Abstract:This article is devoted to the synergistic design of the thermal management and signal integrity for 3-D integrated chips. The structure parameters of the micro-fin and interconnected components are optimized to obtain a balanced performance of chip heat dissipation and signal integrity. The 3-D integrated chip flows heat transfer model under the action of electrothermal coupling is developed. A full-wave electromagnetic simulation model of the signal interconnection components is proposed with the same structural parameters. The effects of various structural factors on the heat transfer performance and signal integrity of 3-D integrated chips are investigated. A multiobjective optimization algorithm is carried out to simultaneously reduce the total thermal resistance of the 3-D integrated chip and the signal transmission losses of the critical interconnect components. The results show that the total thermal resistance of the 3-D IC becomes lower with a larger through-silicon via (TSV) diameter, micro-fins height and micro-fin radius, and smaller oxide thickness. When the TSV diameter and oxide thickness increase, the height and radius of the micro-fins are reduced to facilitate the signal transmission of the chip’s interconnected components. The response surface analysis method was used to design the experimental combination and thus obtain the fit function for the performance of the two objectives. Hundred sets of Pareto optimal solutions are obtained by multiobjective optimization. The technique for order preference by similarity to ideal solution (TOPSIS) method is used to select the weights of the two optimization objectives to determine the optimal solution. When thermal resistance and signal transmission are given equal weight in the chip design, thermal resistance is reduced by 13.8%, and signal transmission efficiency is improved by 9.74%. The study has important implications for chip thermal management and signal integrity.

Steady-state electro-thermal analysis and optimization of multilayer boards and substrate-integrated waveguide filters

Multilayered finite-difference method for steady-state thermal analysis of substrate integrated waveguide filter in LTCC

Efficient Electro-Thermal Analysis of SIW Filters Considering Temperature-Dependent Characteristics of Materials

Electromagnetic-Thermal Co-simulation of Microstrip Filter

Parallel Simulation of Electromagnetic and Thermal Characteristic in RF Component

A stabilized parametric level-set XFEM topology optimization method for thermal-fluid problem

Single Field HIE FDTD Solver with Nonuniform Grid Stratagem for More Fine Structure

Thermal-aware electrical analysis of high-speed interconnect

Analysis of Substrate Integrated Waveguide Structures Using Contour Integral Equation

A modeling method for thermal steady-state simulation of the four-layer printed circuit board

Analytical Multistage Thermal Model for FEOL Reliability Considering Self-and Mutual-Heating

Accurate and Fast Thermal Analysis of Multistage Depressed Collectors for Traveling-Wave Tubes Using Finite-Element Method

Thermal Layout Optimization for 3D Stacked Multichip Modules.

Finite-difference frequency-domain algorithm for modeling guided-wave properties of substrate integrated waveguide

Multi-Objective Optimization for Heat Transfer Performance of Micro-Fins and Signal Integrity of Key Interconnect Technologies in 3d Integrated Chips

A Fast Steady-state Thermal Modeling of Power Modules Based on Fourier Analytic Series

Study on Self-Heat Effects in Integrated Circuits with Hot-Spot and Electro-Thermal Coupling Methods

Thermal for 3D stacked modules ?

Efficient Thermal Analysis of Integrated Circuits and Packages with Microchannel Cooling Using Laguerre-Based Layered Finite Element Method

Analysis of hotspots and cooling strategy for multilayer three-dimensional integrated circuits

Characterization and Optimization of the Heat Dissipation Capability of a Chip-On-Board Package Using Finite Element Methods