Abstract:Unbalance compensation forces the unbalance rotor to rotate around the geometric axis, then suppresses the unbalance vibration of the rotor to the greatest extent. Aim to the unbalance compensation of active magnetic bearings (AMBs) systems in the full rotation range including rigid body mode frequencies, the polarity switching control (PSC) based on PID control was adopted to effectively suppress the rotor vibration. In the PSC, it was necessary to switch the polarity factor of the notching filter before and after the rigid mode frequencies of the rotor system. However, improper polarity switching frequency could increase the rotor vibration, even destabilize the rotor system. Therefore, in this article, the equivalent stiffness and damping defined by PID control was used to obtain the natural frequency of the AMBs rigid rotor system, and the selection method of polarity switching frequency and PID controller parameters was studied to ensure that the rotor system has a better unbalance compensation effect in the full speed range including the rigid body mode frequency. Besides, in order to further study whether the PSC is dependent on the controller types or not, H-infinity controller based on the PSC was also designed to compare the conclusion drawn from PID controller based on the PSC. PID controller and H-infinity controller are the representatives of fixed parameter controllers and unfixed parameter controllers, respectively. Finally, experiment results verified the correctness of the theoretical analysis.

Research on tuning method of PID controller parameter for hybrid magnetic bearing

H-infinity Robust Control of the Suspension System for a Bearingless Motor of Permanent Magnet Type

Research on PID Tuning Method of Magnetically Suspended Rotor System Based on IMC

Fuzzy PID Controller Design for a Permanent Magnet Linear Synchronous Motor Feeding System

The Influence of PID Controller Parameters on Polarity Switching Control for Unbalance Compensation of Active Magnetic Bearings Rotor Systems

Vibration of Flexible Rotor Systems with Two-Degree-Of-Freedom Pid Controller of Active Magnetic Bearings

The sliding variable structure control of mixed magnetic bearing system

Multi-Objective Optimal Design of Μ–controller for Active Magnetic Bearing in High-Speed Motor

Rotor Vibration Control for Magnetic Suspended High-Speed Flywheel Energy Storage System with Inverse System Method and Extended 2-DOF PID Controller

PID Parameters Optimization on Magnetic Suspension Pump Based on the BP Neural Network Model

On The Influence Of Controller Parameters On The Performance Of Rotating System With Magnetic Bearings

Vibration Control for Active Magnetic Bearing High-Speed Flywheel Rotor System with Modal Separation and Velocity Estimation Strategy

Robust Proportional-Differential Control Via Eigenstructure Assignment for Active Magnetic Bearings-Rigid Rotor Systems

H∞ control strategy of permanent magnet linear synchronous motor for feeding system

Design of Magnetic Bearing Control System Based on Active Disturbance Rejection Theory

Stability of Active Magnetic Bearing Flexible Rotor System under Base Swing Condition

Implicit Generalized Predictive Control of an Active Magnetic Bearing System

The Effect of Controllers on the Dynamic Behaviour of a Rotor Supported on Active Magnetic Bearings

H∞ controller for an active magnetic ball levitation system

Active Control of Active Magnetic Bearings for Maglev Flywheel Rotor System Based on Sliding Mode Control

Dynamic Analysis and PD Control in a 12-Pole Active Magnetic Bearing System