High-Impact Performance and Thermal Properties of Polyimine Nanocomposites Reinforced by Silicon Carbide Nano-Whiskers
Shiyu Ji,Si Zhang,Zifan Wang,Chaoyue Li,Wenjing Cao,Yongmei Zhu,Chaoshuai He,Yun Chen
DOI: https://doi.org/10.3390/ma16134587
IF: 3.4
2023-06-25
Materials
Abstract:Polymer nanocomposites, which combine the advantages of polymers and fillers, are widely used in the field of automobile and aviation. Polyimine (PI) is an emerging thermoset material with remarkable properties, such as malleability, recyclability, and self-healing. Silicon carbide nano-whiskers (SiCw), as a cheap and high-hardness filler material, are chosen to enhance the properties of polyimine matrix. Silicon carbide nano-whisker-reinforced polyimine (PI-SiCw) nanocomposites were successfully fabricated by heat pressing, which was confirmed by FTIR and XPS tests. According to the results of mechanical tests, the mechanical properties of PI-SiCw nanocomposites were obviously improved. For example, with the addition of 0.5% SiCw, bending strength and bending elongation at break can be simultaneously increased by 33% and 148%, respectively. Surprisingly, the impact strength of PI-SiCw nanocomposites with 2% SiCw was increased by 154% compared to the matrix. SEM and EDS tests showed that the evenly distributed SiCw in the polyimine matrix enhanced the mechanical properties of PI-SiCw nanocomposites according to the mechanism of whiskers pulling out and the bridging principle. According to the TGA test results, the PI composites with SiCw retain a higher weight percentage at 800 °C. The reason was the combined effect of the good thermal stability of SiCw and their strong interactions with the PI matrix. As a result, introducing SiCw into the PI matrix imparts a slight improvement in thermal stability. This article presents an avenue of cost-effective research to enhance the mechanical properties of polyimine composites.
materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering