Abstract:We develop a hybrid optofluidic microcavity by placing a microsphere with a diameter ranging from 1 to 4 μm in liquid-filled plano-plano Fabry–Perot (FP) cavities, which can provide an extremely low effective mode volume down to 0.3–5.1 μm3 while maintaining a high Q-factor up to 1×104–5×104 and a finesse of ∼2000. Compared to the pure plano-plano FP cavities that are known to suffer from the lack of mode confinement, diffraction, and geometrical walk-off losses as well as being highly susceptible to mirror misalignment, our microsphere-integrated FP (MIFP) cavities show strong optical confinement in the lateral direction with a tight mode radius of only 0.4–0.9 μm and high tolerance to mirror misalignment as large as 2°. With the microsphere serving as a waveguide, the MIFP is advantageous over a fiber-sandwiched FP cavity due to the open-cavity design for analytes/liquids to interact strongly with the resonant mode, the ease of assembly, and the possibility to replace the microsphere. In this work, the main characteristics of the MIFP, including Q-factor, finesse, effective mode radius and volume, and their dependence on the surrounding medium’s refractive index, mirror spacing, microsphere position inside the FP cavity, and mirror misalignment, are systematically investigated using a finite-element method. Then, by inserting dye-doped polystyrene microspheres of various sizes into the FP cavity filled with water, we experimentally realize single-mode MIFP optofluidic lasers that have a lasing threshold as low as a few microjoules per square millimeter and a lasing spot radius of only ∼0.5 μm. Our results suggest that the MIFP cavities provide a promising technology platform for novel photonic devices and biological/chemical detection with ultra-small detection volumes.

Flow rate sensor based on high-order whispering gallery mode in optofluidic microcavity

High-Q, Low-Mode-volume Microsphere-Integrated Fabry–Perot Cavity for Optofluidic Lasing Applications

Bio-inspired flow rate sensor based on optical microfiber embedded soft film

Sensitivity-enhanced Optical Sensor Based on Multilayer Coated Fabry–Pérot Interferometer

High-Q WGM microcavity-based optofluidic sensor technologies for biological analysis

Optofluidic Fabry–Pérot Cavity Biosensor with Integrated Flow-Through Micro-/Nanochannels

Highly Sensitive Optical Fiber Micro-Cavity Sensors

Optical Whispering-Gallery-Mode Microbubble Sensors

Caged-Sphere Optofluidic Sensors: Whispering Gallery Resonators in Wicking Microfluidics

Intensity-Interrogated Sensor Based on Cascaded Fabry–Perot Laser and Microring Resonator

Single-molecule optofluidic microsensor with interface whispering gallery modes

Tubular Optical Microcavity for Optofluidic Application

Microfluidic Flowmeter Based on Micro "Hot-Wire" Sandwiched Fabry-Perot Interferometer.

On-chip fluid information detection based on micro-ring optical frequency comb technology and machine learning

Optical Waveguide Double-Ring Sensor Using Intensity Interrogation with a Low-Cost Broadband Source

"Hot-Wire" Microfluidic Flowmeter Based on a Microfiber Coupler.

Mode-splitting Based Optofluidic Sensing at Exceptional Points in Tubular Microcavities

Novel fiber-tip micro flowmeter based on optofluidic microcavity filled with silver nanoparticles solutions

Label free optofluidic DNA hybridization detection based on suspended core fiber whispering gallery mode resonator

A High-Sensitivity Microfluidic Flowmeter Based on Microfiber Coupler

A Miniature Liquid Flowmeter Using All-Fiber Fabry–Perot Cavity for Real-Time Measurement