Abstract:A new configuration of aluminum electrodes has been performed in an electrocoagulation reactor (ECR) to remove toxic metals from synthetic wastewater. The ECR contains four concentric-cubic electrodes that were connected to the DC power supply with a bipolar mode. The ability of this reactor to eliminate 200 ppm Pb, 200 ppm Cd and 200 ppm Cu from wastewater was investigated under the effect of pH (4-10), applied current (0.2-2.6 A), and the reaction time of (4-60 min). Two grams of NaCl were added to each experiment to enhance the electrical conductivity and minimize the passivation of cathode surfaces. The experiments, analysis, and optimization were conducted using response surface methodology type Box-Behnken design (RSM-BBD) and the Minitab-statistical software program. The highest elimination of heavy metals was: Pb-99.73%, Cd-98.54%, and Cu-98.92% at pH 10, 1.4 A of the applied current, and 60 min of the reaction time. The total real consumption of anodes under these conditions was 0.55 g, and the energy consumption was 12.71 kWh/m3. All reactions of metal removal that occurred in the present EC reactor obey the kinetic of a first-order reaction. Thermodynamics parameters of present electrocoagulation removal of heavy metals indicate an endothermic, spontaneous nature, and random irregularity at the liquid-solid interaction. The highest values of removal efficiencies and the considerably lowest values of energy and electrode consumption proved that the electrocoagulation technology applies in wastewater treatment containing toxic metals. • The anode electrodes were perforated to decrease the amount of electrode consumption, while the cathode electrodes were not perforated. • The new EC reactor eliminated Pb-99.73%, Cd-98.54%, and Cu-98.92% of 200 mg/l of each metal at pH 10, applied current of 1.4 A, and reaction time of 60 min. Moreover, the consumption of energy and electrodes was significantly low. • The performance indicator (R 2 ) of the studied responses was higher than 0.95.

Study on the Electrically Enhanced Process for Cadmium Removal by A Pulse in A Sulfuric Acid System

Editorial: Special Issue on Data Analytics in Process Safety

Electrochemical Oxidation of Chemi-Thermo-mechanical Pulping Wastewater

Process and Anodic Reaction Mechanism of Cadmium Electrically Enhanced Cementation on Zinc Plate under an Ultrasonic Field in Ammoniacal System

In-situ Upcycling of Cadmium from Wastewater into Core–shell ZnS@Zn0.58Cd0.42S Heterojunction Photocatalyst for Environmental Purification and H2 Evolution

Electrochemical Recovery of Metals from Cadmium Wastewater

Optimization analysis and mechanism exploration on the removal of cadmium from contaminated soil by electrokinetic remediation

Insights into the Mechanism of Selective Removal of Heavy Metal Ions by the Pulsed/Direct Current Electrochemical Method

Efficient cadmium removal from industrial wastewater generated from smelter using chemical precipitation and oxidation assistance

Comparison between sinusoidal AC coagulation and conventional DC coagulation in removing Cu2+ from printed circuit board wastewater

Electrocrystallization in pulse electrolysis

Response Surface Method Analysis on Electro-Enhanced Technique for Remediation of Cadmium Contaminated Soil

Mechanism of Combination Membrane and Electro-Winning Process on Treatment and Remediation of Cu2+ Polluted Water Body

Enhanced mechanical stirring by eccentric impeller stirring system in zinc hydrometallurgy process for cadmium removal

Purification of Cu–Zn melt based on the migration behavior of lead and bismuth under pulsed electric current

Enhanced washing of cadmium and lead from polluted river sediment using horizontal electroosmosis

Electrocoagulation removal of Pb, Cd, and Cu ions from wastewater using a new configuration of electrodes

Efficient and eco-friendly cadmium ion recycling: Ultrasonic enhancement of aluminum powder replacement for low-temperature industrial applications

Self-Driven Electrokinetic Remediation of Cd Contamination Soil by Using Double-Chamber Microbial Fuel Cell

Progress on Removal of Cadmium by Sorbent

Electrokinetic remediation of cadmium-contaminated soil using polarity reversal method: Optimization analysis and mechanism exploration