Abstract:A methodology for evaluating the response of embedded fibre Bragg grating (FBG) sensors in composite structures based on the strain in a host material is introduced. In applications of embedded FBG sensors as strain sensing devices, it is generally assumed that the strain experienced in a fibre core is the same as the one measured in the host material. The FBG sensor is usually calibrated by a strain gauge through a tensile test, centred on obtaining the relationship between the surface strain in the host material and the corresponding Bragg wavelength shift obtained from the FBG sensor. However, such a calibration result can only be valid for uniform strain measurement. When the strain distribution along a grating is non-uniform, average strain measured by the strain gauge cannot truly reflect the in-fibre strain of the FBG sensor. Indeed, the peak in the reflection spectrum becomes broad, may even split into multiple peaks, in sharp contrast with a single sharp peak found in the case of the uniform strain measurement. In this paper, a strain transfer mechanism of optical fibre embedded composite structure is employed to estimate the non-uniform strain distribution in the fibre core. This in-fibre strain distribution is then utilized to simulate the response of the FBG sensor based on a transfer-matrix formulation. Validation of the proposed method is preceded by comparing the reflection spectra obtained from the simulations with those obtained from experiments.

FBG Sensor for Strain Measurement with Enhanced Sensitivity by Using Degenerated FWM in Highly Nonlinear Fibre

Nanoimprinted Polymer Micro/Nanofiber Bragg Gratings for High-Sensitivity Strain Sensing

Strain Sensor Based on Gourd-Shaped Single-Mode-multimode-single-mode Hybrid Optical Fibre Structure.

Modeling and analysis of localized biosensing and index sensing by introducing effective phase shift in microfiber Bragg grating (μFBG)

High sensitivity fiber optic strain sensor based on CFBG-FPI and vernier effect

An optimized strain demodulation method based on dynamic double matched fiber Bragg grating filtering

Research On Measurement Of Fiber Bragg Grating Considering The Cross-Sensitivity Of Temperature And Strain

Sensitivity-Enhanced Strain Sensor With a Wide Dynamic Range Based on a Novel Long-Period Fiber Grating

Sensitivity-Tunable FBG Interrogation System Utilizing a Mechanically Induced Long Period Fiber Grating

Intensity-Modulated Fiber Bragg Grating Sensor System Based on Radio-Frequency Signal Measurement

Static Pure Strain Sensing Using Dual-Comb Spectroscopy with FBG Sensors.

A High-Resolution Demodulation Algorithm for FBG-FP Static-Strain Sensors Based on the Hilbert Transform and Cross Third-Order Cumulant

The Strain Sensor with Enhanced Sensitivity Based on Improved Optical Fiber Michelson Interferometer

High-Resolution Strain/Temperature Sensing System Based on A High-Finesse Fiber Cavity and Time-Domain Wavelength Demodulation

A High Sensitivity FBG Strain Sensor Based on Flexible Hinge

Development of a High-Sensitivity and Adjustable FBG Strain Sensor for Structural Monitoring

Embedded fibre Bragg grating sensors for non-uniform strain sensing in composite structures

Dynamic strain measurement using two wavelength-matched fiber Bragg grating sensors interrogated by a cascaded long-period fiber grating

A Novel Fiber Bragg Grating Sensor Interrogation System Utilizing a Tunable Fabry-Perot Filter

A study on fiber Bragg grating (FBG) strain sensor based on symmetrical lever structure

Highly Sensitive Strain Sensor Based on a Long-Period Fiber Grating with Chain-Shaped Structure.