Abstract:In this article, a novel doubly-fed flux-switching permanent magnet (DF-FSPM) machine is proposed, whose armature windings are wound on both stator poles and rotor teeth. Different from the conventional FSPM machine in which the armature windings are only located in the stator, the rotor slot area is fully utilized in the DF-FSPM machine to improve the electrical loadings and, thus, the torque density. Moreover, it has the potential of fault-tolerant operation, since it comprises two sets of armature windings, which can work individually. The topology and the operating principle of the machine are introduced with reference to a 12-stator-pole/10-rotor-tooth DF-FSPM machine. The electromagnetic performances of the optimized DF-FSPM machine and its FSPM counterpart machine are compared, including the induced voltage, inductances, torque capability, flux weakening capability, efficiency, and power factor. It shows that the DF-FSPM machine can exhibit about 46.5% higher torque density than the FSPM machine, while its torque production per magnet volume is also improved by about 39.6%. In addition, the efficiency and power factor of the DF-FSPM machine are higher than those of the FSPM machine. Finally, experimental validation is conducted on a prototype machine.

A Doubly-Fed Variable Flux Reluctance Machine with Integrated Stator Field and Armature Winding and Rotor Armature Winding

A Novel Doubly-Fed Flux Reversal Linear Machine with Armature Windings Wound on Both Stator and Mover Teeth

Comparative Study of Novel Doubly Fed Doubly Salient PM Machines with Different Stator/Rotor-Pole Number Combinations

Performance Analysis of DC-Biased Modular Linear Variable Flux Reluctance Machines

Winding Configurations and Pole/Tooth Combinations of Doubly-Fed Flux-Switching Permanent Magnet Machines

A Novel DC-Excited Doubly Salient Machine with Modular II-Shaped Stator Iron Core

Novel Fault-Tolerant Doubly Fed Flux Reversal Machine with Armature Windings Wound on Both Stator and Rotor Teeth

Harmonic Analysis of Airgap Magnetic Fields in Doubly-Fed Flux Reversal Permanent Magnet Machines.

A Novel Doubly-Fed Flux-Switching Permanent Magnet Machine with Armature Windings Wound on Both Stator Poles and Rotor Teeth

Design and Optimization of Novel Doubly-Fed Consequent-Pole Flux Reversal Machine

Comparative Analysis of Doubly Fed Flux-Reversal Permanent Magnet Machines with Different PM Arrangements and Consequent-Pole Topologies

Comparative Analysis of Variable Flux Reluctance Machines with Double- and Single-Layer Concentrated Armature Windings

Design of a Doubly-Fed Reluctance Machine for Wind Energy Generation

Comparative Study of Biased Flux PM Machines Having Different Stator Core Segments and Armature Winding Configurations

Design of a Novel Dual Flux Modulation Machine with Consequent-Pole Spoke-Array Permanent Magnets in Both Stator and Rotor

Design and Analysis of a Novel Dual-PM Flux Reversal Machine for Electric Vehicle Propulsion

A Novel Axial Flux Switched Reluctance Machine with Segmented Stator and Rotor

Modeling of a Novel 12-Stator-Pole/10-Rotor-Tooth Doubly-Fed Flux-Switching Permanent Magnet Machine

A Dual Armature Winding Vernier Reluctance Machine with Stator Five-phase DC-biased Current

A Novel Stator-PM Consequent-pole Dual Stator/Rotor Armature Winding Flux Modulated Machine for Multi-Torque Components

DC-Field Excitation Variable Flux Reluctance Starter Generator With Modular Structure for Fault-Tolerant Capability Improvement