Abstract:Niobium fluoride (NbF5) is introduced into the MgH2 + 1/4AlH(3) hydride composite by ball milling to improve the hydrogen desorption properties of the Mg-Al-H system. It is found that after being ball milled with 1 mol % of NbF5, AlH3 in the composite has almost fully decomposed and forms metallic Al, which indicates that NbF5 can significantly destabilize AlH3. DSC results show that NbF5 addition also helps reduce the peak desorption temperature of MgH2 in the composite from 324 to 280 degrees C. Isothermal desorption measurements demonstrate that MgH2 in the doped composite can rapidly release 98% of its hydrogen after desorption at 300 degrees C for 1 h, while the valued is only 46% for the undoped composite. The activation energy for hydrogen desorption of MgH2 in the doped composite is calculated to be 104.5 kJ/mol, much lower than that in the undoped composite (127.4 kJ/mol). These results suggest that NbF5 addition dramatically improves the hydrogen desorption kinetics of the MgH2 + 1/4AlH(3) composite. Dehydrogenation hydrogenation measurements reveal that the hydrogen desorption kinetics of the undoped composite declines with cycle number, whereas the NbF5-doped composite maintains good cycling stability. Microstructure studies indicate that the decline of the kinetics is attributed to the grain growth and particle agglomeration of MgH2 during hydrogen sorption cycling. However, NbF5 addition can suppress this grain growth through the formation of Nb/NbH layers surrounding the particles of MgH2 and acting both as the impediment to grain growth of Mg/MgH2 and as the gateway for hydrogen diffusion. Finally, the role that AlH3 plays in the hydrogen desorption process of the Mg-Al-H composites is discussed.

Properties of Hydriding and Dehydriding of Nanocrystalline Composite of Mg-Ni-Cr2O3

Hydrogen storage properties of nanocomposite Mg–Ni–Cu–CrCl3 prepared by mechanical alloying

Preparation and Hydrogen Storage Properties of Mg-20 Wt.% Mg<sub>2</sub>Ni<sub>0.8</sub>Cr<sub>0.2</sub> Composite with TiO<sub>2</sub> Nanoparticles

Hydrogen Storage Properties of the Mg–Ni–CrCl3 Nanocomposite

Preparation and hydrogen storage properties of Mg-20 wt.% Mg 2Ni0.8Cr0.2 composite with TiO2 nanoparticles

Sorption Properties of Mg-Ni-Crcl3 Hydrogen Storage Composite

Microstructure and Hydrogen Storage Characteristics of Nanocrystalline Mg+xwt% LaMg2Ni (x=0–30) Composites

Hydrogen Storage Properties of Nanocomposite Mg-Ni-MnO2 Made by Mechanical Milling

Hydrogen Storage Properties of MgNiCu-CrCl3 and Ignition in Hydriding Process

Phase-structure and Hydrogen Storage Behaviors of Mg+10％ Ni2P Composite Prepared by Reactive Ball-Milling

Hydrogen storage properties of nanocomposite Mg-Ni-V2O5

Hydrogenation Properties of Mg/Mg2ni0.8cr0.2 Composites Containing Tio2 Nanoparticles

Hydrogenation Properties of Mechanically Milled Mg2Ni0.8Cr0.2-CoO/Al2O3 Composites.

Structure and Hydrogenation Properties of Nanocrystalline Mg2Ni Prepared by Hydriding Combustion Synthesis and Mechanical Milling

The Dehydrogenation Mechanism and Cycling Property of MgH 2 Modified by CoB/CNTs Addition

Microstructures And Hydrogen Desorption Properties Of The Mgh2-Alh3 Composite With Nbf5 Addition

Hydrogen Storage Properties of Mg-based Materials with CNTs

Hydrogen Storage Properties of Nanocrystalline Mg–Ce/Ni Composite

Hydriding and dehydriding properties of nanostructured Mg2Ni alloy prepared by the process of hydriding combustion synthesis and subsequent mechanical grinding

EFFECT OF TiO2 NANOPARTICLES ON THE HYDRIDING AND DEHYDRIDING PROPERTIES OF Mg-15wt%Mg2Ni COMPOSITES

HYDROGEN STORAGE PROPERTY OF <font>Mg</font>-<font>Ni</font>-<font>TiO</font><sub>2</sub>-<font>CNTs</font> COMPOSITES