Abstract:CO2 hydrogenation to gasoline fuels remains a sticky problem of CO selectivity from reverse water-gas shift reactions over a metal oxide and zeolite bifunctional catalyst. Herein, we report an efficient catalyst combining a Fe–Zn–Zr–T oxide hydrothermally treated with TPABr solution and HZSM-5 zeolite for CO2 hydrogenation into high-quality gasoline. The hydrothermal treatment contributes to the obvious enrichment of the Zn component and the residual Br on the surface of Fe–Zn–Zr–T oxide, as compared to Fe–Zn–Zr oxide, as well as the increased number of oxygen vacancies. These surface properties not only induce the increase of the H2 adsorption and CO2 adsorption ratio but also enhance the adsorption strength of the HCOO* species and the desorption rate of CH3O* species (close intermediate of methanol) over Fe–Zn–Zr–T oxide, which are responsible for higher methanol selectivity and lower CO selectivity. Furthermore, the presence of the adsorbed CO* species and higher C2+ hydrocarbon selectivity on Fe–Zn–Zr oxide affirm the F–T route of CO2 hydrogenation except for the methanol route, while the F–T route is effectively restrained after the TPABr hydrothermal treatment of Fe–Zn–Zr–T oxide. As the Fe and Zn–Zr molar ratio decreases, more HCOO* and CH3O* species on Fe–Zn–Zr (0.1:1:1)–T–24 h can form, which is in good agreement with the much higher methanol selectivity on Fe–Zn–Zr (0.1:1:1)–T–24 h oxide and hydrocarbon selectivity on the Fe–Zn–Zr(0.1:1:1)–T–24 core–shell catalyst. The CO selectivity and C5+ isoalkane selectivity in gasoline on Fe–Zn–Zr(0.1:1:1)–T–24 are up to 24% and 93%, respectively, with a CO2 conversion of 18%. The good matching of the Fe–Zn–Zr–T oxide and HZSM-5 zeolite plays the crucial role in the C5+ isoalkanes selectivity in gasoline over the Fe–Zn–Zr– core–shell catalyst.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acscatal.0c04155?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acscatal.0c04155</a>.Tables of the textural characteristics, surface atomic concentrations, and peak areas integrated from NH3-TPD profiles; FT-IR and EPR spectra; in situ XRD patterns; NH3-TPD profiles; HRTEM images; oxygen compound distributions; catalytic performances; and in situ DRIFT spectra (<a class="ext-link" href="/doi/suppl/10.1021/acscatal.0c04155/suppl_file/cs0c04155_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Highly efficient polyoxometalate-based catalysts for clean-gasoline synthesis

Direct Production of Hydrocarbons by Fischer-Tropsch Synthesis Using Newly Designed Catalysts

Highly Selective Production of C5-C12 Hydrocarbons over Efficient Ru/heteropoly-acid Catalysts

Wells-Dawson type Cs5.5H0.5P2W18O62 based Co/Al2O3 as binfunctional catalysts for direct production of clean-gasoline fuel through Fischer-Tropsch synthesis

Design of novel porous Fe2O3 cage catalyst for production of gasoline fuels via coupling Fischer-Tropsch with zeolite cracking

Enhanced Fischer-Tropsch synthesis performance on fe + ZSM5 bifunctional catalysts

A Highly Selective Raney Fe@HZSM-5 Fischer–Tropsch Synthesis Catalyst for Gasoline Production: One-Pot Synthesis and Unexpected Effect of Zeolites

Enhanced Conversion of Syngas to Gasoline-Range Hydrocarbons over Carbon Encapsulated Bimetallic FeMn Nanoparticles

Fischer-Tropsch Reaction Within Zeolite Crystals for Selective Formation of Gasoline-Ranged Hydrocarbons

Porous Carbon-Supported Cobalt Catalyst for CO Hydrogenation to Gasoline Range Hydrocarbons

Toward a Full One-Pass Conversion for the Fischer–Tropsch Synthesis over a Highly Selective Cobalt Catalyst

Gasoline-Range Hydrocarbon Synthesis over Cobalt-Based Fischer–Tropsch Catalysts Supported on SiO2/HZSM-5

New Insights for High-Throughput CO2 Hydrogenation to High-Quality Fuel

Highly Selective Conversion of Syngas to Higher Oxygenates over Tandem Catalysts

Highly Dispersed CoO Embedded on Graphitized Ordered Mesoporous Carbon as an Effective Catalyst for Selective Fischer–Tropsch Synthesis of C5+ Hydrocarbons

Effective Suppression of CO Selectivity for CO 2 Hydrogenation to High-Quality Gasoline

Enhanced Formation of Multi-Branched Isoparaffins in Syngas Conversion by ZnCrOx-MCM-22 Composites

Hydrophobic Fe‐Based Catalyst Derived from Prussian Blue for Enhanced Photothermal Conversion of Syngas to Light Olefins

Conversion of CO2 hydrogenation to gasoline over tandem Fe/C and HZSM-5 catalysts

One-step Synthesis of Gasoline Fuels from Γ-Valerolactone with High Selectivity over Cu/HZSM-5 Bifunctional Catalyst

Integrated tuneable synthesis of liquid fuels via Fischer–Tropsch technology