Tribology Study of Lanthanum-Treated Graphene Oxide Thin Film on Silicon Substrate

Zuhan Liu,Da Shu,Pengfei Li,Xianhua Cheng

DOI: https://doi.org/10.1039/c4ra00550c

IF: 4.036

2014-01-01

RSC Advances

Abstract:Low friction coefficient and wear rate of components are crucial for nano-electromechanical-systems.

What problem does this paper attempt to address?

Graphene-induced reconstruction of the sliding interface assisting the improved lubricity of various tribo-couples

Xuan Yin,Fan Wu,Xinchun Chen,Jianxun Xu,Pu Wu,Jinjin Li,Chenhui Zhang,Jianbin Luo

DOI: https://doi.org/10.1016/j.matdes.2020.108661

2020-06-01

Abstract:Graphene has emerged as one of the most promising solid lubricants owing to their exceptional lubricity. The atomically thin nature and its ability to conformally adsorb on the sliding surfaces provide unprecedented pathways for modifying the friction and wear behaviors of the mechanical moving parts. Here, the tribological responses of several representative tribo-couples including bare steel, diamond-like carbon and ceramic materials are investigated to explore the potentials of graphene as surface modifier. Specific emphasis is devoted to the graphene-induced reconstruction of the sliding interface and the growth mechanism of nanostructured tribofilms formed on the contact surface using high-resolution microscopic technique. The results reveal the unique properties of graphene regarding the friction reduction and wear protection irrespective of the types of counterpart materials, graphene-processed methods, dry or humid tests environments. Nevertheless, the interfacial features and the bonding characteristics of the tribofilms are diversified in each specific rubbing case, demonstrating the distinguished adaption capacity of graphene to the tribo-testing conditions. The present findings shed light on the lubrication phenomenon of graphene at the microscale and may provide useful design criterion for 2D-based solid lubricants.

materials science, multidisciplinary
Analysis of Friction Interfaces with Sinusoidal Microchannels and the Hybrid Lubrication Mechanisms of a Tribo-Film

Kang Yang,Hongru Ma,Shuaitao Cao,Xiaoxue Li,Aihu Li,Zengzhi Cao

DOI: https://doi.org/10.1016/j.apsusc.2020.146502

IF: 6.7

2020-01-01

Applied Surface Science

Abstract:The tribological behavior of Ti-alloys is crucial for increasing the service life and improving their usage accuracy of aero/avia-components. In this study, the friction interfaces covered with sinusoidal microchannels filled with SnAgCu, graphene, and Al2O3 were successfully prepared using high-temperature infiltration and laser additive manufacturing. The tribological behaviors, which were measured using the MFT-5000 tribometer of a Ti-(SnAgCu-Al2O3-Graphene), were better than those of the Ti-alloy, Ti-SnAgCu, Ti-(SnAgCu-Al2O3), and Ti-(SnAgCu-Graphene). The low-hardness tribo-film acted as a new-style friction interface during wear and yielded good lubrication. Excellent lubrication of a tribo-film was mainly essential for SnAgCu plastic deformation, inter-lamellar separation of multilayer graphene, and rolling-sliding mixture of spherical Al2O3. This was also attributed to the coordinating functions of SnAgCu-Al2O3, SnAgCu-Graphene, and SnAgCu-Al2O3-Graphene.
MXene/graphene oxide nanocomposites for friction and wear reduction of rough steel surfaces

Ali Zayaan Macknojia,Aditya Ayyagari,Elena Shevchenko,Diana Berman

DOI: https://doi.org/10.1038/s41598-023-37844-0

IF: 4.6

2023-07-08

Scientific Reports

Abstract:Abstract Development of solid lubricant materials that render reliable performance in ambient conditions, are amenable to industrial size and design complexities, and work on engineered surfaces is reported. These coatings are composed of Ti 3 C 2 T x -Graphene Oxide blends, spray-coated onto bearing steel surfaces. The tribological assessment was carried out in ambient environmental conditions and high contact pressures in a ball-on-disc experimental set-up. The evaluation yielded that the use of Ti 3 C 2 T x -Graphene-Oxide coatings led to substantial reduction in friction down to 0.065 (at 1 GPa contact pressure and 100 mm/s) in comparison to the uncoated of single-component-coated surfaces, surpassing the state-of-the-art. The coatings also provided excellent protection against wear loss of the substrate and counter-face. The results were explained based on the observations from Raman spectroscopy, scanning electron microscopy, transmission electron microscopy, and nanoindentation measurements. In operando formation of a dense, hard and stiff, dangling-bond-saturated tribolayer was observed to be the reason for the sustained lubricity even at high test loads and sliding speeds. This report presents the holistic exploration and correlation of structure-property-processing pertaining to the advancement of solid lubrication science.

multidisciplinary sciences
Tribological behavior and microstructural evolution of lubricating film of silver matrix self-lubricating nanocomposite

Xiao Kang,Shuang Yu,Hailin Yang,Yang Sun,Lei Zhang

DOI: https://doi.org/10.1007/s40544-020-0379-y

IF: 4.924

2020-11-09

Friction

Abstract:Abstract The aim of this study is to fabricate the nanocomposite with low friction and high wear resistance using binary solid lubricant particles. The microstructure and tribological performance of the nanocomposite are evaluated, and the composition and film thickness of the lubricating film are observed and analyzed by scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). The nanocomposite exhibited improved tribological properties with a friction coefficient as low as 0.12 and a low wear rate of 2.17 × 10 −6 mm 3 /(N·m) in high-purity nitrogen atmosphere. Decreasing sliding speed can increase lubricating film thickness, and the thickest lubricating film is approximately 125 nm. As the film thickness of the lubricating film exceeded 90 nm, the friction coefficient curves became smooth. In compared with WS 2 , MoS 2 can be more effective in forming the transfer layer on the worn surfaces at the initial stage of the tribological process.

engineering, mechanical
Self-organized transfer film-induced ultralow friction of Graphene/MoWS4 heterostructure nanocomposite

Kexin Ren,Guomin Yu,Zhenxi Zhang,Wenchao Wu,Pei Tian,Muhammad Chhattal,Zhenbin Gong,Yan Li,Junyan Zhang

DOI: https://doi.org/10.1016/j.apsusc.2021.151443

IF: 6.7

2022-01-01

Applied Surface Science

Abstract:We report the tribological performance evaluation of Graphene/MoWS4 heterostructure nanocomposite prepared via simple spin-coating to lubricate the silicon-based MEMS devices. The lubrication mechanism of the nanocomposite was studied by a ball-on-disk tribometer, a three-dimensional surface profilometer, and high-resolution characterization techniques. The results show that the coefficient of friction was reduced from 0.4 to an ultralow friction level (μ ∼ 0.02), and the specific wear rate of the silicon substrate was reduced by 3 orders of magnitude due to the lubricating effect and formation of transfer film of the nanocomposite. High-resolution characterization confirmed the formation of beneficial transfer film, indicating that the nanostructured graphene and MoWS4 were completely mixed in the transfer film. The transfer film enables the formation of low-friction contact by transferring the direct interaction of steel/silicon into an easy sliding steel/transfer film/silicon contact. Furthermore, the particular stacking and orientation of the nanosheets revealed the structural mechanism of ultralow friction.

chemistry, physical,physics, applied, condensed matter,materials science, coatings & films
Nanostructured tribolayer-dependent lubricity of graphene and modified graphene nanoflakes on sliding steel surfaces in humid air

Jianxun Xu,Ting Luo,Xinchun Chen,Chenhui Zhang,Jianbin Luo

DOI: https://doi.org/10.1016/j.triboint.2020.106203

IF: 5.62

2020-05-01

Tribology International

Abstract:Graphene and modified graphene can provide exceptional lubrication when used as additives. Here, we applied several types of graphene on steel tribo-couples to perform friction tests. The results indicate that the solution concentration and processing method regarding the graphene-containing alcohol solution can significantly affect the lubrication performance. Graphene nanoflakes aggregated on the sliding interfaces and underwent structural transformation under high contact pressure after the alcohol completely evaporated. The wear track and wear scar were then effectively protected by the in situ as-formed tribolayer. In contrast, a tribolayer could not form when the tribo-couples slid in a solution environment, as the graphene adsorbed on the contact area could be removed away by the alcohol.

engineering, mechanical
An investigation on the tribological behaviors of steel/copper and steel/steel friction pairs via lubrication with a graphene additive

Junyuan Mao,Guangyan Chen,Jun Zhao,Yongyong He,Jianbin Luo

DOI: https://doi.org/10.1007/s40544-019-0327-x

IF: 4.924

2020-01-18

Friction

Abstract:Abstract In this study, the tribological behaviors of graphene as a lubricant additive for steel/copper and steel/steel friction pairs were compared. For the steel/copper friction pair, the graphene sheets remarkably decreased the coefficient of friction and wear scar depth under low loads, but these slightly increased under high loads. The steel/steel friction pair showed excellent tribological properties even under high loads. Severe plastic deformation on the copper surface reduced the stability of the graphene tribofilm because of a rough copper transfer film on the steel during the running-in period. The results provide a better understanding of the mechanism of graphene as a lubricant additive.

engineering, mechanical
Atomistic simulation and experimental verification of tribological behavior of high entropy alloy/graphene composite coatings

Shuo Li,Wen-Ting Ye,Ye-Ran Shi,Qing Zhou,Yong-Nan Chen,Ting Guo,Yu-Xin Liu,Lai-Chang Zhang,Hai-Feng Wang

DOI: https://doi.org/10.1016/j.surfcoat.2023.129683

IF: 4.865

2023-06-03

Surface and Coatings Technology

Abstract:Dissatisfactory yield strength and wear have been critical issues in FCC single phase high entropy alloy (HEA) limiting wide applications as advanced engineering materials, in spite of their attractive mechanical and physical properties. Here we show by introducing graphene layer, the tribological properties of Fe 20 Ni 20 Cr 20 Co 20 Cu 20 /graphene composite coatings can be noticeably enhanced. In this work, molecular dynamics simulations were performed to probe the tribological mechanisms of HEA/graphene composite coatings. It was revealed that the reasonable choice of single-layer graphene geometry and embedding position play an important part in friction reduction and anti-wear of the coatings. The graphene interface not only cause robust dislocation blockage from HEA, but also reduces the accumulation of atoms at surface during sliding. Besides, the influence of temperature on the tribological behavior of the coatings is explored. The tribological performances of the coatings were also investigated by the experimental nanoscratch test, which are consistent with the simulation results. The present work provides a theoretical and technical support for the design of wear-resistant self-lubricating coatings, promoting the engineering applications of HEA coating materials.

physics, applied,materials science, coatings & films
Study on the Lubricating Characteristics of Graphene Lubricants

Yi Dong,Biao Ma,Cenbo Xiong,Yong Liu,Qin Zhao

DOI: https://doi.org/10.3390/lubricants11120506

2023-01-01

Lubricants

Abstract:Graphene is considered a good lubricant additive. The lubricating properties of graphene lubricant at different concentrations and temperatures are studied via a four-ball friction and wear-testing machine. The results show that the coefficient of friction (COF) and wear scar diameter (WSD) of the steel ball with 0.035 wt% graphene lubricant decreased by 40.8% and 50.4%, respectively. Finally, through surface analysis, the following lubrication mechanism is proposed: as the added graphene particles can easily fill and cover the pores of the friction surface, the contact pressure of the rough peak is reduced, resulting in a lower COF and smoother surface. Although the COF increases with temperature, graphene lubricants still exhibit good lubrication effects.
First-Principles Study of the Friction and Wear Resistance of Graphene Sheets

Wei Dong Ling,Pan Wei,Ji Zheng Duan,Jian Min Chen,Wen Shan Duan

DOI: https://doi.org/10.1007/s11249-017-0834-8

2017-01-01

Tribology Letters

Abstract:Recent researches have already shown that graphene can be a very promising candidate for reducing friction and wear by being coated on various moving mechanical assemblies. Although its excellent lubricative properties have been examined in different environments experimentally, the effect of conditions on graphene tribology performance are not well-understood. This research demonstrates the friction and wear mechanisms of graphene at nanoscale by first-principles calculations performed under two different conditions: in vacuum and in hydrogen. Besides, this report has revealed the difference of tribological performance between graphene coating and graphite powder in vacuum. It is shown that the graphene coating has lower adhesion than graphite powder because of less dangling bonds. Furthermore, with the perfect lamellar structure and low surface energy, graphene sheets exhibits promising wear resistance. Additionally, the adhesion and wear resistance of graphene sheets can be improved by hydrogen-induced flexible electrons. The computational simulations show that the higher adhesion originates from hydrogen adsorption. It is really helpful for the ruptured graphene to extend the wear life by hydrogen passivation.
Molecular dynamics study of graphene-coated reinforced tribomechanical properties: Hard versus soft substrates

