Abstract:A combined analytical and experimental approach is presented to characterize both mode-II and mixed mode fracture of Carbon fiber-reinforced polymer-concrete bonded interfaces under four-point bending load, and closed-form solutions of compliance and energy release rate of the mode-II (four-point symmetric end-notched flexure) and mixed (four-point asymmetric end-notched flexure) mode fracture specimens are provided. The transverse shear deformation in each sub-layer of bi-material bonded beams is included by modeling each sub-layer as an individual first order shear deformable beam, and the effect of interface crack tip deformation on the compliance and energy release rate are taken into account by applying the interface deformable bi-layer beam theory (i.e., the flexible joint model). The improved accuracy of the present analytical solutions for both the compliance and energy release rate is illustrated by comparing with the solutions predicted by the conventional rigid joint model and finite element analysis. The fracture of Carbon fiber-reinforced polymer-concrete bonded interface is experimentally evaluated using both the four-point symmetric and asymmetric end-notched flexure specimens, and the corresponding values of critical energy release rates are obtained. Comparisons of the compliance rate-changes and resulting critical energy release rates based on the rigid joint model, the present theoretical model, and numerical finite element analysis demonstrate that the crack tip deformation plays an important role in accurately characterizing the mixed mode fracture toughness of hybrid material bonded interfaces under four-point bending load. The improved solution of energy release rates for the four-point symmetric and asymmetric end-notched flexure specimens by the flexible joint model can be used to effectively characterize hybrid material interface, and the fracture toughness values obtained for the Carbon fiber-reinforced polymer-concrete interface under mode-II and mixed mode loading can be employed to predict the interface fracture load of concrete structures strengthened with composites.

Characterization of Mode-II Fracture of Bi-Material Bonded Interfaces Using Tapered ENF Specimen

Analysis of Tapered ENF Specimen and Characterization of Bonded Interface Fracture under Mode-II Loading

Mode-II Fatigue Fracture of Bi-material Bonded Interfaces Using Tapered ENF Specimens

Fracture Toughness of Wood—Wood and Wood—FRP Bonded Interfaces under Mode-II Loading

Mode-Ii Fatigue Fracture of Wood-Composite Bonded Interfaces

Study of Ligament Length Effect on Mode Mix of a Modified In-Plane Shear Test Specimen

Mixed-Mode Fracture Of Hybrid Material Bonded Interfaces Under Four-Point Bending

Tapered beam on elastic foundation model for compliance rate change of TDCB specimen

Characterization of Mode-I fracture of hybrid material interface bonds by contoured DCB specimens

Fracture characterization of Carbon fiber-reinforced polymer-concrete bonded interfaces under four-point bending

Novel beam analysis of end notched flexure specimen for mode-II fracture

A Bi-Linear Cohesive Law-Based Model for Mode II Fracture Analysis: Application to ENF Test for Unidirectional Fibrous Composites

Nonlinear Fracture Analysis of Delamination Crack Jumps in Laminated Composites

Compliance rate change of tapered double cantilever beam specimen with hybrid interface bonds

Fracture Analysis of Mode-Ii Crack Perpendicular to Imperfect Bimaterial Interface

Mode I Fracture Toughness of Fiber Reinforced Composite-Wood Bonded Interface

Theoretical Analysis of Mode I Fracture of Adhesively Bonded Bi-Material DCB Joints

Influence Of Span Ratio On The Four-Point Bend End Notched Flexure Test

Mixed Mode Fracture Characterization of GFRP-concrete Bonded Interface Using Four-Point Asymmetric End-Notched Flexure Test

Fracture Analysis of Shear Deformable Bi-Material Interface

Experimental and numerical investigation on test methods for mode II fracture of composite‐titanium adhesively bonded structures