Abstract:Based on principles of chemical thermodynamics, the relationship between temperature and the Gibbs free energy of erosion products generated during the sulfate attack on cement concrete was deduced. The orientation of chemical reactions of sulfate attack on cement concrete was theoretically determined as well as the critical sulfate ion concentration and the formation conditions of erosion products. The phase composition, microstructure, crystal form, and morphology of erosion products before and after sulfate attack were investigated by environmental scanning electron microscope and energy spectrum analysis (ESEM-EDS) and X-ray diffraction (XRD). The results show that the effects of sulfate ion concentration and temperature on cement concrete sulfate attack are significant, and different influencing factors correlate with each other. The crystal transition temperature between the anhydrite and dihydrate gypsum is 42°C, and the corresponding concentration of sulfate ion is about 2.3 × 10 −3 mol/L. Simultaneously, the crystal transition temperature between the thenardite and mirabilite is 32.4°C. Moreover, the theoretical upper limit temperature and sulfate ion lower limit concentration of thaumasite are 44°C and 0.0023 mol/L, respectively. The ESEM-EDS and XRD results imply that the chemical thermodynamics can be used to reveal the erosion mechanism of sulfate attack on cement concrete. The major erosion products of sulfate attack on cement concrete are rod-like ettringite with a larger slenderness ratio, plate-like gypsum, granular sulfate salt, incompletely corroded calcium hydroxide, and residual skeleton of calcium silicate hydrate. The sulfate attack has double effects on mechanical properties of specimens, which can affect the microstructure, phase composition, type, and morphology of erosion products.

SULFATE ATTACK - ETTRINGITE, GYPSUM AND THAUMASITE

PHYSICAL AND CHEMICAL SIMULATION OF THE THAUMASITE FORM OF SULFATE ATTACK ON CONCRETE

THAUMASITE FORM OF SULFATE ATTACK ON DIFFERENT VARIETY OF CEMENT

Review of Thaumasite Sulfate Attack on Cement Mortar and Concrete

FACTORS AFFECTING THAUMASITE FORM OF SULFATE ATTACK ON CEMENT-BASED MATERIAL

Thaumasite form of sulfate attack in ettringite rich-ternary systems: Effects of limestone filler, etching solutions and exposure temperature

Thaumasite attack of Bapanxia Hydraulic Power Plant, China

Attack of Limestone Cement-Based Material Exposed to Magnesium Sulfate Solution at Low Temperature

RESEARCH ON MECHANISM OF SULFATE ATTACK ON CONCRETE BY TG-DSC METHOD

Impact of the Thaumasite Sulfate Attack on the Pore Structure and Gas Permeability of Cement Mortar

Mechanism of Formation of Thaumasite in Cement-Based Materials in Corrosive Environment

Risk Assessment and Diagnostic Method of Sulfate Attack of Cement-Based Material

A Review on the Transport-Chemo-Mechanical Behavior in Concrete under External Sulfate Attack

Research on Sulfate Attack Mechanism of Cement Concrete Based on Chemical Thermodynamics

Form and Mechanism of Sulfate Attack of Cement-based Material Exposed to Different Corrosion Circumstance

Thaumasite form of sulfate attack on different variety of water reducing agent

The thaumasite form of sulfate attack in concrete of Yongan Dam

Performance Development of Cement Mortar Subject to Thaumasite Form of Sulfate Attack

Sulfate Crystallization Attack on Cement-Based Materials

Deterioration Mechanisms of Sulfate Attack on Concrete under Alternate Action

Effect of Gypsum on Thaumasite Form of Sulfate Attack