Abstract:The thermal characteristics of de-energized AC motors are largely different from those of operating AC motors. The conventional thermal protection techniques are not capable of providing reliable thermal protection for AC motors operated with intermittent periodic duty cycles. This paper proposes a non-intrusive stator winding resistance and temperature estimation technique for soft-starter-connected AC motors with intermittent periodic duty cycles. By changing the operation of the solid-state power switches in the soft-starter, a DC signal can be intermittently injected into the AC motor when de-energized, with no output torque induced. The stator winding resistance and temperature can therefore be monitored based on the DC model of ac motors, when the motors are de-energized. Based on the monitoring of the stator winding temperature, the required thermal recovery time can be accurately estimated, which can greatly reduce the required time of each operating cycle and improve the efficiency of the industrial process. The proposed technique is validated through experimental testing on a 7.5-hp induction motor. The error in the stator temperature estimation can be within 5degC. Using the proposed stator temperature estimation technique, for ac motors operated under intermittent periodic duty cycles, the thermal recovery time can be reduced by 45% with the overall efficiency of the motor system increased by 70%, compared to the stator temperature estimation techniques used in conventional thermal relays. The importance of the proposed technique lies in its non-intrusive nature: only voltage and current measurements are needed; the motor's operating condition is not interrupted.

Compensation For Supply And Motor Unbalances And Line Resistance For A Dc Signal Injection-Based Thermal Protection Method

A DC Signal Injection-Based Thermal Protection Scheme for Soft-Starter-Connected Induction Motors

Practical implementation of a remote and sensorless stator resistance-based thermal protection method

An Active Stator Temperature Estimation Technique for Thermal Protection of Inverter-Fed Induction Motors with Considerations of Impaired Cooling Detection

A Remote and Sensorless Stator Winding Resistance Estimation Method for Thermal Protection of Soft-Starter-Connected Induction Machines

A Remote and Sensorless Thermal Protection Scheme for Soft-Starter-Connected Induction Motors

Magnetic Effects of DC Signal Injection on Induction Motors for Thermal Evaluation of Stator Windings.

An analysis of magnetic saturation in induction motors during dc signal injection

Active Stator Winding Thermal Protection for AC Motors

A Non-Intrusive Winding Heating Method for Induction Motor Using Soft-Starter for Preventing Moisture Condensation

Improving Thermal Recovery Time for Soft-Starter-Connected AC Motors with Intermittent Periodic Duty Cycles

Impaired-Cooling-Condition Detection Using DC-Signal Injection for Soft-Starter-Connected Induction Motors

A Nonintrusive Induction Motor Stator Resistance Estimation Method Using A Soft-Starter

A Nonintrusive Thermal Monitoring Method for Induction Motors Fed by Closed-Loop Inverter Drives

Motor Overload Protection Technology Based on Thermal Network

A nonintrusive thermal monitoring method for closed-loop drive-fed induction machines

Electromagnetic and Thermal Coupling Analysis of a Water-Cooled Double-Sided Permanent Magnet Linear Synchronous Motor

Signal Injection Method Without Torque Ripple for Stator Winding Temperature Estimation of Surface-Mounted PMSM Drive Systems

Power Perturbation Based Virtual Signal Injection Control of MTPA for IPMSM Drive System

Online Estimation of Per-Phase Stator Resistance Based on DC-Signal Injection for Condition Monitoring in Multiphase Drives

A NEW METHOD FOR STATOR TEMPERATURE MONITORING FOR INDUCTION MOTOR