Jiayuan Zhou,Yan Lu,Chao Wang,Donghui Feng,Hao Zhang,Yangfan Li

DOI: https://doi.org/10.1016/j.commatsci.2023.112209

IF: 3.572

2023-05-01

Computational Materials Science

Abstract:As a two-dimensional material, graphene film is a good solid lubricant candidate for improving the tribomechanical performance of micro-and nano-electromechanical systems. Graphene has a significant impact on protecting the top layer of a substrate from wear and reducing friction. However, the frictional behavior has been found to vary when coating graphene onto different substrates. In the present study, using molecular dynamics (MD) simulations, graphene was deposited as a monolayer coating on the substrate sliding against the diamond tip, which revealed not only significant improvement in tribological behavior by reducing both friction and contact deformation volume, but also notably demonstrated the difference between hard and soft substrate coating with graphene. Under 58.5nN loading, the optimal antifriction effect of graphene coating on Au substrate was 94.2%, with a higher friction indicating a greater indentation depth and greater contact deformation. The contact deformation volume can be used as a standard to measure the surface friction of graphene. Unlike hard Si substrates, monolayer graphene coatings are prone to rupture at 200 nN loads. At low loads, the single graphene coating has the best anti-friction effect on the soft gold substrate, and at higher loads, the graphene on the hard silicon substrate is not prone to rupture, providing continuous and stable lubrication. The study also revealed a tunable toughening mechanism of graphene layers. The mechanism entails a reduction in the volume of substrate contact deformation with the progressive addition of graphene layers. This finding has the potential to enhance the tribological performance of the graphene-coated substrate.

materials science, multidisciplinary
Tribology Behavior of High-Content Graphene/nanograined Cu Bulk Composites from Core/shell Nanoparticles

Guangyuan Lin,Yifei Peng,Zhilei Dong,Ding-Bang Xiong

DOI: https://doi.org/10.1016/j.coco.2021.100777

IF: 8

2021-01-01

Composites Communications

Abstract:Graphene has attracted intensive attention as a new emerging lubricant and additive in composite materials. By consolidating premade Cu@graphene core/shell nanoparticle powder into bulk composites using hot-pressing, nanograined Cu matrix composites reinforced by high-content graphene with a volume fraction >20% are obtained in this work. Their tribology behaviors are studied via the ball-on-plate tests, and the results show that coefficient of friction is significantly reduced from ~0.6 to ~0.25, and specific wear rate is also decreased. The mechanisms are discussed based on the microstructural evolution of the composites during friction process and the tribology properties of the hot-pressed bulk sample of reduced graphene oxide.
Multilayer Graphene Sheets Assembled By Langmuir-Blodgett For Tribology Application

Huan Liu,Shuming Yang,Jiuhong Wang,Yulong Zhao,Libo Zhao,Zhuangde Jiang

DOI: https://doi.org/10.1109/NANO.2012.6321997

IF: 3.5

2012-01-01

Nanotechnology

Abstract:Few-Iayer graphene exhibits low friction and wear rate with no requirements for additional lubricants. However, the longevity is limited more by wear than friction if load is small for rotating Micro-electromechanical Systems (MEMS). When a MEMS machine is in long time rotating at a high speed, single and bilayer graphene are not wear-resisting enough. Therefore, it requires multilayer graphene. In this paper multilayer graphene sheets are assembled by Langmuir-Blodgett(LB), and the adhesive forces, microtribological behaviors, macrotribological properties are studied. Results show that the multilayer graphene sheets assembled by LB possess good friction reduction.
Tribology Study of Reduced Graphene Oxide Sheets on Silicon Substrate Synthesized via Covalent Assembly

Junfei Ou,Jinqing Wang,Sheng Liu,Bo Mu,Junfang Ren,Honggang Wang,Shengrong Yang

DOI: https://doi.org/10.1021/la102862d

IF: 3.9

2010-09-28

Langmuir

Abstract:Reduced graphene oxide (RGO) sheets were covalently assembled onto silicon wafers via a multistep route based on the chemical adsorption and thermal reduction of graphene oxide (GO). The formation and microstructure of RGO were analyzed by X-ray photoelectron spectroscopy (XPS), attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy, Raman spectroscopy, and water contact angle (WCA) measurements. Characterization by atomic force microscopy (AFM) was performed to evaluate the morphology and microtribological behaviors of the samples. Macrotribological performance was tested on a ball-on-plate tribometer. Results show that the assembled RGO possesses good friction reduction and antiwear ability, properties ascribed to its intrinsic structure, that is, the covalent bonding to the substrate and self-lubricating property of RGO.

chemistry, multidisciplinary, physical,materials science
Author Response for "experimental Investigation on the Tribological Property of Functionalized Graphene Lubricant Against Steel"

