Abstract:This work proposes a liquid-metal-based calorimetric micro-flow sensor within a polydimethylsiloxane (PDMS) chip. It can measure the flow rate of fluid in microscale channels, with a range as low as several microliters per minute. This in-chip sensor is proposed to solve the issue of detecting the flow rate in microfluidic systems. To make the sensor compatible with PDMS microfluidic chips, low-melting-point gallium-based alloy and bismuth-based (bi-based) alloy are used to make the micro heater and bi-metal thermocouples, for these alloys can be easily injected into a PDMS chip to form electrodes. To minimize heat resistance (or temperature difference) between fluid and the detecting ends of thermocouples, these ends are directly exposed to liquid in the flow channel with the help of a special reversible bonding technology. Thermocouples are connected in parallel to improve the sensor's response. A novel method to bond and electrically connect the sensor to a PCB (print circuit board) is also elaborated. Since the calorimetric flow sensor is sensitive to heating power, fluid temperature and environment cooling, a dimensionless parameter less independent of these factors is deduced from heat transfer theory, and this idea is used in result processing to offset the bad effect. Experiments with pure water show that this sensor can be used to detect flow rates, with a resolution up to 4 μl/min/mV and a range of 12 μl/min in this case, and that at different heating powers, the thermal potential results vary significantly whereas the dimensionless results nearly keep the same. Present work indicates that this sensor has the potential to be integrated into a PDMS microfluidic system and to provide accurate and stable results if a dimensionless method is used in data processing.

A Novel Microfluidic Flow Rate Detection Method Based on Surface Plasmon Resonance Temperature Imaging

Optical Micro/nanofibre Embedded Soft Film Enables Multifunctional Flow Sensing in Microfluidic Chips

Study on the Flow Field Distribution in Microfluidic Cells for Surface Plasmon Resonance Array Detection

A Gravity-Induced Flow Injection System for Surface Plasmon Resonance Biosensor.

Bio-inspired flow rate sensor based on optical microfiber embedded soft film

Design of Thermal Liquid Flow Microsensor

Theoretical analysis of surface plasmon resonance in capillary sensors

A liquid-metal-based microscale calorimetric in-chip flow sensor for flow rate measuring

Simulation Study Of Nano Aqueous Flow Sensor Based On Amperometric Measurement

Study on design and application of fully automatic miniature surface plasmon resonance concentration analyzer

Novel fiber-tip micro flowmeter based on optofluidic microcavity filled with silver nanoparticles solutions

Digital flow rate sensor based on isovolumetric droplet discretization effect by a three-supersurface structure

Novel High Sensitivity SPR Sensor Based on Surface Plasmon Resonance Technology and IMI Waveguide Structure

Design of a Surface Plasmon Resonance Sensor Based on Grating Connection

Micro Flow Sensor Based on Two Closely Spaced Amperometric Sensors

Microfluidic Flowmeter Based on Micro "Hot-Wire" Sandwiched Fabry-Perot Interferometer.

Temperature-Regulated Surface Plasmon Resonance Imaging System for Bioaffinity Sensing

Non-scan and real-time multichannel angular surface plasmon resonance imaging method.

A Novel Microfluidic Method to Simultaneously Measure Droplet Size and Interfacial Tension Without Visualization

Optofluidic Flow Rate Sensor Based on Packaged Microbubble Resonator

Digital monitoring of the microchannel filling flow dynamics using a non-contactless smartphone-based nano-liter precision flow velocity meter