Abstract:The strength of a square plate with a central crack at normal separation was studied within the framework of the Neuber–Novozhilov approach using a modified Leonov–Panasyuk–Dugdale model using an additional parameter, the diameter of the plasticity zone (width of the pre-fracture zone). As a model of a deformable solid body, a model of an ideal elastic-plastic material with a limiting relative elongation was chosen. This class of materials includes, for example, low-alloy steels used in structures operating at temperatures below the cold brittleness threshold. In the presence of a singular feature in the stress field in the vicinity of the crack tip, it is proposed to use a two-parameter discrete integral strength criterion. The deformation fracture criterion is formulated at the tip of a real crack, and the force criterion for normal stresses, taking into account averaging, is formulated at the tip of a model crack. The lengths of real and model cracks differ by the length of the pre-fracture zone. The constitutive equations of the analytical model are analyzed in detail depending on the characteristic linear dimension of the material structure. Simple formulas suitable for verification calculations for the critical breaking load and the length of the pre-fracture zone are obtained. Numerical modeling of the propagation of plasticity zones in square plates under quasi-static loading has been performed. In the numerical model, the updated Lagrangian formulation of the equations of mechanics of a deformable solid body is used, which is most preferable for modeling the deformation of bodies made of an elastic-plastic material at large deformation. The plastic zone in the vicinity of the crack tip is obtained by the finite element method. The results of analytical and numerical prediction of plate fracture under plane deformation are compared. It is shown that the results of numerical experiments are in good agreement with the results of calculations using the analytical model of fracture of materials with a structure under normal separation. Diagrams of quasi-brittle and quasi-ductile fracture of a structured plate are constructed.

Near Crack Line Elastic-Plastic Analysis for an Infinite Plate Loaded by a Pair of Point Shear Forces

Near crack line elastic–plastic analysis for a infinite plate loaded by two pairs of point tensile forces

Finite Element Analysis of Crack Dynamic Response in Gradient Non- Homogeneous Finite Plate

Analysis of a Finite Element Model of 2-D Elastic-Plastic Crack

Stress analysis of an elastic semi-infinite plate containing internal crack

ELASTIC-PLASTIC ANALYSIS OF A DYNAMICALLY LOADED DOUBLE NOTCH THIN PLATE

Elastic-Plastic Finite Element Analysis of the Effect of the Compressive Loading on the Crack Tip Plasticity

Elastic–plastic finite element analysis and experimental study of short and long fatigue crack growth

Three Dimensional FE Analysis of the Plastic Zone Size Near the Crack Tip

Simulation Of Elastoplastic Fracture Of A Center Cracked Plate

Evolution of a crack embedded in an elastic-plastic plate

A numerical method for multiple cracks in an infinite elastic plate

Plastic stress-strain fields and limit loads of a plane strain cracked tensile panel with a mismatched welded joint

Ultimate Fracture Strength Analysis of Thin Rectangular Plate with Inclined Center Crack

Response of Elastic-Plastic Plate Embedded Cracks at Different Orientation under Impact Load

A Boundary Element Analysis for Stress Intensity Factors of Multiple Circular Arc Cracks in a Plane Elasticity Plate

Analysis for A Crack Emanating from A Corner of A Square Hole in an Infinite Plate Using the Hybrid Displacement Discontinuity Method

Analytical Characterizations of Crack Tip Plastic Zone Size for Central-Cracked Unstiffened and Stiffened Plates under Biaxial Loading

Elastic-plastic fracture analysis of finite bodies—I. Description of the stress field

Nonlinear dynamic response of cracked strips

Steady-state Thermo-Elastic Field in an Infinite Medium Weakened by a Penny-Shaped Crack: Complete and Exact Solutions