Abstract:Organic light-emitting diode (OLED) has attracted considerable attention due to their unique image quality and market potentials in display field. Efficient blue, green and red emitters with excellent color purity are required for full-color display application, so far great improvements have been achieved for the life time and efficiency of the red and green materials. However, the blue emitting material is still a barrier to commercial applications of OLEDs.Using vacuum thermal evaporation method, blue OLEDs were fabricated by inserting a bathocuproine (BCP) as hole blocking layer (HBL) into conventional double layer (DL) device at the interface of N,N′-bis-(1-naphthyl)-N,N′-biphenyl-1,1′-biphenyl-4,4′-diamine (NPB)/8-hydroxyquinoline aluminum (Alq3). Device structure is indium tin oxide (ITO)/NPB/BCP/Alq/Mg∶Ag, where NPB acts as both hole transporting layer (HTL) and emitting layer (EML), and Alq3 as electron transport layer (ETL). The active emissive area of each device defined by the overlap of ITO and Mg∶Ag was 4 mm×4 mm. Measurements of luminance-voltage (L-V) and current density-voltage (J-V) characteristics were carried out with a Keithley 4200 Semiconductor Characterization System, photoluminescence (PL) and electroluminescence (EL) spectra were measured with an OPT-2000 system. The luminance-voltage and current density-voltage characteristics of devices were investigated, and dif-ferences between their performances were discussed. The results demonstrate that the maximum luminance and luminance efficiency of the BCP device are 2 900 cd/m2 and 0.55 lm/W, respectively. The peak of electroluminescence (EL) spectrum locates at 445 nm and the Commissions Internationale d′Eclairage (CIE) coordinates are (x=0.16, y=0.09), which are independent on the variation of bias voltage. Energy level diagrams were employed to analyze the diversity of device performance with different structures. We find that the high EL performance of the BCP device is attributed to better balance of carriers in the NPB layer by inserting BCP as hole blocking layer (HBL). Optimization of device structure and performance, via adjusting thickness of organic layers, is under investigation.

Emission Spectra Dependence on Voltage and Emissive Layer Layout in Organic Light-Emitting Diodes

The colour-tuning effect of 2,9-dimethyl-4,7-diphenyl-1, 10-phenanthroline in blue–red organic light-emitting devices

Electroluminescence of Organic Light-Emitting Diodes with an Ultra-Thin Layer of Dopant

Investigation of Energy Transfer and Charge Trapping in Dye-Doped Organic Light-Emitting Diodes by Magneto-Electroluminescence Measurement

Energy Distribution in White Organic Light-Emitting Diodes with Three Primary Color Emitting Layers

Effects of Emissive Layer Architecture on Recombination Zone and Förster Resonance Energy Transfer in Organic Light-Emitting Diodes

Emission Characteristics Of Organic Light-Emitting Diodes With A Heterostructure Of Dye Doped Poly(N-Vinyl Carbazole)/Tris(8-Hydroxyquinoline) Aluminum

Electron Blocking and Hole Injection: the Role of N,N′-Bis(naphthalen-1-y)-N,N′-bis(phenyl)benzidine in Organic Light-Emitting Devices

Exciton Dissociation in Organic Light Emitting Diodes at the Donor-Acceptor Interface.

Blue and green organic light-emitting devices with various film thicknesses for color tuning

Efficient Blue Organic Light-Emitting Diodes with Simple Structure Based on N, N '-Bis (1-Naphthyl)-n, N '-Biphenyl-1, 1 '-Biphenyl-4,4 '-Diamine

Luminescent Enhancement of Heterostructure Organic Light-Emitting Devices Based on Aluminum Quinolines

Current Density and Spectrum Analysis of Voltage Withstanding Phosphorescent Organic Light-Emitting Diodes with Thick Organic Layer Structure

Color-tunable Organic Light-Emitting Devices Using a Thin N,N′-bis-(1-naphthyl)-N,N′-diphenyl-1,1′-biphenyl-4,4′-diamine Layer at Heterojunction Interface

Influence of Fluorescent Dye Ultrathin Layer on Luminescence Spectra in Organic Light-Emitting Diodes

Fabrication and Characterization of Blue Organic Light-emitting Diodes Based on N,N′-bis-(1-naphthyl)-N,N′-biphenyl-1,1′-biphenyl-4,4′-diamine

Study on electroluminescence processes in dye-doped organic light-emitting diodes

Synthesis of Thermal Stable Organic Hole Transporting Materials for Use in Electroluminescent Devices

Pure green and narrow bandwidth electroluminescence from organic light-emitting diodes

Study of the Effect of Film Thickness on the Performance of NPB/Alq3 Double Layer Organic Light-Emitting Diodes

Effects of the Morphologies and Structures of Light-emitting Layers on the Performance of Organic Electroluminescent Devices