Design and Simulation of an N×N Echelle Grating Wavelength Router

Ge Mu,Lin Wu,Yingchen Wu,Jian-Jun He

DOI: https://doi.org/10.1364/acpc.2013.af4b.2

2013-01-01

Abstract:we report the simulation results of a 4×4 wavelength router based on echelle grating with a cyclic spectral response. The device has a small size of 1.3mm × 1.2mm for a channel spacing of 400GHz at 1550nm wavelength band.

What problem does this paper attempt to address?

Facet-Rotated Echelle Grating for Cyclic Wavelength Router with Uniform Loss and Flat Passband

Ge Mu,Pingli Huang,Lin Wu,Jian-Jun He

DOI: https://doi.org/10.1364/ol.40.003978

IF: 3.6

2015-01-01

Optics Letters

Abstract:A novel method for designing a cyclic echelle grating wavelength router with uniform loss and flat passband is proposed and experimentally demonstrated. A 4×4 cyclic wavelength router with a channel spacing of 400 GHz at 1550 nm wavelength band is designed and fabricated in InP. Measurement results show that the loss of 16 input-output combinations varies from 9 to 19.3 dB in a conventional design, with a nonuniformity of 10.3 dB, while the 1-dB spectral bandwidth is only 0.3 nm. By rotating angles of grating facets according to an appropriately designed distribution function, the loss nonuniformity is reduced to 1.5 dB, and a flat-top spectral response with 1 dB bandwidth of 1.0 nm is achieved simultaneously.
Nyquist Pulse Shaping Using Arrayed Waveguide Grating Routers

Yiwei Xie,Leimeng Zhuang,Chen Zhu,Arthur James Lowery

DOI: https://doi.org/10.1364/oe.24.022357

IF: 3.8

2016-01-01

Optics Express

Abstract:We propose and demonstrate by simulations a novel Nyquist-WDM (N-WDM) superchannel transmitter based on an arrayed waveguide grating router (AWGR). This approach can generate Nyquist pulses at multiple wavelengths using a single AWGR. Results for a 3-channel 960-Gbit/s QPSK superchannel system show that a 10% guard band reduces the inter-channel interference (ICI) sufficiently. The design introduces less than 0.16-dB penalty when the waveguide loss is 2 dB/cm and 0.73-dB penalty when the standard deviation of phase error is 10°. Such Nyquist pulse shapers can be realised on a chip scale using photonic integrated circuits technology, and could be compactly integrated with other functional components to create single-chip N-WDM superchannel transmitters.
Etched Diffraction Grating Wavelength Router with Uniform-Loss and Flat-Passband

Mu Ge,He Jianjun

DOI: https://doi.org/10.3788/aos201636.0606001

2016-01-01

Abstract:An etched diffraction grating wavelength router (EDGR) with arc-shaped grating teeth is proposed,and the loss uniformity and spectral passband of the device can be improved simultaneously with proper design for the shape of the grating teeth.A 4 × 4 EDGR with 400 GHz channel spacing,centered at 1550 nm and based on InP platform is designed.Simulation results show that the loss difference of all channels is reduced from 8.1 dB to 0.8 dB.The shape of the spectral response is flat-top and the 1 dB bandwidth is increased from 0.3 nm to 1.6 nm.By adjusting the design parameters,the loss uniformity,bandwidth and entire loss of the device can be balanced.Experimental results show that the loss difference of all channels is 3.1 dB and 1 dB bandwidth is 1.1 nm.The crosstalk of the device is better than-12 dB.The validity of this method is verified.This method does not need to increase the chip size or add extra elements,which can be applied to etched diffraction gratings in any material platform.
A 8×8 Arrayed Waveguide Grating Router Based on SOI Platform

Yue Wu,Ti-ng Ting Lang,Jinyan Song,Jian-Jun He

DOI: https://doi.org/10.1109/icocn.2017.8121403

2017-01-01

Abstract:We design and experimentally fabricate a 8×8 arrayed waveguide grating router(AWGR) with a channel spacing of400 GHz based on silicon-on-insulator (SOI) platform. The arrayed waveguide region of this device is horseshoe-shaped to realize a small footprint of 730 μm × 580 μm. Experimental results show good cyclic performance. The crosstalk and insertion loss are about -21 dB and 2.7 dB, respectively. This compact device can be used in optical interconnect systems.
High Performance Demonstration of a 16 × 16 Silica-based Cyclic Arrayed-Waveguide Grating Router

