Abstract:A high sensitivity liquid refractive index (RI) sensor based on a single mode fiber-multimode fiber-tapered thin-core fiber-single mode fiber (SMTTS) structure is simulated by the beam propagation method (BPM). The modal interference between core and cladding mode happened because of modal mismatch and the transmission spectrum is calculated by BPM. The approximate linear relationship between liquid RI and spectrum dip wavelength shifts is obtained to demodulate RI value. To make a comparison, transmissions of single mode fiber-thin-core fiber-single mode fiber (STS) as well as single mode fiber-multimode fiber-thin-core fiber-single mode fiber (SMTS) are also calculated. It is significantly shown that the interference is improved by the segment of multimode fiber (M_MF). And the tapered thin-core fiber (TCF) has the functions that not only further can enhance the fringe visibility, but also can increase the RI sensitivity, which is higher with the thinner thin-core taper diameter. When the taper diameter is 53.51m, the average RI sensitivity could reach up to -116.7nm/RIU within the RI range of 1.33 to 1.39. This is much higher than the value of SMTS structure. And in the practice application, it could be a slimmer taper in the SMTTS structure to improve the sensitivity just achieving by a simple fabrication process. All process could be finished using fusion splicer, cutter and hydrogen flame.

Tunable Mode Coupler in the Microfluidic Channel for the Fiber Optics Refractive Index Sensor

Refractive Index Sensor Based on a Microhole in Single-Mode Fiber Created by the Use of Femtosecond Laser Micromachining

Fiber optic refractive index sensor using optofluidic anti-resonant reflecting guidance

Vernier-effect-based fiber microcoupler for highly sensitive liquid refractive index sensing

Highly Sensitive Refractive Index Sensor Based on In-Fiber Optofluidic Fabry-Pérot Interferometer

A highly sensitive four-wave mixing-based microstructured fiber refractive index sensor for microfluid sensing applications

Microfluidic Refractive Index Sensor Based on an All-Silica In-Line Fabry-Perot Interferometer Fabricated with Microstructured Fibers.

Novel Intensity-demodulated Fiber-optic Refractive Index Sensor Based on Splicing Point Tapered Fiber

Four-wave Mixing-Based Photonic Crystal Fiber Microfluid Sensor with Embedded U-shape Microslits

Highly Sensitive Refractive Index Optical Fiber Sensors Fabricated by a Femtosecond Laser

High Sensitivity Refractive Index Sensor Based On Tapered Thin-Core Fiber

Optical fiber micro-hole sensor fabricated with femtosecond laser

Simultaneous Measurement of Refractive Index and Temperature with High Sensitivity Based on a Multipath Fiber Mach-Zehnder Interferometer

High-sensitivity refractive index sensor with tunable detection range based on dual-core resonance effect in gold-coated photonic crystal fibers

High Sensitivity Evanescent Field Refractometer Based on Modal Interference in Micro-Capillary Wall

Temperature-insensitive Fiber-Optic Refractive Index Sensor Based on Cascaded In-Line Interferometer and Microwave Photonics Interrogation System

Highly sensitive refractive index sensor with fiber in-line Fabry-Perot interferometers based on vernier effect

A High Sensitivity Refractive Index Sensor Based on Photonic Crystal Fibre Mach–Zehnder Interferometer

Optical Fiber Sensor Based on Capillary Wall for Highly-Sensitive Refractive Index Measurement

High-sensitivity refractive index sensors based on fused tapered photonic crystal fiber

A Sensitivity-Enhanced Refractive Index Sensor Using A Single-Mode Thin-Core Fiber Incorporating an Abrupt Taper