Abstract:Coarser grains lead to fewer voids on the fracture surfaces of miniaturized workpiece via affecting the void nu-cleation, while finer grains result in a higher flow strength by influencing void growth. Furthermore, finer grains make the occurrence of normal tensile fracture difficult, but they accelerate the happening of shear-dominated fracture. These insights help the development of ductile fracture criterion by considering the fracture micro-mechanism in micro-scaled plastic deformation. Shear factor and size effect are thus introduced into the newly modified GTN-Thomason criterion to predict the ductile fracture in micro-scaled plastic deformation of cop-per sheets with different microstructural grain sizes and deformation stress states. The developed criterion is implemented in simulation of deformation process and well validated to be efficient by corroboration of the ex-perimental results and the simulated load-stroke responses and deformation profiles of five sheets with different grain sizes and stress states. According to the accurate simulation results, the influences of stress triaxiality, the normalized third invariant and grain size on void evolution are further analysed. The results show that the in-crease of the normalized invariant prevents void shear and leads to a better ductility, while the increase of stress triaxiality facilitates the growth of voids to result in a worse ductility. When the deformation with a relatively high normalized invariant has an ignored void shear, the increase of grain size accelerates the onset of void coalescence and the rate of void growth, leading to a rapid failure. However, when the deformation with a rela-tively low normalized invariant has an unneglected void shear, finer grains increases the rates of void nucleation, growth and shear, causing a smaller fracture strain. These findings and the modified GTN ductile fracture criterion enhance the understanding and prediction of ductile fracture in micro-scaled plastic deformation, respectively, and further facilitate the development of microparts using by deformation-based micro-manufacturing process.

THE CRITERION OF CRITICAL VOID GROWTH RATE AND ITS APPLICATIONS

Improvement Of Cyclic Void Growth Model For Ultra-Low Cycle Fatigue Prediction Of Steel Bridge Piers

A New Ductile Fracture Criterion for Various Deformation Conditions Based on Microvoid Model

A Ductile Fracture Criterion Based on Three-Dimensional Void Model

Towards Fully Automatic Modelling of the Fracture Process in Quasi-Brittle and Ductile Materials: a Unified Crack Growth Criterion

A Micromechanical-Based Failure Criterion for Rocks after High-Temperature Treatment

Z-C Criterion of Void Closure for Large-ingot Hot Forging and Its Application

Growth of random polyhedral void in structural steel based on micromechanical RVE simulations

Experimental Evaluation of Microvoid Characteristics and Relationship with Stress and Strain for Ductile Fracture

Experimental determination of the void volume fraction for S235JR steel at failure in the range of high stress triaxialities

Numerical Simulation and Experimental Verification of Ductile Fracture Criteria of Metals

A Modified G Criterion Considering T-stress and Differentiating the Separation and Shear Failure in Crack Propagation

A Rate Dependent Formulation for Void Growth in Single Crystal Materials

In-situ Three-dimensional Investigation on Micro Ductile Fracture Mechanism of Mild Steel

Experimental Quantification of Critical Parameters for Prediction of Surface Crack Formation in Continuous Casting

THE MECHANISM AND ITS EFFECTIVE ENERGY CRITERION OF VOID COALESCENCE UNDER DIFFERENT STRESS TRIAXIALITY

A Ductile Fracture Criterion under Warm-Working Conditions Based on the Multiscale Model Combining Molecular Dynamics with Finite Element Methods

The Modified GTN-Thomason Criterion for Modelling of Ductile Fracture Considering Shear Factor and Size Effect in Micro-Scaled Plastic Deformation

A novel model to predict microvoid evolution in tensile necking using macroscopic deformation behavior

The mechanistic origins of heterogeneous void growth during ductile failure

A criterion for void closure in large ingots during hot forging