Zhuping Fan,Jiasheng Zhao,Jian-Jun He

DOI: https://doi.org/10.1109/icocn53177.2021.9563766

2021-01-01

Abstract:An integrated 16 × 16 cyclic-arrayed waveguide grating router (AWGR) targeting C-band DWDM routing applications with a channel spacing of 100 GHz is designed and experimentally demonstrated. Measurement results show that the maximum channel deviation is around ±7% of its channel spacing with the 3-dB bandwidth wider than 0.4 nm for all port combinations, and the minimum insertion loss and the worst crosstalk are about 1.64 dB and 30 dB, respectively.
Compact 4×4 1250GHz silicon arrayed waveguide grating router for optical interconnects

guanting chen,jun zou,tingting lang,jianjun he

DOI: https://doi.org/10.1117/12.2078047

2015-01-01

Abstract:A compact silicon arrayed waveguide grating router (AWGR) for optical interconnects is experimentally demonstrated. The design, fabrication and characterization of this 4x4 AWGR with a 1250 GHz channel spacing and a 5 THz free spectral range are discussed. The loss of the AWGR varies from 2.5 dB to 5.5 dB and the crosstalk is better than -18 dB. The functionality of the AWG as a router and its good rotation property are also presented. This device has a compact footprint of 0.46x0.26mm(2).
Design and Fabrication of An 8×500GHz InP-Based EchelleGrating Wavelength Multiplexer

Ge Mu,Lin Wu,Jian-Jun He

DOI: https://doi.org/10.1364/acpc.2014.ath1a.1

2014-01-01

Abstract:We present an 8×500GHz echelle grating multiplexer on InGaAsP/InP platform in 1550nm wavelength band. The device insertion loss of the device is 8.2dB and the adjacent channel crosstalk ranges from 20dB to 25dB.
Horseshoe-Shaped 16×16 Arrayed Waveguide Grating Router Based on SOI Platform

Yue Wu,Tingting Lang,Jian-Jun He

DOI: https://doi.org/10.1364/acpc.2017.s4j.3

2017-01-01

Abstract:We design and experimentally demonstrate a horseshoe-shaped 16 × 16 arrayed waveguide grating router with a channel spacing of 200 GHz based on SOI platform. The minimum insertion loss and the crosstalk are -3.5 dB and −16 dB, respectively.
8×8 Cyclic Arrayed Waveguide Grating Router Based on InP Platform in O-Band

Zhuping Fan,Jia Guo,Qi Chen,Jinsheng Ni,Jian-Jun He

2019-01-01

Abstract:An integrated InGaAlAs/InP-based 8×8 cyclic arrayed waveguide grating router with a channel spacing of 2.2 nm in telecom O-band is demonstrated. The device can be applied to large-scale monolithic integrated circuits for optical interconnects.
Monolithically Integrated 8 × 8 Transmitter-Router Based on Tunable V-Cavity Laser Array and Cyclic Arrayed Waveguide Grating Router

Zhuping Fan,Jia Guo,Shuojian Zhang,Junqiang Zhu,Jianjun Meng,Qiaoli Li,Yayun Li,Jiasheng Zhao,Jian-Jun He

