Abstract:CO2 hydrogenation to gasoline fuels remains a sticky problem of CO selectivity from reverse water-gas shift reactions over a metal oxide and zeolite bifunctional catalyst. Herein, we report an efficient catalyst combining a Fe–Zn–Zr–T oxide hydrothermally treated with TPABr solution and HZSM-5 zeolite for CO2 hydrogenation into high-quality gasoline. The hydrothermal treatment contributes to the obvious enrichment of the Zn component and the residual Br on the surface of Fe–Zn–Zr–T oxide, as compared to Fe–Zn–Zr oxide, as well as the increased number of oxygen vacancies. These surface properties not only induce the increase of the H2 adsorption and CO2 adsorption ratio but also enhance the adsorption strength of the HCOO* species and the desorption rate of CH3O* species (close intermediate of methanol) over Fe–Zn–Zr–T oxide, which are responsible for higher methanol selectivity and lower CO selectivity. Furthermore, the presence of the adsorbed CO* species and higher C2+ hydrocarbon selectivity on Fe–Zn–Zr oxide affirm the F–T route of CO2 hydrogenation except for the methanol route, while the F–T route is effectively restrained after the TPABr hydrothermal treatment of Fe–Zn–Zr–T oxide. As the Fe and Zn–Zr molar ratio decreases, more HCOO* and CH3O* species on Fe–Zn–Zr (0.1:1:1)–T–24 h can form, which is in good agreement with the much higher methanol selectivity on Fe–Zn–Zr (0.1:1:1)–T–24 h oxide and hydrocarbon selectivity on the Fe–Zn–Zr(0.1:1:1)–T–24 core–shell catalyst. The CO selectivity and C5+ isoalkane selectivity in gasoline on Fe–Zn–Zr(0.1:1:1)–T–24 are up to 24% and 93%, respectively, with a CO2 conversion of 18%. The good matching of the Fe–Zn–Zr–T oxide and HZSM-5 zeolite plays the crucial role in the C5+ isoalkanes selectivity in gasoline over the Fe–Zn–Zr– core–shell catalyst.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acscatal.0c04155?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acscatal.0c04155</a>.Tables of the textural characteristics, surface atomic concentrations, and peak areas integrated from NH3-TPD profiles; FT-IR and EPR spectra; in situ XRD patterns; NH3-TPD profiles; HRTEM images; oxygen compound distributions; catalytic performances; and in situ DRIFT spectra (<a class="ext-link" href="/doi/suppl/10.1021/acscatal.0c04155/suppl_file/cs0c04155_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

A Highly Selective Raney Fe@HZSM-5 Fischer–Tropsch Synthesis Catalyst for Gasoline Production: One-Pot Synthesis and Unexpected Effect of Zeolites

Effect of Shell Thickness on Skeletal Fe@HZSM-5 Core-Shell Catalysts for Fischer-Tropsch Synthesis

Design of novel porous Fe2O3 cage catalyst for production of gasoline fuels via coupling Fischer-Tropsch with zeolite cracking

Enhanced Fischer-Tropsch synthesis performance on fe + ZSM5 bifunctional catalysts

Highly Tunable Selectivity for Syngas‐Derived Alkenes over Zinc and Sodium‐Modulated Fe5C2 Catalyst

Highly Selective Production of C5-C12 Hydrocarbons over Efficient Ru/heteropoly-acid Catalysts

Fischer-Tropsch Reaction Within Zeolite Crystals for Selective Formation of Gasoline-Ranged Hydrocarbons

Direct Conversion of Syngas to Gasoline Ranged Olefins over Na Impellent Fe@NaZSM-5 Catalyst

Boosting liquid hydrocarbons selectivity from CO2 hydrogenation by facilely tailoring surface acid properties of zeolite via a modified Fischer-Tropsch synthesis

Effective Suppression of CO Selectivity for CO 2 Hydrogenation to High-Quality Gasoline

One-pot green synthesis of Fe-ZSM-5 zeolite containing framework heteroatoms via dry gel conversion for enhanced propylene selectivity of catalytic cracking catalyst

Integrated tuneable synthesis of liquid fuels via Fischer–Tropsch technology

Highly efficient polyoxometalate-based catalysts for clean-gasoline synthesis

Enhanced Conversion of Syngas to Gasoline-Range Hydrocarbons over Carbon Encapsulated Bimetallic FeMn Nanoparticles

Direct synthesis of H type ZSM-5 in shaped form and catalytic properties in methanol-to-hydrocarbon reaction

High Selectivity to Aromatics by a Mg and Na Co-modified Catalyst in Direct Conversion of Syngas

ZSM‐5‐Promoted Co‐Based Light‐Assisted Thermocatalytic Fischer–Tropsch Synthesis Catalyst for Production of Liquid Fuel

Selective fabrication of χ-Fe5C2 by interfering surface reactions as a highly efficient and stable Fischer-Tropsch synthesis catalyst

Accelerating syngas-to-aromatic conversion via spontaneously monodispersed Fe in ZnCr2O4 spinel

Harnessing the Synergistic Interplay of Fischer‐Tropsch Synthesis (Fe‐Co) Bimetallic Oxides in Na‐FeMnCo/HZSM‐5 Composite Catalyst for Syngas Conversion to Aromatic Hydrocarbons

Direct Transformation of Syngas to Aromatics over Na-Zn-Fe5C2 and Hierarchical HZSM-5 Tandem Catalysts