Abstract:In order to ease the manufacture process of very large permanent magnet (PM) machines, such as direct drive wind power generators, modularity technique is usually adopted. Although conventional fractional slot PM machines with all teeth wound windings show good performance, the coils located at the end part of each segment could be easily damaged because of being exposed to the air. In addition, the local winding faults could easily proliferate to the whole machine due to the physical touch of adjacent coils. Thus, a novel modular fractional slot PM machine with redundant teeth is proposed in this paper, while three phases within each set of winding are still balanced. The construction of the proposed modular PM machine having 42-slots/32-poles (42S/32P) combination is described in detail as an example, which can be treated as the integration of six 6S/5P segments and a redundant 6S/2P machine. The reason for using 6S/2P machine is to get rid of the undesirable unbalanced magnetic force (UMF), which usually exists in rotating asymmetric machines, such as 3S/2P PM machine. Since the end part of each segment in the proposed modular PM machine can be covered by half redundant tooth during the production, more protection can be provided for coils located in these regions. Furthermore, the separation of six segments can improve the fault-tolerant capability of the machine. The electromagnetic performance predicted by finite-element analysis (FEA) also demonstrates that the proposed modular machine will perform better if dual three-phase winding is adopted. Finally, the experiments on the prototyped machine validate the analysis in the paper.

Modular Switched Reluctance Machine with E-core Stators and Segmental Rotors for High Reliability Applications

Novel Modular-Rotor Switched-Flux Permanent Magnet Machines

Performance Analysis of DC-Biased Modular Linear Variable Flux Reluctance Machines

Fault-Tolerant Operation for Single-Phase Open Circuit of Dual-Armature Flux-Switching Permanent Magnet Machine by Connecting Neutral Points

A Doubly-Fed Variable Flux Reluctance Machine with Integrated Stator Field and Armature Winding and Rotor Armature Winding

Novel Modular Fractional Slot Permanent Magnet Machines with Redundant Teeth

A Novel DC-Excited Doubly Salient Machine with Modular II-Shaped Stator Iron Core

Research on a Novel Axial Field Disk Type Switched Reluctance Motor

Development and Investigation of Novel Axial-Field Dual-Rotor Segmented Switched Reluctance Machine

Design of a Low-Ripple Double-Modular-Stator Switched Reluctance Machine for Electric Vehicle Applications

Central-Tapped Node Linked Modular Fault Tolerance Topology for SRM Applications

On The Magnetic Behavior And Steady-State Performance Estimation Of A Bipolar Excited Switched Reluctance Machine

DC-Field Excitation Variable Flux Reluctance Starter Generator With Modular Structure for Fault-Tolerant Capability Improvement

Design and Performance Investigation of Novel Linear Switched Flux PM Machines

Characteristics Evaluation of a Segmental Rotor Type Switched Reluctance Motor with Concentrated Winding for Torque Density and Efficiency Improvement

Modular Seven-Leg Switched Reluctance Motor Drive With Flexible Winding Configuration and Fault-Tolerant Capability

Modular Full-Bridge Converter for Three-Phase Switched Reluctance Motors With Integrated Fault-Tolerance Capability

Simulation Study of a Novel Stator Structure of the Switched Reluctance Motor (SRM) and Its Eletromagnetism Relations

Novel Fault-Tolerant Doubly Fed Flux Reversal Machine with Armature Windings Wound on Both Stator and Rotor Teeth

A Modular Permanent-Magnet Flux-Switching Linear Machine with Fault-Tolerant Capability

Design of Five-Phase Modular Flux-Switching Permanent-Magnet Machines for High Reliability Applications