Yong Qian,Hongying Gong,Xiaoyun Zhao,Lei Cao,Weizhong Shi,Jianli He

DOI: https://doi.org/10.1108/ilt-08-2019-0344

2020-01-01

Industrial Lubrication and Tribology

Abstract:Purpose The purpose of this study is to corroborate the advanced tribological properties of graphene as a lubricant additive. Design/methodology/approach Different concentrations of functionalized graphene were coated on the substrate surface. Tribological properties of the graphene lubricants were carried out by ball-on-disk tribology tests. Wear mechanism of functionalized graphene was studied by observing wear scars on the substrate surface. Finally, the wear resistance of modified graphene was calculated by calculating and analyzing the applied experimental conditions and the obtained experimental data. Findings The best concentration of graphene lubricant is 0.5 wt.% which shows the best tribological performance. And the coefficient of friction is 0.08. Compared with the dry friction condition, the coefficient of friction and wear rate of best graphene lubricant decreased by 80% and 82%. Originality/value The formula of graphene lubricant is independently developed and works very well. Graphene lubricant can prevent the substrate from oxidation. The thickness of the graphene lubricant is about 4-7µm. The concept of anti-wear strength was introduced in this paper. When 0.5 Vol.% graphene was added, the anti-wear strength was greatly improved from 115.3 kg·mm-2 to 657.6 kg·mm-2. Peer review The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-08-2019-0344
Lubrication Performance of Graphene in the Sliding Electrical Contact Interface

Lv Wang,Qian Tang,Tao Liang,Chenxu Liu,Deen Sun,Shu Wang,Jingchuan Li,Sam Zhang,Yonggang Meng,Yuehua Huang

DOI: https://doi.org/10.1007/s40544-024-0910-7

IF: 4.924

2024-01-01

Friction

Abstract:Electrical contact materials are increasingly widely used, but the existing electric contact lubricants still have lots of room for improvement, such as anti-wear performance and lubrication life. Due to the excellent electrical and lubrication properties, graphene shows great potential in lubricating the sliding electrical contact interface, but there is a lack of relevant research. Some researchers have studied the lubrication performance of graphene between the gold-coated/TiN-coated friction pair at an ultra-low current. However, the lubrication performance of graphene on more widely used electrical contact materials such as copper and its alloys under larger and more commonly used current or voltage conditions has not been reported. In this paper, we study the lubrication performance of graphene in the copper and its alloys sliding electrical contact interface under usual parameters, which is explored through four aspects: different substrates—copper and brass, different test methods—constant voltage and constant current, different normal loads and durability test. The experiments demonstrate that graphene can significantly reduce the friction and wear on brass and copper under the above test methods and parameters, with low contact resistance at the same time. Our work is expected to provide a new lubricant for electrical contact materials and contribute to enriching the tribological theory of graphene.
Experimental Study of Tribological Performance on Silicon Micro-textured Surface

Dong Yunkai,Zhang Xiangjun,Liu Ying,Wen Shizhu

DOI: https://doi.org/10.3969/j.issn.0254-0150.2008.01.001

2008-01-01

Abstract:The tribological property of moveable components has been one of the key factors affecting the performance and reliability of MEMS.To study the tribological performance of micro-components,a new flat-flat micro-tribotester was developed to simulate the real situations in MEMS.With the friction study of silicon micro-textured surfaces,it is shown that the friction coefficient is greatly affected by sliding velocity,and there is an optimization parameter of surface topography that can decrease friction coefficient and the effects of sliding speed.
Robust Microscale Structural Superlubricity Between Graphite and Nanostructured Surface

Xuanyu Huang,Tengfei Li,Jin Wang,Kai Xia,Zipei Tan,Deli Peng,Xiaojian Xiang,Bin Liu,Ming Ma,Quanshui Zheng

DOI: https://doi.org/10.1038/s41467-023-38680-6

IF: 16.6

2023-01-01

Nature Communications

Abstract:Structural superlubricity is a state of nearly zero friction and no wear between two contacted solid surfaces. However, such state has a certain probability of failure due to the edge defects of graphite flake. Here, we achieve robust structural superlubricity state between microscale graphite flakes and nanostructured silicon surfaces under ambient condition. We find that the friction is always less than 1 μN, the differential friction coefficient is on the order of 10-4, without observable wear. This is attributed to the edge warping of graphite flake on the nanostructured surface under concentrated force, which eliminate the edge interaction between the graphite flake and the substrate. This study not only challenges the traditional understanding in tribology and structural superlubricity that rougher surfaces lead to higher friction and lead to wear, thereby reducing roughness requirements, but also demonstrates that a graphite flake with a single crystal surface that does not come into edge contact with the substrate can consistently achieve robust structural superlubricity state with any non-van der Waals material in atmospheric conditions. Additionally, the study provides a general surface modification method that enables the widespread application of structural superlubricity technology in atmospheric environments.
Tribological Studies On A Novel Oil-Soluble Nano-Graphene Oxide As Anti-Wear Additives In Rapeseed Oil

