous structure

Electrical Conduction of Silicon Oxide Containing Silicon Quantum Dots

Part II: superconductivity observed in magnetically separated nanoscale anatase titania at ambient temperature and pressure in an aqueous environment at its point of zero charge

Nonlinear Effects In Transient Electrothermal Characterization Of Anatase Tio2 Nanowires

The Electrochemical and Structural Changes of Phosphorus-Doped TiO 2 through In Situ Raman and In Situ X-Ray Diffraction Analysis

Electrical Transport Properties of Polycrystalline and Amorphous TiO2 Single Nanotubes

Exploring annealing-triggered phase transformation, photoluminescence quenching, and synergistic effects of Co-doped TiO 2 nanoparticles

In Situ Phase Transition Study of Nano- and Coarse-Grained Tio(2) under High Pressure/Temperature Conditions

Experimental and theoretical study of electronic and hyperfine properties of hydrogenated anatase (TiO$_2$): defects interplay and thermal stability

Study of surface-bulk mass transport and phase transformation in nano TiO2 using hyperfine interaction technique

Study of paramagnetic defect centers in as-grown and annealed TiO2 anatase and rutile nanoparticles by a variable-temperature X-band and high-frequency (236 GHz) EPR

Clocking the Ultrafast Electron Cooling in Anatase Titanium Dioxide Nanoparticles

Thermal conductivity and secondary porosity of single anatase TiO₂ nanowire.

Photoelectrochemical Characteristics of Nano-Titanium Dioxide Thin Films Prepared by RF Magnetron Sputtering

Direct In-Situ Insights into the Asymmetric Surface Reconstruction of Rutile TiO2 (110)

Direct in-situ insights into the asymmetric surface reconstruction of rutile TiO 2 (110)

Thermal expansion coefficient determination of pure, doped, and co-doped anatase nanoparticles heated in sealed quartz capillaries using in-situ high-temperature synchrotron radiation diffraction