Abstract:The Ni3Al and Ni3Al-B-Cr alloys were fabricated by the self-propagation high-temperature synthesis with hot extrusion method. Their microstructure and mechanical properties were studied by using combination of X-ray diffraction, optical microscopy, transmission electron microscopy and compression test. Analysis of X-ray spectra exhibited that the elemental powders had been transformed to the Ni3Al phase after the self-propagation high-temperature synthesis processing. Microstructure examination showed that the alloy without extrusion consisted of coarse and fine grains, but the subsequent hot extrusion procedure homogenized the grain size and densified the alloy obviously. Transmission electron microscopy observations on the Ni3Al alloy revealed that Ni3Al, γ-Ni and Al2O3 particles were the main phases. When the boron and chromium were added, besides the β-NiAl phase, α-Cr phase and some Cr7Ni3 particles with stacking faults inside were observed. In addition, a lot of substructure and high-density dislocation arrays were observed in the extruded part, which indicated that the subsequent extrusion had led to great deformation and partly recrystallizing in the alloy. Moreover, the subsequent extrusion procedure redistributed the Al2O3 particles and eliminated the γ-Ni. These changes were helpful to refine the microstructure and weaken the misorientation. The mechanical test showed that the self-propagation high-temperature synthesis with hot extrusion improved the mechanical properties of the Ni3Al alloy significantly. The addition of B and Cr in Ni3Al alloy increased the mechanical properties further, but the compressive strength of the alloy was still lower than that synthesized by combustion. Finally, the self-propagation high-temperature synthesis with hot extrusion was a good method to prepare Ni3Al alloy from powder.

Investigation on Trace Dysprosium and Boron Doping NiAl-based Eutectic Alloy Fabricated by Injection Casting

Microstructure and Mechanical Properties of Rapidly Solidified NiAl–Cr(Mo) Eutectic Alloy Doped with Trace Dy

Microstructure and compressive properties of NiAl–Cr(Mo)–Dy near eutectic alloy prepared by suction casting

Microstructure and Mechanical Properties of NiAl–Cr(Mo)/Nb Eutectic Alloy Prepared by Injection-Casting

Investigation on B, Cr Doped Ni3Al Alloy Prepared by Self-Propagation High-Temperature Synthesis and Hot Extrusion

Microstructure Evolution and Elevated Temperature Compressive Properties of a Rapidly Solidified NiAl–Cr(Nb)/Dy Alloy

Effect of Trace Boron Addition on the Microstructural Evolution and Mechanical Properties in Ti45al8nb2cr-B Alloys

Microstructure and Mechanical Properties of Hf and Ho Doped NiAl–Cr(Mo) Near Eutectic Alloy Prepared by Suction Casting

Optimization of the Microstructure and Mechanical Properties of a Laves Phase-Strengthened Hypoeutectic NiAl/Cr(Mo,W) Alloy by Suction Casting

Investigations on the Solidification Microstructures and Room Temperature Compression Properties of Nb-doped NiAl-32Cr-6Mo Hypereutectic Alloy

Microstructure and Mechanical Properties of Zirconium Doped Nial/Cr(Mo) Hypoeutectic Alloy Prepared by Injection Casting

Investigations on the NiAl–Cr(Mo) Eutectic Alloy with Optimized Microstructure and Improved Room-Temperature Compressive Properties

Effect of Boron Doping on Microstructure of Directionally Solidified Ti–46Al–2Cr–2Nb Alloy

Microstructure and mechanical properties of the alloys NiAl and NiAl-28Cr-6Modoped with rare-earth Sc

Microstructure Evolution and Mechanical Properties of a Directionally Solidified Nb-Ti-Si-Cr-Al-Hf-Dy Alloy

Effect of Rare Earth Dy (dysprosium) on the Microstructures and Mechanical Properties of Hypereutectic Al–Si Alloy

Revealing the nano-grained microstructure and mechanical properties of electrochemical boronized AlCoCrFeNi 2.1 eutectic high entropy alloy

Effects of alloying elements on the electronic structure and ductility of NiAl compounds investigated by X-ray absorption fine structure

Effects of Aluminum on Microstructure and Compressive Properties of Al-Cr-Fe-Ni Eutectic Multi-Component Alloys

Microstructure and Mechanical Properties of Ni3Al and Ni3Al–1B Alloys Fabricated by SHS/HE

Simultaneously Enhanced Strength-Ductility of AlCoCrFeNi2.1 Eutectic High-Entropy Alloy Via Additive Manufacturing