Abstract:An active optical system with three segmented mirrors was proposed to verify the co-focus and co-phase progress. In this system, a kind of large-stroke and high-precision parallel positioning platform was specially developed to help support the mirrors and reduce the error between them, which can move in three degrees of freedom out of plane. The positioning platform was composed of three flexible legs and three capacitive displacement sensors. For the flexible leg, a kind of forward-type amplification mechanism was specially designed to amplify the displacement of the piezoelectric actuator. The output stroke of the flexible leg was no less than 220 μm and the step resolution was up to 10 nm. Further, a linear model was established to identify the amplification ratio between the actuator and the flexible leg, which can increase the precision of the positioning platform. Moreover, three capacitive displacement sensors with a resolution of 2.5 nm were symmetrically installed in the platform to accurately measure the position and attitude of the platform. To improve the stability and precision of the platform, particle swarm optimization algorithm was applied to identify the control matrix, which can help the platform achieve ultra-high precision positioning. The results showed that the theoretical matrix parameters had a maximum deviation of 5.67% from the experimental ones. Finally, abundant experiments verified the excellent and stable performance of the platform. The results proved that while bearing the heavy mirror, which is no more than 5 kg, the platform can realize a 220 μm translation stroke and 2.0 mrad deflection stroke, with a high step resolution of 20 nm and 0.19 μrad. These indicators can perfectly cater to the requirements of the proposed segmented mirror system's co-focus and co-phase adjustment progress.

Design of A Precision Two-Dimensional Tip-Tilting Stage System for Autocollimator-Based Long Trace Profiler Angular Calibration

A Systemic Model for Simultaneously Measuring Three dimensional Rotation Angles of the Linear Guide Track [J]

High-Accuracy Method for Measuring Two-Dimensional Angles of A Linear Guideway

A High-Precision Five-Degree-Of-Freedom Measurement System Based on Laser Collimator and Interferometry Techniques

Comprehensive Design and Calibration of an Even Aspheric Quarter-Wave Plate for Polarization Point Diffraction Interferometry.

Ultra-sensitive angle sensor based on laser autocollimation for measurement of stage tilt motions

Calibrate the Non-Orthogonal Error of AFM with Two-Dimensional Self-Traceable Grating.

Full Area Covered 3D Profile Measurement of Special-Shaped Optics Based on a New Prototype Non-Contact Profiler.

A novel orientation and position measuring system for large & medium scale precision assembly

Development of a high-precision long trace profiler utilizing shear measurements

Multi-pitch Self-Calibration Measurement Using a Nano-Accuracy Surface Profiler for X-ray Mirror Metrology.

Developing of In-Suit Long Trance Profiler for Testing Slope Error of Aspherical Optical Elements

Aspherical Interferometric Probe with Wave-Plate-array Detection: System Design and Nonlinearity Analysis.

A simultaneous calibration technique of the extrinsic and turntable for structured-light-sensor-integrated CNC system

Design of Fine Pointing Tip/tilt Mirror of ATP System for Free Space Optical Communication

Design and Parameter Identification for a Positioning Platform with a Large Stroke and High Precision for Segmented Mirrors

Multi-pitch Nano-Accuracy Surface Profiler for Strongly Curved X-ray Mirror Metrology

Design of high resolution tip/tilt mirror for multi-mirror ground-based telescope

An on-axis self-calibration approach for precision rotary metrology stages based on an angular artifact plate

A Three-Dimensional Small Angle Measurement System Based on Autocollimation Method.

Micro Angle Measurement For A Scanning Stage