Abstract:This paper presents an ultra-low-voltage 10-bit successive approximation-register analog-to-digital converter (SAR ADC) based on the binary search algorithm for biomedical applications. An energy-efficient DAC switching scheme for a fully differential SAR ADC is proposed, which achieves a 99.8% reduction in DAC switching energy compared to conventional SAR ADC. In this design, by using a dummy capacitor split technique, an attempt has been made to reduce the capacitor of the most significant bit, resulting in a 92.87% reduction in the total number of capacitors compared to conventional design. In the proposed structure, the common-mode voltage of the comparator is approximately constant. The maximum voltage variation in the proposed switching scheme is Vref/2. Additionally, power consumption has been reduced by implementing the power gating technique in the control logic part. The proposed converter with a sampling frequency of 1 kS/s and a supply voltage of 0.2 V has been designed and simulated in TSMC 65nm CMOS technology. Both analytical calculations and simulation results confirm the effectiveness of the proposed switching scheme. Ultimately, the proposed scheme achieves a power consumption of 2.08 nW and a Figure of Merit (FoM) of 5.39 fJ/conversion-step. In comparison with the state-of-the-art, the proposed design has demonstrated excellent performance in achieving optimal power.

A low power high-side current sense SAR ADC for automotive applications

A 10-Bit 250-KS/s 1.24-uW SAR ADC for IoT Sensors with Energy-Efficient Comparator.

A Front-End Circuit With 16-Channel 12-Bit 100-Ksps Rc-Hybrid Sar Adc For Industrial Monitoring Application

A 16-Channel 12-Bit Rail-to-rail Successive Approxmation Register ADC for AFEs

A 16-Bit 2.5-Ms/s SAR ADC with On-Chip Foreground Calibration

A Low-Power Inverter-Based ΣΔ Analog-to-digital Converter for Audio Applications

A Design of Low-Power 10-bit 1-MS/s Asynchronous SAR ADC for DSRC Application

A Novel Low-Power 8 Bit SAR ADC for Battery-less TPMS SoC

An Area-Efficient 55 Nm 10-Bit 1-Ms/s Sar Adc for Battery Voltage Measurement

A 1-V 560-Nw SAR ADC with 90-Db SNDR for IoT Sensing Applications

A Low Power 10-Bit 100-Ms/s SAR ADC in 65nm CMOS

A 10-Bit 16-Ms/s Ultra Low Power SAR ADC for IoT Applications

Ultra-low power 10-bit 50–90 MSps SAR ADCs in 65 nm CMOS for multi-channel ASICs

A 12b 200KS/s SAR ADC with novel capacitor switching procedure and digital background calibration

A 24-µW 11-bit 1-MS/s SAR ADC with a bidirectional single-side switching technique

Design of a 0.2V 2.08nW 10-bit 1kS/s High Energy Efficiency SAR ADC with Dummy Capacitor Splitting Technique for Biomedical Applications

Direct Current to Digital Converter (DIDC): A Current Sensor

A 1.5MSPS, 120 dB SFDR, ±10 V input range SAR ADC with sampling nonlinearity compensation and inherent 2-b coarse ADC for MSBs decision

A 0.9V 12-Bit 200-Ks/s 1.07µw SAR ADC with Ladder-Based Reconfigurable Time-Domain Comparator

A Single-Ended 10-Bit 200 Ks/s 607 Μw SAR ADC with an Auto-Zeroing Offset Cancellation Technique

Low-Power SAR ADC Design: Overview and Survey of State-of-the-Art Techniques