Abstract:A mathematical model for free radical polymerizations initiated by a linear bifunctional initiator was described in detail from the fundamental reactions based on the polymerization mechanism and species balance, considering the volume contraction and thermal initiation. The model presented herein utilized diffusion-controlled rate constants based on free volume theory and employed the method of moments to solve the various species concentrations, polymerization rate, molecular weight and polydispersity, considering gel effect, glass effect and cage effect. Conversion, average molecular weight and polydispersity at various initiator [2,5-dimethyl-2,5-di(2-ethylhexoylperoxy)hexane] (DMDEHPH) concentrations and temperatures were calculated with the mathematical model of styrene free radical bulk polymerizations with the linear bifunctional initiator. Model predictions agreed well with experimental data. The various species concentrations were also calculated. The model demonstrated that plot of every species concentration vs. conversion had a maximum value for either various polymer or radical concentrations. Based on model predictions, the biradical concentration was several orders of magnitude smaller than monoradical concentration while polymer concentrations were only different in several times. The plots at various initiator concentrations had no cross-points. And the higher the initiator concentration was, the higher both the radical and polymer concentrations were. The plots had cross-points at various temperatures. And the lower the temperature, the higher the radical and polymer concentrations at gel-effect phase, while the lower the temperature, the smaller the radical and polymer concentrations before and after gel-effect phase.

Optimal Temperature Policies for Batchwise Thermally‐initiated Bulk Polymerization of Styrene

Numerical Analysis of Industrial Styrene Polymerization in Nonideal Tower Reactors

Modeling for the Diffusion Limitation of Free Radical Polymerization

Minimum end time policies for batchwise radical chain polymerization—II A two-stage process for styrene polymerization

Continuous Thermal Bulk Copolymerization of Styrene and Maleic Anhydride

CFD Modeling of Styrene Polymerization in a CSTR

Full‐range Kinetic Study on Bulk Syndiotactic Polymerization of Styrene with Homogeneous Metallocene Catalysis

Minimum end time policies for batchwise radical chain polymerization—III

Minimum end time policies for batchwise radical chain polymerization—III: The initiator addition policies

Toward Polymer Product Design. I. Dynamic Optimization of Average Molecular Weights and Polydispersity Index in Batch Free Radical Polymerization

Optimal Grade Transition of Polymerization Process with Path Constraints

Semicontinuous thermal bulk copolymerization of styrene and maleic anhydride: Experiments and reactor model

Effect of Temperature Switching and Dynamic Phase Equilibrium on Polymer Microstructure in Condensed-Mode Operation

Minimum end time policies for batchwise radical chain polymerization, part V?multicomponent copolymerization with one charge of comonomers

Minimum end time policies for batchwise radical chain polymerization

Thermal polymerization of uninhibited styrene investigated by using microcalorimetry

New Insight in Initiating Mechanism of Anionic Bulk-Polymerization of Styrene at High Temperature (1)

Thermal Research on the Uncontrolled Behavior of Styrene Bulk Polymerization

New Insight in Initiating Mechanism of Anionic Bulk-Polymerization of Styrene at High Temperature (2)

Research on Thermal Runaway Process of Styrene Bulk Polymerization

Experiment and Simulation on Styrene Polymerization with Linear Bifunctional Initiator 2,5-Dimethyl-2,5-di(2-ethylhexoylperoxy)hexane (Dmdehph)