DOI: https://doi.org/10.1109/jphot.2022.3191946

IF: 2.4

2022-01-01

IEEE Photonics Journal

Abstract:A monolithic 8 × 8 transmitter-router chip fabricated on InGaAlAs-InP multi-quantum well wafer for distributed wavelength routing network in the O-band with a channel spacing of 400 GHz is experimentally demonstrated. A tunable V-cavity laser (VCL) array, a cyclic-arrayed waveguide grating router (AWGR) and a semiconductor amplifier (SOA) array are integrated using the quantum-well intermixing (QWI) technique for its fabrication simplicity and cost effectiveness. A 200 GHz-spaced compact-size VCL is demonstrated with a 27 nm tuning range and a side-mode suppression ratio (SMSR) around 40 dB using a single-electrode controlled tuning. The chip output power is 24.6 mW. Measurement results of the transmitter-router chip show that all 64 input-output combinations have cyclic response spectra. After passing through the SOA with 80 mA bias current, an output power of about 9.6 mW and optical signal-to-noise ratio (OSNR) up to 39 dB have been measured. The demonstrated transmitter-router chip is fabricated on the same quantum well structure without requiring multiple epitaxial growth and complex grating fabrication. The characteristics of multi-wavelength and multi-port transmissions enable the distributed optical routing networks with flexible bandwidth allocation, which can find wide application in datacenters and high-performance computers.
Wavelength-selective 4 × 4 Nonblocking Silicon Optical Router for Networks-on-chip.

Ting Hu,Huiye Qiu,Ping Yu,Chen Qiu,Wanjun Wang,Xiaoqing Jiang,Mei Yang,Jianyi Yang

DOI: https://doi.org/10.1364/ol.36.004710

2011-01-01

Abstract:We design and fabricate a wavelength-selective nonblocking 4 × 4 silicon optical router based on microring resonator for use in future integrated photonic interconnection networks. We successfully demonstrate 12 possible I/O routing paths and present 13 nonblocking operating states, including four broadcasting states, with worst-case extinction ratio and cross talk of 21.05 and -21.56 dB, respectively. Thermal tuning is employed to compensate the resonance shift of microring resonators caused by fabrication errors and adjust the resonance to match the International Telecommunication Unit grid with the channel spacing of 100 GHz.
Realization of an 8x8 AWG router using silicon oxynitride waveguides

Shuxin Wang,Hui Zhao,Tingting Lang,Jian-Jun He

DOI: https://doi.org/10.1117/12.2505539

2018-01-01

Abstract:We experimentally demonstrate a 8x8, 200 GHz cyclic AWG router using silicon oxynitride waveguides. The relative refractive index difference between the core and cladding layers is 9.75%. The output spectral response when light of TM polarization is input from the central input channel shows the central channel loss, non-uniformity and crosstalk are -1.51 dB, 2.23 dB, and -19 dB, respectively. And when light is input from the edge input channel, the central channel loss, non-uniformity and crosstalk are -3.68 dB, 2.38 dB, and -19 dB, respectively. Crosstalks vary from -19 dB to -21 dB for all channels. The device is polarization sensitive and a polarization dependent wavelength shift occurs in the spectral response of each output channel. The central wavelengths from central input channel to central output channel for the TE and TM polarization are 1553.8 nm and 1550.2 nm.
SOI-based Arrayed Waveguide Grating Router with grating couplers fabricated in a single shallow etching step

Chen Yang,Jun Zou,Tingting Lang,Jian-Jun He

DOI: https://doi.org/10.1364/acpc.2015.asu2a.22

2015-01-01

Abstract:We experimentally demonstrate a 8×8 arrayed waveguide grating router (AWGR) based on silicon-on-insulator (SOI) platform. The minimum insertion loss and the crosstalk are 1.90 dB and -15 dB, respectively.
A 8x8 Arrayed Waveguide Grating Router Based On Soi Platform

Yue Wu,Ti-ng Ting Lang,Jinyan Song,Jian-Jun

DOI: https://doi.org/10.1109/icocn.2017.8121403

2017-01-01

Abstract:We design and experimentally fabricate a 8x8 arrayed waveguide grating router (AWGR) with a channel spacing of 400 GHz based on silicon-on-insulator (SOI) platform. The arrayed waveguide region of this device is horseshoe-shaped to realize a small footprint of 730 mu m x580 mu m. Experimental results show good cyclic performance. The crosstalk and insertion loss are about -21 dB and 2.7 dB, respectively. This compact device can be used in optical interconnect systems.
Performance improvement for silicon-based arrayed waveguide grating router.