Pengpeng Ning,Lei Wang,Wenya Wang,Zhenwei Wang,Shuzhen Li,Zixin Ye

2015-01-01

Abstract:Nanoparticles have good tribological properties in the field of tribology. Nanographene has good mechanical strength, it is the highest intensity substance and can be served as novel anti-wear additives. Graphene poor dispersibility in water and common organic solvents. Therefore, by introducing alkyl group into a kind of additive named graphene oxide, a novel anti-wear additives, alkylation graphene oxide, were synthesized. Its tribological properties were evaluated in rapeseed oil. During friction, the mixed film containing organic C and iron oxide generated were formed on the worn surface, which is important to anti-wear.
Graphene Oxide Nanosheets as Effective Friction Modifier for Oil Lubricant: Materials, Methods, and Tribological Results

Adolfo Senatore,Vincenzo D'Agostino,Vincenzo Petrone,Paolo Ciambelli,Maria Sarno

DOI: https://doi.org/10.5402/2013/425809

2013-02-25

ISRN Tribology

Abstract:The tribological behaviour of graphene oxide nanosheets in mineral oil was investigated under a wide spectrum of conditions, from boundary and mixed lubrication to elastohydrodynamic regimes. A ball-on-disc setup tribometer has been used to verify the friction reduction due to nanosheets prepared by a modified Hummers method and dispersed in mineral oil. Their good friction and antiwear properties may possibly be attributed to their small structure and extremely thin laminated structure, which offer lower shear stress and prevent interaction between metal interfaces. Furthermore, the results clearly prove that graphene platelets in oil easily form protective film to prevent the direct contact between steel surfaces and, thereby, improve the frictional behaviour of the base oil. This evidence is also related to the frictional coefficient trend in boundary regime.

Tribology Study of Lanthanum-Treated Graphene Oxide Thin Film on Silicon Substrate

Graphene-induced reconstruction of the sliding interface assisting the improved lubricity of various tribo-couples

Analysis of Friction Interfaces with Sinusoidal Microchannels and the Hybrid Lubrication Mechanisms of a Tribo-Film

MXene/graphene oxide nanocomposites for friction and wear reduction of rough steel surfaces

Tribological behavior and microstructural evolution of lubricating film of silver matrix self-lubricating nanocomposite

Self-organized transfer film-induced ultralow friction of Graphene/MoWS4 heterostructure nanocomposite

Nanostructured tribolayer-dependent lubricity of graphene and modified graphene nanoflakes on sliding steel surfaces in humid air

An investigation on the tribological behaviors of steel/copper and steel/steel friction pairs via lubrication with a graphene additive

Atomistic simulation and experimental verification of tribological behavior of high entropy alloy/graphene composite coatings

Study on the Lubricating Characteristics of Graphene Lubricants

First-Principles Study of the Friction and Wear Resistance of Graphene Sheets

Molecular dynamics study of graphene-coated reinforced tribomechanical properties: Hard versus soft substrates

Tribology Behavior of High-Content Graphene/nanograined Cu Bulk Composites from Core/shell Nanoparticles

Multilayer Graphene Sheets Assembled By Langmuir-Blodgett For Tribology Application

Tribology Study of Reduced Graphene Oxide Sheets on Silicon Substrate Synthesized via Covalent Assembly

Author Response for "experimental Investigation on the Tribological Property of Functionalized Graphene Lubricant Against Steel"

Lubrication Performance of Graphene in the Sliding Electrical Contact Interface

Experimental Study of Tribological Performance on Silicon Micro-textured Surface

Robust Microscale Structural Superlubricity Between Graphite and Nanostructured Surface

Tribological Studies On A Novel Oil-Soluble Nano-Graphene Oxide As Anti-Wear Additives In Rapeseed Oil

Graphene Oxide Nanosheets as Effective Friction Modifier for Oil Lubricant: Materials, Methods, and Tribological Results