Abstract:Unbalance compensation forces the unbalance rotor to rotate around the geometric axis, then suppresses the unbalance vibration of the rotor to the greatest extent. Aim to the unbalance compensation of active magnetic bearings (AMBs) systems in the full rotation range including rigid body mode frequencies, the polarity switching control (PSC) based on PID control was adopted to effectively suppress the rotor vibration. In the PSC, it was necessary to switch the polarity factor of the notching filter before and after the rigid mode frequencies of the rotor system. However, improper polarity switching frequency could increase the rotor vibration, even destabilize the rotor system. Therefore, in this article, the equivalent stiffness and damping defined by PID control was used to obtain the natural frequency of the AMBs rigid rotor system, and the selection method of polarity switching frequency and PID controller parameters was studied to ensure that the rotor system has a better unbalance compensation effect in the full speed range including the rigid body mode frequency. Besides, in order to further study whether the PSC is dependent on the controller types or not, H-infinity controller based on the PSC was also designed to compare the conclusion drawn from PID controller based on the PSC. PID controller and H-infinity controller are the representatives of fixed parameter controllers and unfixed parameter controllers, respectively. Finally, experiment results verified the correctness of the theoretical analysis.

On The Influence Of Controller Parameters On The Performance Of Rotating System With Magnetic Bearings

Research on tuning method of PID controller parameter for hybrid magnetic bearing

H-infinity Robust Control of the Suspension System for a Bearingless Motor of Permanent Magnet Type

The Effect of Controllers on the Dynamic Behaviour of a Rotor Supported on Active Magnetic Bearings

The Influence of PID Controller Parameters on Polarity Switching Control for Unbalance Compensation of Active Magnetic Bearings Rotor Systems

Vibration of Flexible Rotor Systems with Two-Degree-Of-Freedom Pid Controller of Active Magnetic Bearings

Vibration Control for Active Magnetic Bearing High-Speed Flywheel Rotor System with Modal Separation and Velocity Estimation Strategy

Robust Proportional-Differential Control Via Eigenstructure Assignment for Active Magnetic Bearings-Rigid Rotor Systems

Rotor Vibration Control for Magnetic Suspended High-Speed Flywheel Energy Storage System with Inverse System Method and Extended 2-DOF PID Controller

Multi-Objective Optimal Design of Μ–controller for Active Magnetic Bearing in High-Speed Motor

Stability of Active Magnetic Bearing Flexible Rotor System under Base Swing Condition

Controller Design for a Flexible Rotor Supported by Active Magnetic Bearing Passing the Critical Rotational Speed

Influence of Control Parameters on Dynamic Characteristics of Active Magnetic Bearing System

Robust Proportional Integral Differential Controller Based on H∞ Theory Design for Active Magnetic Bearing

Dynamic Analysis and PD Control in a 12-Pole Active Magnetic Bearing System

NONSYNCHRONOUS VIBRATION OF THE ACTIVE MAGNETIC BEARINGS-ROTOR SYSTEM IN THE HIGH TEMPERATURE GAS-COOLED REACTOR

PID Parameters Optimization on Magnetic Suspension Pump Based on the BP Neural Network Model

The Design of the Robust Controller for Active Magnetic Bearings on Active Disturbance Rejection Technology

Study on Active Magnetic Bearing Controller for HTR-10 Helium Turbine Rotor

Nonlinear Low Bias Current Control for Magnetic Bearing System Using Active Disturbance Rejection Technology

Modeling and Dynamic Behaviors of a Rotor Suspended in Electromagnetic Bearings