Abstract:We develop a hybrid optofluidic microcavity by placing a microsphere with a diameter ranging from 1 to 4 μm in liquid-filled plano-plano Fabry–Perot (FP) cavities, which can provide an extremely low effective mode volume down to 0.3–5.1 μm3 while maintaining a high Q-factor up to 1×104–5×104 and a finesse of ∼2000. Compared to the pure plano-plano FP cavities that are known to suffer from the lack of mode confinement, diffraction, and geometrical walk-off losses as well as being highly susceptible to mirror misalignment, our microsphere-integrated FP (MIFP) cavities show strong optical confinement in the lateral direction with a tight mode radius of only 0.4–0.9 μm and high tolerance to mirror misalignment as large as 2°. With the microsphere serving as a waveguide, the MIFP is advantageous over a fiber-sandwiched FP cavity due to the open-cavity design for analytes/liquids to interact strongly with the resonant mode, the ease of assembly, and the possibility to replace the microsphere. In this work, the main characteristics of the MIFP, including Q-factor, finesse, effective mode radius and volume, and their dependence on the surrounding medium’s refractive index, mirror spacing, microsphere position inside the FP cavity, and mirror misalignment, are systematically investigated using a finite-element method. Then, by inserting dye-doped polystyrene microspheres of various sizes into the FP cavity filled with water, we experimentally realize single-mode MIFP optofluidic lasers that have a lasing threshold as low as a few microjoules per square millimeter and a lasing spot radius of only ∼0.5 μm. Our results suggest that the MIFP cavities provide a promising technology platform for novel photonic devices and biological/chemical detection with ultra-small detection volumes.

Sensitive Optofluidic Flow Rate Sensor Based on Laser Heating and Microring Resonator

Optofluidic microring flowmeter based on heat transfer effect

High-Q, Low-Mode-volume Microsphere-Integrated Fabry–Perot Cavity for Optofluidic Lasing Applications

Flow rate sensor based on high-order whispering gallery mode in optofluidic microcavity

Dual-mode optofluidic flow rate sensor

Optical Manipulation of Single Microparticle for Microfluidic Flow Rate Sensing

Bio-inspired flow rate sensor based on optical microfiber embedded soft film

Intensity-Interrogated Sensor Based on Cascaded Fabry–Perot Laser and Microring Resonator

Microfluidic Flow Rate Detection with a Large Dynamic Range by Optical Manipulation

Packaged Microbubble Resonator Optofluidic Flow Rate Sensor Based on Bernoulli Effect

Microfluidic Flowmeter Based on Micro "Hot-Wire" Sandwiched Fabry-Perot Interferometer.

Ultrasensitive Label-Free Coupled Optofluidic Ring Laser Sensor.

Design of Thermal Liquid Flow Microsensor

Coupled Optofluidic Ring Laser for Ultrahigh-Sensitive Sensing.

Fabrication of an integrated high-quality-factor (high-Q) optofluidic sensor by femtosecond laser micromachining

Novel fiber-tip micro flowmeter based on optofluidic microcavity filled with silver nanoparticles solutions

Dual-Mode Fiber Optofluidic Flowmeter with A Large Dynamic Range

Polymer-Coated Hollow Fiber Optofluidic Laser for Refractive Index Sensing

A Novel Microfluidic Flow Rate Detection Method Based on Surface Plasmon Resonance Temperature Imaging

A liquid-metal-based microscale calorimetric in-chip flow sensor for flow rate measuring