Abstract:The (111) oriented copper with a nanotwin structure, known as (111) nt-Cu, demonstrates exceptional physical properties and enhanced anti-corrosion, rendering it suitable for application as the interconnection material in integrated circuit (IC) technology. Nevertheless, the microstructure of (111) nt-Cu may intermittently diminish following annealing processes exceeding 200 °C due to the occurrence of anisotropic grain growth. This investigation delves into the determinants influencing the thermal stability of (111) nt-Cu films. The (111) nt-Cu films were continuously electroplated employing identical electrolyte. Despite the consistent depletion of the additives, the microstructure of (111) nt-Cu basically remained unchanged. Nevertheless, the thermal stability of (111) nt-Cu films with a similar microstructure decreased with the depletion of additives. Time-of-flight secondary ion mass spectroscopy (TOF-SIMS) was employed to quantify the integration of non-metallic impurities (such as N, O, C, S and Cl) within the electrodeposited (111) nt-Cu, induced by the electrolyte additive chemistry. According to the SIMS analysis, a notable disparity in impurity intensity between two (111) nt-Cu films electroplated using the electrolyte for different durations was observed, primarily attributed to the presence of chlorine. Chlorine formed robust chemical bonds with Cu atoms, thereby immobilizing boundaries and impeding the anisotropic grain growth process. This study endeavors to introduce a novel perspective on enhancing the thermal stability of (111) nt-Cu through engineered chemical additives.

Impact Of Aspect Ratio And Line Spacing On Microstructure In Damascene Cu Interconnects

The Effect of Line Width on Stress-Induced Voiding in Cu Dual Damascene Interconnects

Understanding the Impact of Surface Engineering, Structure, and Design on Electromigration Through Monte Carlo Simulation and In‐Situ SEM Studies

A Comparative Study of Microstructure During Solidification Within Ultrafine Interconnects of Different Sizes and Geometries

Effect of in-line electron beam treatment on the electrical performance of Cu/organic low-k damascene interconnects

Effect of Grain Size on Deformation and Fracture of Inconel718: an In-Situ SEM-EBSD-DIC Investigation

Experimental and Numerical Studies of Stress Migration in Cu Interconnects Embedded in Different Dielectrics

Microstructure evolution in Cu-2.13Fe-0.026P (wt%): The contribution of texture intensity to residual stress variation

Microstructural effects of copper deposits on direct bonding for 3D IC integration

The Microstructure and Grain Size of Jet Electroplated Copper Films in Damascene Trench Features

Measuring residual stresses in individual on-chip interconnects using synchrotron nanodiffraction

Optimized Copper Line Aspect Ratio by Monte Carlo Method

Investigation of the Dendritic Structure Influence on the Electrical and Mechanical Properties Diversification of the Continuously Casted Copper Strand

Crystallographic Structure and Mechanical Behaviour of SnAgCu Solder Interconnects under a Constant Loading Rate

Effects of Bonding Parameters on the Reliability of Fine-Pitch Cu/Ni/SnAg Micro-Bump Chip-to-Chip Interconnection for Three-Dimensional Chip Stacking

Effect of laser deposition connecting angle on microstructure and tensile properties of GH4169 alloy

Microstructure and Texture of Pure Copper under Large Compression Deformation and Different Annealing Times

Effects of microstructure and texture on the deep drawability of C10200 copper sheets

Effect of impurities on anisotropic grain growth in (111)-oriented nanotwinned copper

Influence of inhomogeneous anisotropic Copper grains in TSV on the thermo-mechanical behaviors in the annealing process

Enhanced thermal expansion with nanocrystalline Cu in SiO 2 vias for hybrid bonding