Abstract:The supercritical CO2 corrosion problems of oil country tubular goods (OCTG) become increasingly prominent along with the application of CO2 flooding enhanced oil recovery (EOR) technique and the exploitation of deep oil wells under high temperature and high pressure. Actually, OCTG steel often suffers from multiphase fluid corrosion of crude oil, water and supercritical CO2 at different stages of oil and gas production. However, studies about CO2 corrosion of carbon steel used for oil and gas production generally are carried out considering only the aqueous phase without proper consideration of the oil phase that may be present. The crude oil in crude oil/water production environments is a key factor affected the corrosion behavior of carbon steel. Corrosion rate and corrosion type of J55 steel were investigated under the conditions of different oil/water ratios saturated with supercritical CO2. SEM, EDS and XRD were employed to analyze the morphology and characteristic of corrosion scale on the steel. The corrosion models were developed to understand the corrosion mechanism with consideration of a variation of oil/water ratio in reality. The results show that uniform corrosion occurs along with the lower corrosion rate due to the protection of crude oil when the water cut of crude oil is within the range, i.e., 0 similar to 30% and the water-in-oil fluid is formed. But the local corrosion rate of the steel increases rapidly due to the inhomogeneous adsorption of crude oil with the fluid changing from water-in-oil to oil-in-water emulsion when the water cut is between 30% and 75%. The corrosion products deposited on the steel surface change the wettability of oil and water phase, therefore, water phase can preferentially wet the localized deposited scale, leading to the development of pitting corrosion under the scale. However, when the water cut is higher than 75% and the oil-in-water fluid is formed, water phase infiltrates the metal surface that blocks the corrosion inhibition of crude oil for the steel, hence, the corrosion rate increases dramatically. The localized failure of corrosion scale due to scouring action of the fluid and the dissolution of aggressive medium leads to mesa corrosion on the steel. When. the water cut is 100%, serious uniform corrosion occurs as a result of the strong corrosiveness of supercritical CO2 dissolved in the water phase. Furthermore, crude oil can weaken the dissolution of corrosion scale in the supercritical corrosive medium, which modifies the grain size, morphology and chemical composition of corrosion scale and improves the protection performance of the scale.

Corrosion Mechanism of Octg Carbon Steel in Supercritical Co2/Oil/Water System

Revealing the Effect of O2, SO2 and H2O in Supercritical CO2 on the Corrosion Behavior of 316L Steel at Elevated Temperature

Corrosion Behavior of Oil Tube Steels under Conditions of Multiphase Flow Saturated with Super-Critical Carbon Dioxide

Study on Corrosion Characteristics of Heat-resistant Materials in Supercritical Carbon Dioxide Environment Containing Oxygen Impurities

Corrosion Behavior and Mechanism of Oil Casing Steel in CO2 Salt Solution

Corrosion Behavior of J55 and N80 Carbon Steels in Simulated Formation Water under Different CO2 Partial Pressures

Effect of High-Concentration O2on Corrosion Behavior of X70 Steel in Water-Containing Supercritical CO2with SO2

Unraveling the Impact of Cr Content on the Corrosion of Tubing Steel in High CO2 and Low H2S Environments

Effect of impurities on the corrosion behavior of CO2 transmission pipeline steel in supercritical CO2-water environments

Corrosion behaviour of X80 pipeline steel welded joint in H2O- saturated supercritical-CO2 environment

Effect of CO2 Partial Pressure on the Corrosion Behavior of J55 Carbon Steel in 30% Crude Oil/Brine Mixture

Investigation of Supercritical CO2 Corrosion Behavior of X80 Carbon Steel in Pipelines: an in Situ Experimental and DFT Study

Effect of H2O Content on the Corrosion Behavior of X52 Steel in Supercritical CO2 Streams Containing O2, H2S, SO2 and NO2 Impurities

Effect of CO2 content on corrosion non-uniformity of 20# steel in oil–water two-phase based on wire beam electrode technique

Experimental Study on Corrosion Performance of Oil Tubing Steel in HPHT Flowing Media Containing O2 and CO2

Cross Impact of CO2 Phase and Impurities on the Corrosion Behavior for Stainless Steel and Carbon Steel in Water-Containing Dense CO2 Environments

Experimental Study on Corrosion of J55 Casing Steel and N80 Tubing Steel in High Pressure and High Temperature Solution Containing CO2 and NaCl

Corrosion behaviors of steels under supercritical CO2 conditions

Effect of Temperature on Corrosion Behavior and Mechanism of S135 and G105 Steels in CO2/H2S Coexisting System

Corrosion behavior of X70 steel in the supercritical CO2 mixed with SO2 and saturated water

Effect of Flow on the Corrosion Behavior of Pipeline Steel in Supercritical CO2 Environments with Impurities