Abstract:High-precision and power-efficient sensor interfaces have become increasingly ubiquitous as they form an integral part of multiple fast-growing sectors such as instrumentation control, medical devices, and agricultural automation. Much progress has been recently made in direct-digitization sensor readout circuits (DD-RO). By skipping the instrumentation amplifier (IA) and connecting the ADC directly to the sensor, this architecture reduces system-level complexity compared to conventional IA plus ADC solutions. However, several challenges must be considered. First, in the absence of an IA, it requires a high dynamic range (>90dB) ADC to process the cross-scale input signals and disturbances spanning from several μV to hundreds of mV while retaining excellent sensitivity and linearity, which would usually entail excessive power dissipation. Such demanding DR can be relaxed by a spectrum-shaping $\Delta-\Delta\Sigma$ ADC [1] (Fig. 1). However, $\Delta-\Delta\Sigma$ ADCs are better suited to the spectral characteristic of bioelectrical signals and disturbances (electrode offset, power-line interference, and motion artifact), whose amplitudes decrease approximately with frequency. Second, conventional ADCs typically exhibit finite input impedance that hampers their direct interaction to high-impedance sensors due to the deterioration of total common-mode rejection ratio (T-CMRR) and gain accuracy. Prior art DD-ROs rely on a positive feedback loop (PFL) [2] or pre-charging buffers [3] for impedance boosting, but the former requires dedicated manual calibration while the latter suffers from additional noise, power, and area overhead. Alternatively, a $\Delta\Sigma$ ADC employing the $\mathrm{G}_{\mathrm{m}}-\mathrm{C}$ integrator provides high input impedance (Fig. 1 bottom left), and $\mathrm{G}_{\mathrm{m}}$ can be linearized by degeneration [2], [4]–[6] or fully differential transconductors embedded in current feedback [7] [8] (Fig. 1 bottom right). However, $\mathrm{G}_{\mathrm{m}}$ often dissipates more power to accommodate out-of-range input signals while retaining linearity.

A Fully Isolated Delta-Sigma ADC for Shunt Based Current Sensing

A Capacitively Coupled Digital Isolator Using Multiple-Pulse-coding Architecture with CMTI of 200kv/μs and Static Current of 60Μa.

A Capacitively Coupled Digital Isolator Using Multiple-pulse-coding Architecture with CMTI of 200 Kv/μs and Static Current of 60 Μa

A Capacitively Coupled Digital Isolator with CMTI of 162 kV/μs and Data Rate of 230 Mbps

A 10-Bit 250-KS/s 1.24-uW SAR ADC for IoT Sensors with Energy-Efficient Comparator.

A Low-Power Inverter-Based ΣΔ Analog-to-digital Converter for Audio Applications

A 10.7-Μa 103-Db DR Hybrid Delta-Sigma Modulator for Sensing Applications

A Low-power High-resolution Band-pass Sigma-delta ADC for Accelerometer Applications

A Fully Dynamic 4-Channel 13b Simultaneous Sampling Incremental ΔΣ ADC Using Cascoded Floating-Inverter-Amplifier and Code Division Multiplexing Technique

A Differential Compensated Air Coil Current Sensor for Switching Current Measurement of Power Devices.

A 125$μ$W 8kS/s Sub-pA Area-Efficient Current Sensing 45nm CMOS ADC for Biosensing

A High-Sensitivity Large-Dynamic-Range Current-Domain Continuous-Time Zoom ADC for Current-Sensing Front-End

A low power high-side current sense SAR ADC for automotive applications

Analog Isolated Multilevel Quantizer for Voltage Sensing while Maintaining Galvanic Isolation

Direct Current to Digital Converter (DIDC): A Current Sensor

A 103.6Db-Sndr 760Mvpp-Input-range 7.8Gω-Input-impedance Direct-Digitization Sensor Readout with Pseudo-Differential Transconductors and Dummy DAC

A 1-V 23-Μw 88-Db DR Sigma-Delta ADC for High-Accuracy and Low-Power Applications.

A 0.014mm2 10Khz-Bw Zoom-Incremental-Counting ADC Achieving 103db SNDR and 100db Full-Scale CMRR

A 188.6-Μw Continuous-time Incremental Delta-Sigma ADC with Extended Counting Achieving 95.2-Db SNDR and 175.4-Db FoMSNDR

A 95-Db DR Second Order Incremental ΣΔ ADC for Multi-Channel Healthcare Application

Enhanced Limit-of-Detection of Current Sensor Based on Tunneling Magnetoresistive Effect With Multichips Differential Design