Abstract:A temperature-compensated fiber Bragg grating (FBG) axial strain sensor based on a two-dual-loop optoelectronic oscillator (OEO) with the enhanced Vernier effect is proposed and experimentally demonstrated. The sensing head consists of two cascaded FBGs, one of which acts as a sensing FBG to measure both the axial strain and temperature and the other as a reference FBG to detect temperature. Acting as the optical carrier, the reflected optical signal of the sensing head is divided into two paths with opposite dispersion coefficients and slightly different lengths to achieve an enhanced Vernier effect. After being divided by a wavelength division multiplexer, the optical signal launches into two electrical paths with different electrical bandpass filters (EBPFs) for frequency division multiplexing. The EBPF I selects the microwave signal generated by the sensing FBG, while the EBPF II selects the microwave signal generated by the reference FBG. Therefore, the axial strain and temperature can be recovered by recording the microwave frequency within EBPF I, and the temperature can be interrogated by tracking the microwave frequency within EBPF II. The axial strain applied on the sensing FBG can be distinguished by solving the cross-sensitivity matrix. The results show that the sensitivity of the dual-loop OEO is much greater than that of the single-loop OEO. The maximum measurement error for the axial strain is 0.112µε, and the maximum temperature compensation error is as low as 0.024°C in the dual-loop OEO, which is far less than that in the single-loop OEO. The enhanced Vernier effect not only improves the sensitivity, but also reduces the temperature compensation error.

Ultra-highly Sensitive FBG Sensor Assisted by Optical Parametric Amplification and High-order FWM

Sensitivity enhanced strain and temperature measurements based on FBG and frequency chirp magnification.

Strain Sensitivity Enhancement for FBG Sensors by All-Optical Frequency Chirp Magnification with High-Order Cascaded FWM

FBG Sensor for Strain Measurement with Enhanced Sensitivity by Using Degenerated FWM in Highly Nonlinear Fibre

Sensitivity Enhancement For Fiber Bragg Grating Sensors By Four Wave Mixing

Fiber Bragg grating sensing system for temperature measurements based on optically injected DFB-LD with an OEO loop

High-Spatial-Resolution High-Temperature Sensor Based on Ultra-Short Fiber Bragg Gratings With Dual-Wavelength Differential Detection

Highly Sensitive Optoelectronic Oscillator-Based FBG Sensor via Coarse Sampling and Vernier Effect

FBG Interrogator Using a Dispersive Waveguide Chip and a CMOS Camera

High sensitivity fiber optic strain sensor based on CFBG-FPI and vernier effect

High-Resolution Strain/Temperature Sensing System Based on A High-Finesse Fiber Cavity and Time-Domain Wavelength Demodulation

High-precision temperature-compensated fiber Bragg grating axial strain sensing system based on a dual-loop optoelectronic oscillator with the enhanced Vernier effect

Highly Integrated Fp/Fbg Sensor for Simultaneous Measurement of High Temperature and Strain

An FBG-FPI Accelerometer Based on Femtosecond Laser-Written Ultrashort Fiber Bragg Gratings

Integrated Fp/Rfbg Sensor with A Micro-Channel for Dual-Parameter Measurement under High Temperature

Highly Integrated All-Fiber FP/FBG Sensor for Accurate Measurement of Strain under High Temperature

Sensitivity Enhanced Strain Measurement Based on an FBG Sensor Assisted by Frequency Chirp Magnification

A Cheap and Practical FBG Temperature Sensor Utilizing a Long-Period Grating in a Photonic Crystal Fiber

A Temperature and Strain Sensor Based on a Cascade of Double Fiber Bragg Grating

High-order fiber Bragg grating fabricated by femtosecond laser pulses for high-sensitivity temperature and strain sensing

Design and Analysis of a Combined FBG Sensor for the Measurement of Three Parameters.