Abstract:Three mosaic sensors, that is, WO3/carbon nanofibers (CNFs), SnO2/CNFs and MoS2/CNFs, are prepared through an efficient electrospinning and the followed thermal treatment strategy, showing high room‐temperature sensibility, low detection concentration and cross‐sensitivity to methane and other four target analytes in transformer oil, and preliminary discrimination of these target analytes is realized by principle component analysis. Hydrocarbons and carbon oxides are typical dissolved gases in transformer oil that reflect the latent pitfalls, on‐line monitoring of their concentrations can effectively evaluate the operating status of the power transformer. However, these low‐concentration targets (especially for CH4) show high chemical inertness at room temperature, challenging the sensitive performance of current commonly used chemiresistive gas sensors. Herein, a strategy by combining traditional inorganic semiconductors to carbon nanofiber (CNF) via electrospinning–annealing route is described. Three optimized 3D mosaic films, CNFs scaffold incorporated with WO3, SnO2 and MoS2 nanoparticles, are obtained. Due to the large specific surface area of the 3D network, and the synergic and heterojunction effects between nanoparticles and CNFs, all three sensors exhibit high response to CH4 at room temperature, and also record distinguishable signals toward H2, C2H4, CO and CO2, revealing the three sensors are cross‐sensitive to the five analytes. Accordingly, preliminary discrimination of five dissolved gases is realized by principle component analysis. This study provides an effective and extendable solution of preparing room‐temperature chemiresistive sensors for the detection of CH4 and other gases, and offers a strategy for the construction of sensor array to achieve a high discrimination capability.

The Research On Simultaneous Detection Of Dissolved Gases In Transformer Oil Using Raman Spectroscopy

Wireless Monitoring And Analysing System Of Dissolved Gases In The Transformer Oil

Development of an Online Detection Setup for Dissolved Gas in Transformer Insulating Oil

On-line detection of gases dissolved in transformer oil based on GPRS/GSM

Design and Realization of the Wireless Data Acquirement Terminal of Dissolved Gas in Transformer Oil

Quantitative Analysis of FTIR Used in Transformer On-line Monitoring

Application of Photo-acoustic Spectroscopy Technology to Dissolved Gas Analysis of Oil-immersed Power Transformer

Chemical Sensing Strategies for Real-Time Monitoring of Transformer Oil: A Review

3D Mosaic Carbon Nanofiber Sensors for Room‐Temperature Detection of Methane and Other Dissolved Gases in Transformer Oil

New Sensor for Gases Dissolved in Transformer Oil Based on Solid Oxide Fuel Cell

Research on fault diagnosis of transformer based on laser induced fluorescence technology

Low-Power Chemiresistive Gas Sensors for Transformer Fault Diagnosis

A Methodology to Diagnose Transformer Faults Based on the Multi-Objective Optimization and the Case-Based Reasoning

Transformer Oil Quality Evaluation Using Quantitative Phase Microscopy.

A highly sensitive low-pressure TDLAS sensor for detecting dissolved CO and CO 2 in transformer insulating oil

Derivatization reaction-based surface-enhanced Raman scattering for detection of methanol in transformer oil using Ag/ZnO composite nanoflower substrate

Dissolved gas monitoring probe without liquid-gas separation under strong electromagnetic interference

A Highly Sensitive and Durable Sensor for In Situ Hydrogen Measurement in Transformer Oil

Research on Vibration Characteristic Analysis and Fault Diagnosis Method of Oil‐Immersed Transformer Based on Multi‐Physics Coupling

Interpreting dissolved gases in transformer oil: A new method based on the analysis of labelled fault data

Portable ppb-level acetylene photoacoustic sensor for transformer on-field measurement