Abstract:RATIONALE:Continuous-flow isotope ratio mass spectrometry (CF-IRMS) is a specialized technique used to quickly analyze very small amounts of sample. We have used CF-IRMS to assess the influences of sample weight and relative carbon content on the accuracy and precision of the δ13 C values of micro amounts of carbonate and non-carbonate in silicate rocks.METHODS:The analytical work was performed on a Gasbench II (GB) sample preparation device and on an Elemental Analyzer (EA), which were both interfaced to CF-IRMS instruments. Potential silicate matrix effects on the carbon isotopic analyses were investigated by measuring mixtures of calibrated carbon reference materials and quartz powder. The calibration lines, established by the measured raw values and the known values of three reference materials mixed with quartz powder, were used to calibrate the δ13 C values of basalt samples from eastern China.RESULTS:The δ13 C values measured by GB-CF-IRMS of one national carbonate reference material, GBW04416, deviate slightly from the known value for approximately 20-70 μg of carbonate contained in 4.5-mL vials; the smaller the sample size, the lower the measured δ13 C values. External precision better than 0.1‰ (1σ, n = 26) is achieved at a signal intensity for mass 44 of between 868 and 1614 mV, corresponding to a sample weight of 30.8-50.2 μg, whereas it is reduced to 0.27‰ (1σ, n = 34) at a signal intensity between 519 and 1614 mV, corresponding to a sample weight of 21.1-50.2 μg. In the EA-CF-IRMS experiments for non-carbonate carbon, at high carbon concentration (greater than 800 ppm) and at optimum sample weights, the accuracy and precision are both better than 0.2‰. For carbon concentrations less than 500 ppm, the measured δ13 C values deviate from the average by up to -1.2‰ and the precision is 0.74‰.CONCLUSIONS:The measured δ13 C values decrease substantially at lower carbon concentration and higher sample weights, and poorer precision is obtained. Suggestions are made to measure repeatedly the same carbon concentration of sample and reference materials in order to obtain not only reproducible, but also accurate carbon isotope ratios.

Rapid Sample Preparation of Dissolved Inorganic Carbon in Natural Waters Using A Headspace-Extraction Approach for Radiocarbon Analysis by Accelerator Mass Spectrometry

Sample Preparation System For Carbonate And Dic In Water At The Gxnu-Ams Laboratory

A New Method to Determine Carbon Isotopic Composition of Dissolved Inorganic Carbon in Seawater and Pore Waters by Co2-Water Equilibrium

A High Precision Method for Calcium Determination in Seawater Using Ion Chromatography

Analytical Method for Concentration and Carbon Isotopic Composition of Dissolved Inorganic Carbon (DIC) by Continuous Flow-Isotope Ratio Mass Spectrometer

Comparability Of Radiocarbon Measurements In Dissolved Inorganic Carbon Of Seawater Produced At Eth-Zurich

An effective method of UV-oxidation of dissolved organic carbon in natural waters for radiocarbon analysis by accelerator mass spectrometry

Simultaneous onboard analysis of seawater dissolved inorganic carbon (DIC) concentration and stable isotope ratio (δ13C‐DIC)

A Field-Based Method for Determination of Dissolved Inorganic Carbon in Water Based on CO2 and Carbonate Equilibria

A Rapid and High‐precision Method for Sulfur Isotope Δ34s Determination with a Multiple‐collector Inductively Coupled Plasma Mass Spectrometer: Matrix Effect Correction and Applications for Water Samples Without Chemical Purification

An Online Method Combining a Gasbench II with Continuous Flow Isotope Ratio Mass Spectrometry to Determine the Content and Isotopic Compositions of Minor Amounts of Carbonate in Silicate Rocks.

Rapid and High-Precision Measurement of Sulfur Isotope and Sulfur Concentration in Sediment Pore Water by Multi-Collector Inductively Coupled Plasma Mass Spectrometry.

Impact of Nitrate Contamination on the Analysis of Carbon and Oxygen Isotopes in Carbonate and a Low-Temperature Phosphoric Acid Digestion Approach for Online Sample Preparation.

New method for simultaneous determination of dissolved organic carbon and its stable carbon isotope ratio in liquid samples: environmental applications

Precise Carbon Isotopic Ratio Analyses of Micro Amounts of Carbonate and Non-Carbonate in Basalt Using Continuous-Flow Isotope Ratio Mass Spectrometry

A Time-Integrated Sampler For Radiocarbon Analysis Of Aquatic Methane

Compound-Specific Radiocarbon Analysis of Low Molecular Weight Dicarboxylic Acids in Ambient Aerosols Using Preparative Gas Chromatography: Method Development

Rapid determination of 90 Sr in seawater using a novel porous crown-based resin and tandem quadrupole ICP-MS/MS in cool plasma and O 2 -He mode

Development of an Autonomous On-Site Dissolved Inorganic Carbon Analyzer using Conductometric Detection

AMS Radiocarbon Measurement with High Accuracy

Routine procedures of organic carbon preparation for 14 C measurements at the Ocean University of China