Jun Zou,Zichun Le,Jinhua Hu,Jian-Jun He

DOI: https://doi.org/10.1364/OE.25.009963

IF: 3.8

2017-01-01

Optics Express

Abstract:We analyze the impact of aberration on spectral performance of silicon-based arrayed waveguide grating (AWG) router with the conventional design using a constant pitch along the grating circle for the array waveguides near the free propagation region (FPR), and simulation results show that due to existence of large aberration, side lobes occur in spectral responses of peripheral output channels for the center input light while more serious side lobes appear in most output channels within a free spectral range (FSR) for the edge channel input. Therefore, there is a high crosstalk in conventional N x N silicon AWG, which is very detrimental for router applications. In order to address it, a simple design with a constant projected period on a line tangent to the grating at its pole for the array waveguides near the FPR is proposed, and aberrations of all output wavelengths within a FSR are kept at a rather low level both for the center and edge input. Then we fabricate two kinds of AWG routers with the conventional and proposed design respectively on a SOI wafer, and experimental results show that spectral responses of the AWG router with the proposed design are significantly improved compared to those obtained in the conventional design, especially for the edge channel input. (C) 2017 Optical Society of America
An Eight-Channel 400 GHz-Spacing Etched Diffraction Grating Multi/Demultiplexer on a Nanophotonic Silicon-on-Insulator Platform

shen ao,qiu chen,hu ting,xu chao,jiang xiaoqing,li yubo,yang jianyi

DOI: https://doi.org/10.1088/0256-307X/30/8/084204

2013-01-01

Chinese Physics Letters

Abstract:An eight-channel 400 GHz-spacing planar waveguide multi/demultiplexer employing etched diffraction grating is designed and fabricated on a silicon-on-insulator platform with a 220 nm thick top layer. The design parameters are optimized by scalar diffraction simulation to obtain optimal performance with a small footprint of only 0.75 mm(2). A bi-level adiabatic taper is used to connect the input/output waveguide and the slab waveguide so as to reduce the insertion loss and the broadening of the diffraction angle of the propagating light. The device is fabricated in a two-step process with E-beam lithography and dry etching, and the alignment accuracy is 10 nm or even better. Measurements show that the insertion loss is 7.35 dB and the crosstalk between adjacent channels is about -15 dB. Ways to improve the performance are also investigated in detail.
On a Scalable, Non-Blocking Optical Router for Photonic Networks-on-Chip Designs

Xiao Tan,Mei Yang,Lei Zhang,Yingtao Jiang,Jianyi Yang

DOI: https://doi.org/10.1109/sopo.2011.5780550

2011-01-01

Abstract:Photonic Networks-on-Chip (NoC) is considered as a promising candidate to interconnect a large number of processing cores. The heart of a photonic NoC is the on chip photonic interconnection network which is composed of silicon waveguides and optical routers. In this paper, we propose a scalable and non-blocking passive optical router design using micro-ring resonators (MRRs), namely the generic wavelength-routed optical router (GWOR). We first introduce a 4×4 GWOR router structure and then show how to construct larger size GWORs using 4×4 GWOR as the basic building block The wavelength assignment schemes for any size GWORs are also derived. For N×N GWOR, N-l input wavelengths are needed and iV-2 different types of MRRs are used. The analysis shows that 4×4 GWOR uses the least number of MMRs and has the least power loss compared with existing router designs.
Ultra-Compact Silicon-Arrayed Waveguide Grating Routers For Optical Interconnect Systems

Guangyi Song,Jun Zou,Jianjun He

DOI: https://doi.org/10.3788/COL201715.030603

IF: 2.56

2017-01-01

Chinese Optics Letters

Abstract:We present compact silicon-arrayed waveguide grating routers (AWGRs) with three different channel spacings of 20, 6.4, and 3.2 nm for optical interconnect systems. The AWGR with the 20 nm channel spacing shows a low loss of 2.5 dB and a low crosstalk of - 20 dB and has a footprint of only 0.27 mm x 0.19 mm. The AWGR with the channel spacing of 6.4 nm has loss ranging from 3 to 8 dB, and the crosstalk is - 18 dB. As for the 3.2 nm channel spacing, the loss is about 4 dB, and the crosstalk is - 12 dB.
InP Based Echelle Diffraction Grating Multiplexer with Flat-Passband

