Abstract:The direct synthesis of light olefins from syngas via Fischer-Tropsch synthesis reaction is a promising technology for direct synthesis of olefins from syngas. The key is to improve the selectivity of light olefins through the regulation of product distribution. In this work, the hydrophobic Fe@Si catalyst was prepared by room temperature solid state methodStober-silylation method, and then the catalyst was combined with SAPO-34 molecular sieves with different contents to prepare Fe@Si/S-34 composite catalysts. The effects of SAPO-34 molecular sieve content on the physicochemical properties of the catalysts were investigated by X-ray diffraction, scanning electron microscopy, N-2 adsorption-desorption, NH3 temperature programmed desorption and water contact angle measurement. The results showed that the content of SAPO-34 molecular sieve has significant influence on the surface area, pore volume, acidity and hydrophobicity of the catalysts. With the increase of SAPO-34 molecular sieve content, the specific surface area and total pore volume of the catalyst increased, the weak acid and medium-strong acid sites increased, and the hydrophobicity weakened. The catalytic performance evaluation results showed that the Fe@Si/S-34 composite catalyst decomposed C5+ hydrocarbons into light hydrocarbons, significantly reduced the selectivity of C5+ products and increased the selectivity of C2 similar to C4 hydrocarbons. Appropriate SAPO-34 molecular sieve could significantly improve the selectivity of C2 similar to C-4 olefins. When the mass ratio of Fe@Si catalyst to SAPO-34 is 2, the C-2 similar to C-4 olefin selectivity of Fe@Si/S-34 catalyst is the highest, the conversion of CO is 80.0%, the selectivity of CO2 in the product is 8.9%, and the selectivity of C-2 similar to C-4 olefins is 31.1%. In this study, the hydrophobicity of Fe@Si catalyst and the cracking activity of SAPO-34 molecular sieve for C5+ hydrocarbon were coupled together to inhibit the water-gas shift (WGS) reaction, reduce the CO2 selectivity and obtain higher C-2 similar to C-4 olefin selectivity, which provided a new strategy for the development of catalysts for Fischer-Tropsch synthesis to olefins.

Highly Selective Production of C5-C12 Hydrocarbons over Efficient Ru/heteropoly-acid Catalysts

Direct Production of Hydrocarbons by Fischer-Tropsch Synthesis Using Newly Designed Catalysts

Selective Hydrogenation of Furfural to Furfuryl Alcohol Without External Hydrogen over N-doped Carbon Confined Co Catalysts

Preparation of Fe@Si/S-34 Catalysts and Its Catalytic Performance for Syngas to Olefins

Highly efficient polyoxometalate-based catalysts for clean-gasoline synthesis

A Highly Selective Raney Fe@HZSM-5 Fischer–Tropsch Synthesis Catalyst for Gasoline Production: One-Pot Synthesis and Unexpected Effect of Zeolites

Fischer-Tropsch Reaction Within Zeolite Crystals for Selective Formation of Gasoline-Ranged Hydrocarbons

Highly Efficient Fischer-Tropsch Synthesis Over An Alumina-Supported Ruthenium Catalyst

Boosting liquid hydrocarbons selectivity from CO2 hydrogenation by facilely tailoring surface acid properties of zeolite via a modified Fischer-Tropsch synthesis

Design of novel porous Fe2O3 cage catalyst for production of gasoline fuels via coupling Fischer-Tropsch with zeolite cracking

Enhanced Fischer-Tropsch synthesis performance on fe + ZSM5 bifunctional catalysts

Liquid fuel synthesis via CO2 hydrogenation by coupling homogeneous and heterogeneous catalysis

Improved Fischer-Tropsch synthesis for gasoline over Ru, Ni promoted Co/HZSM-5 catalysts

Highly Tunable Selectivity for Syngas‐Derived Alkenes over Zinc and Sodium‐Modulated Fe5C2 Catalyst

Overturning CO2 Hydrogenation Selectivity by Tailoring the Local Electron Density of Ru/CeO2 Catalysts

Enhanced ruthenium selectivity for the conversion of FAMEs to diesel-range alkanes by surface decoration of FeO x species

Highly Selective Conversion of Syngas to Higher Oxygenates over Tandem Catalysts

Catalyst design for maximizing C5+ yields during Fischer-Tropsch synthesis

Toward a Full One-Pass Conversion for the Fischer–Tropsch Synthesis over a Highly Selective Cobalt Catalyst

A Cationic Ru(II) Complex Intercalated into Zirconium Phosphate Layers Catalyzes Selective Hydrogenation via Heterolytic Hydrogen Activation

Design of novel hierarchical cage active particles and zeolite for direct conversion of syngas to gasoline fuel