Abstract:This work focuses on the epitaxial growth process and kinetics of silicon-based Ir/yttria-stabilized zirconia (YSZ) bilayer films prepared by PLD and magnetron sputtering, including the sequential growth of a YSZ film, an Ir seed layer, and an Ir film on a silicon substrate. The results show that for growing YSZ films by PLD at the target-to-substrate distance of 60 mm, the higher the laser energy density and the oxygen pressure, the lower the laser frequency, the higher the epitaxy quality. In addition, for the preparation of the Ir-seed layer by PLD, background gas decelerates the plasma and suppresses self-sputtering and implantation, which is beneficial to obtaining a high-quality seed layer. In particular, introducing a small amount of oxygen is able to improve the epitaxial quality of the films during the growth of Ir-seed and Ir films, and the mechanism of oxygen is proposed. For the growth of Ir films by magnetron sputtering, the growth rate and the energy of argon ions increased with the increase of RF power, while the epitaxial quality is the opposite. The kinetic theory and simulation results demonstrate that this trend is mainly caused by the increase in the number of particles reaching the substrate without significantly increasing the distribution of high-energy particles. Finally, high-quality Ir (100) films on the YSZ (100) with a fresh surface are prepared. It is shown that increasing the epitaxy quality of the YSZ (100) film and the growth temperature of the Ir film can improve the quality of Ir film. Based on our results, the growth of Ir films on YSZ films with fresh surfaces resulting from in-situ argon plasma cleaning provides a new idea for preparing Ir (100)/YSZ (100) bilayer epitaxial film.

Study on the Preparation of Boron-Rich Film by Magnetron Sputtering in Oxygen Atmosphere

Deposition of Dense SiO2 Thin Films for Electrical Insulation Applications by Microwave ECR Plasma Source Enhanced RF Reactive Magnetron Sputtering

Microstructure and Optical Properties of ZnO Films Deposited by Radio-frequency Reactive Magnetron Sputtering

Preparation of Boron Carbon Nitride Thin Films by Radio Frequency Magnetron Sputtering

Influence of material type and surface roughness of substrate on boronization and its performance

Boron films produced by high energy Pulsed Laser Deposition

The Effect of Oxygen Partial Pressure on RF Sputtered (Ba,Sr)TiO_3 Thin Film and Its Electrical Properties

BN Films Deposited by HFPECVD and the Mechanism of the Process

Relationship between plasma parameters and film microstructure in radio frequency magnetron sputter deposition of barium strontium titanate

Effect of gas flow ratio on the microstructure and mechanical properties of boron phosphide films prepared by reactive magnetron sputtering

Synthesis and Characterization of Boron Thin Films Using Chemical and Physical Vapor Depositions

Boron Doped ZnO Thin Films Fabricated by RF-magnetron Sputtering

Effects of the Oxygen Partial Pressure During Deposition on the Material Characteristics and Magnetic Properties of BaM Thin Films

Enhanced Densification and Mechanical Properties of Β-Boron by In-Situ Formed Boron-Rich Oxide

Influence of Oxygen on the Synthesis of Large Area Hexagonal Boron Nitride on Fe2B Substrate

Preparation of Beta Barium Borate Thin Films by Rf Magnetron Sputtering

Preparation and Characterization of Chromium Oxide Thin Films: the Response of Morphology, Crystal Structure, and Electrical Properties to Oxygen Pressure under Magnetron Sputtering

Preparation of cubic boron nitride films by radio frequency magnetron sputtering and radio frequency ion plating

Room‐Temperature Metal‐Catalyzed Ultrafast Gasification of Ultrathin Boron Flakes

Influence of Boron Doping on Microcrystalline Silicon Growth

The deposition of Ir/YSZ double-layer thin films on silicon by PLD and magnetron sputtering: Growth kinetics and the effects of oxygen