Abstract:A new configuration of aluminum electrodes has been performed in an electrocoagulation reactor (ECR) to remove toxic metals from synthetic wastewater. The ECR contains four concentric-cubic electrodes that were connected to the DC power supply with a bipolar mode. The ability of this reactor to eliminate 200 ppm Pb, 200 ppm Cd and 200 ppm Cu from wastewater was investigated under the effect of pH (4-10), applied current (0.2-2.6 A), and the reaction time of (4-60 min). Two grams of NaCl were added to each experiment to enhance the electrical conductivity and minimize the passivation of cathode surfaces. The experiments, analysis, and optimization were conducted using response surface methodology type Box-Behnken design (RSM-BBD) and the Minitab-statistical software program. The highest elimination of heavy metals was: Pb-99.73%, Cd-98.54%, and Cu-98.92% at pH 10, 1.4 A of the applied current, and 60 min of the reaction time. The total real consumption of anodes under these conditions was 0.55 g, and the energy consumption was 12.71 kWh/m3. All reactions of metal removal that occurred in the present EC reactor obey the kinetic of a first-order reaction. Thermodynamics parameters of present electrocoagulation removal of heavy metals indicate an endothermic, spontaneous nature, and random irregularity at the liquid-solid interaction. The highest values of removal efficiencies and the considerably lowest values of energy and electrode consumption proved that the electrocoagulation technology applies in wastewater treatment containing toxic metals. • The anode electrodes were perforated to decrease the amount of electrode consumption, while the cathode electrodes were not perforated. • The new EC reactor eliminated Pb-99.73%, Cd-98.54%, and Cu-98.92% of 200 mg/l of each metal at pH 10, applied current of 1.4 A, and reaction time of 60 min. Moreover, the consumption of energy and electrodes was significantly low. • The performance indicator (R 2 ) of the studied responses was higher than 0.95.

Electrochemical Recovery of Metals from Cadmium Wastewater

In-situ Upcycling of Cadmium from Wastewater into Core–shell ZnS@Zn0.58Cd0.42S Heterojunction Photocatalyst for Environmental Purification and H2 Evolution

Potential Purification of Cadmium Waste Water by Two Hydrophytes

Electrokinetic removal and recycling of heavy metals from sewage sludge with citric acid complexation

Using Electrode Electrolytes to Enhance Electrokinetic Removal of Heavy Metals from Electroplating Sludge

Progress on Removal of Cadmium by Sorbent

Hydrometallurgical Process Of Waste Cadmiumi-Nickel Cells And Cathode Materials From Battery Plants

Study on the Electrically Enhanced Process for Cadmium Removal by A Pulse in A Sulfuric Acid System

Simultaneous Cu(II)-EDTA decomplexation and Cu(II) recovery using integrated contact-electro-catalysis and capacitive deionization from electroplating wastewater

Electrokinetic Gathering and Removal of Heavy Metals from Sewage Sludge by Ethylenediamine Chelation

Recovery of Cadmium by High-Temperature Vaccum Evaporation from Ni-Cd Batteries

Electrocoagulation removal of Pb, Cd, and Cu ions from wastewater using a new configuration of electrodes

Performance and mechanism of a bioelectrochemical system for reduction of heavy metal cadmium ions

Recovery of nickel from electroless nickel plating wastewater based on the synergy of electrocatalytic oxidation and electrodeposition technology

Enhanced washing of cadmium and lead from polluted river sediment using horizontal electroosmosis

Treatment of Electroplating Wastewater by Electrocoagulation

Recovery of Copper by Electrodeposition Method from Electroplating Wastewater

Metal ion recovery from electrodialysis-concentrated plating wastewater via pilot-scale sequential electrowinning/chemical precipitation

Alternating Current for the Selective Electrodeposition of Cadmium, Iron, and Chromium Method Development for Simulated Industrial Wastewater Sludge

Ultrafast Cu2+ Recovery from Waste Water by Jet Electrodeposition

An Electrochemical Approach to the Recovery of Metals Typical of Battery Waste