Lili Le,Yayan Chu,Zhipeng Hu,Jinyan Song,Jian-Jun He

DOI: https://doi.org/10.1109/icocn.2017.8121401

2017-01-01

Abstract:An echelle diffraction grating (de)multiplexer with arc shaped grating teeth, based on a multi-guide vertical integration platform in InP is presented. The device can be applied to the 100GBASE-LR4 Ethernet systems, the crosstalk is better than -19 dB. By adjusting grating facets, the 3-dB spectral bandwidth is increased to 2.2 nm compared with 1.7 nm in a conventional design with a loss penalty less than 2 dB. And the nonuniformity is reduced form 1.7 dB to 0.68 dB.
Monolithic 6 × 6 Transmitter-Router with Simultaneous Sub-Nanosecond Port and Wavelength Switching

Jia Guo,Zhuping Fan,Siyang Zhou,Biaohan Liu,Jianjun Meng,Junqiang Zhu,Yayun Li,QiaoLi Li,Jiasheng Zhao,Jian-Jun He

DOI: https://doi.org/10.1364/ol.456675

2022-01-01

Abstract:A monolithic 6x6 transmitter-router with both port and wavelength switching at sub-nanosecond speed is proposed and experimentally demonstrated. Based on an intra-cavity cyclic echelle diffraction grating router (EDGR) and semiconductor optical amplifier (SOA) arrays, each selectable output port can realize a selected multi-wavelength laser (MWL) output. The measurement results show that all 36 input-output combinations have a single-mode emission spectrum with a sidemode suppression ratio (SMSR) over 30 dB. Simultaneous switching of six laser wavelengths is achieved together with the switching of the output port by a single electrode selection. The switching time is less than 1 ns. It can offer a cost-effective solution to multi-wavelength multi-port optical transmitter-routers for fast distributed optical switching in datacenters and high-performance computers (HPCs). (C) 2022 Optica Publishing Group

Design and Simulation of an N×N Echelle Grating Wavelength Router

Facet-Rotated Echelle Grating for Cyclic Wavelength Router with Uniform Loss and Flat Passband

Nyquist Pulse Shaping Using Arrayed Waveguide Grating Routers

Etched Diffraction Grating Wavelength Router with Uniform-Loss and Flat-Passband

A 8×8 Arrayed Waveguide Grating Router Based on SOI Platform

High Performance Demonstration of a 16 × 16 Silica-based Cyclic Arrayed-Waveguide Grating Router

Compact 4×4 1250GHz silicon arrayed waveguide grating router for optical interconnects

Design and Fabrication of An 8×500GHz InP-Based EchelleGrating Wavelength Multiplexer

Horseshoe-Shaped 16×16 Arrayed Waveguide Grating Router Based on SOI Platform

8×8 Cyclic Arrayed Waveguide Grating Router Based on InP Platform in O-Band

Monolithically Integrated 8 × 8 Transmitter-Router Based on Tunable V-Cavity Laser Array and Cyclic Arrayed Waveguide Grating Router

Wavelength-selective 4 × 4 Nonblocking Silicon Optical Router for Networks-on-chip.

Realization of an 8x8 AWG router using silicon oxynitride waveguides

SOI-based Arrayed Waveguide Grating Router with grating couplers fabricated in a single shallow etching step

A 8x8 Arrayed Waveguide Grating Router Based On Soi Platform

Performance improvement for silicon-based arrayed waveguide grating router.

An Eight-Channel 400 GHz-Spacing Etched Diffraction Grating Multi/Demultiplexer on a Nanophotonic Silicon-on-Insulator Platform

On a Scalable, Non-Blocking Optical Router for Photonic Networks-on-Chip Designs

Ultra-Compact Silicon-Arrayed Waveguide Grating Routers For Optical Interconnect Systems

InP Based Echelle Diffraction Grating Multiplexer with Flat-Passband

Monolithic 6 × 6 Transmitter-Router with Simultaneous Sub-Nanosecond Port and Wavelength Switching