Abstract:Brillouin optical time-domain analysis (BOTDA) using distributed Brillouin amplification (DBA) only requires a milliwatt-level pump to achieve a sensing range beyond 100 km, which provides a powerful tool for temperature/strain sensing. However, similar to the majority of other long-range BOTDAs, the state-of-the-art reports require > 1000 times average, severely restricting the sensing speed. The blind area over tens of kilometers caused by the nonuniform Brillouin response and parasitic amplitude modulation (AM) are crucial factors affecting the signal-to-noise ratio (SNR). Here, a comprehensive performance optimization and substantial enhancement for BOTDA sensors was presented by the direct demodulation of an injection-locked dual-bandwidth probe wave. Injection locking (IL) can completely eliminate the impact of AM noise; dual-bandwidth probe enables self-adaptive pulse loss compensation, thereby intensifying the SNR flatness along the ultralong fiber, and direct probe demodulation can overcome nonlocal effects and allows ∼19.7 dB enhancement of probe input power. Therefore, using only 100 times average, ∼148.3 km sensing, and ∼5 m spatial resolution were achieved with < ∼0.8 MHz standard deviation of Brillouin frequency shift (BFS) over a broad range (∼131.7 km). The reduction in averages was more than 10 times that of the reported majority of long-range BOTDAs. Such performances were achieved without using time-consuming or post-processing techniques, such as optical pulse coding and image denoising. Because this approach is compatible with optical chirp chain technique without frequency sweeping, fast acquisition (0.3 s) was also realized, which has the potential for fast sensing at 3.3 Hz along a ∼150 km fiber.

154.4Km Botda Based on Hybrid Distributed Raman Amplifications

142.2Km Botda Based on Ultra-Long Fiber Laser with A Ring Cavity

Hybrid Distributed Raman Amplification Combining Random Fiber Laser Based 2Nd-Order and Low-Noise LD Based 1St-Order Pumping

Distributed Raman Amplification Using Ultra-Long Fiber Laser with a Ring Cavity: Characteristics and Sensing Application.

175-Km Repeaterless BOTDA with Hybrid High-Order Random Fiber Laser Amplification

Ultra-Long-Distance Hybrid BOTDA/Ф-OTDR

94 km Brillouin distributed optical fiber sensors based on ultra-long fiber ring laser pumping]

Towards fast sensing along ultralong BOTDA: flatness enhancement by utilizing injection-locked dual-bandwidth probe wave

Time-division Multiplexing-Based BOTDA over 100km Sensing Length

175km repeaterless BOTDA with hybrid 2nd- and 3rd-order Raman random fiber laser amplification

Towards Fully Distributed Amplification And High-Performance Long-Range Distributed Sensing Based On Random Fiber Laser

175km Phase-Sensitive Otdr With Hybrid Distributed Amplification

157km BOTDA with pulse coding and image processing

Ultra-Long-Distance Hybrid Botda/Phi-Otdr

Long-range BOTDA Sensor over 50 Km Distance Employing Pre-Pumped Simplex Coding

100 Km Brillouin Optical Time Domain Analyzer Based on Radom Distributed Feedback Fiber Laser Pumping

Optimization of long-range BOTDA sensors with high resolution using first-order bi-directional Raman amplification

Enhanced Sensing Performance in Long Distance Brillouin Optical Time-Domain Analyzer Based on Raman Amplification: Theoretical and Experimental Investigation

Extending the Sensing Distance of a Single-end Random-access BOTDA for Dynamic Sensing

Bi-Directional Brillouin Optical Time Domain Analyzer System for Long Range Distributed Sensing

Influence of Optical Simple Pulse Coding on the Brillouin Optical Time Domain Analyzer Based on Bi-Directional Raman Amplification