Abstract:In order to improve the ablation resistance of carbon/carbon (C/C) composites, SiC-ZrB2 di-phase ceramic were introduced by reactive melt infiltration. The ablation properties of these composites were evaluated by oxyacetylene torch with a heat flux of 2.38 MW/m2 for 60 s. Compared with the pure C/C composites, the C/C-SiC-ZrB2 composites show a significant improvement in the ablation resistance, and the linear and mass ablation rates decreased from 10.28×10−3 mm/s to 6.72×10−3 mm/s and from 3.08×10−3 g/s to 0.61×10−3 g/s, respectively. After ablation test, the flexural strength retentions of the C/C and C/C-SiC-ZrB2 composites near the ablated center region are 39.7% and 81.6%, respectively. The higher strength retention rate of C/C-SiC-ZrB2 composites was attributed to the introduction of SiC-ZrB2 ceramic phases, which have excellent ablation resistant property. During ablation test, an ‘embedding structure’ of Zr-O-Si glass layer was formed, which could act as an effective barrier for oxygen and heat. The oxide ceramic coating could protect the C/C-SiC-ZrB2 composites from further ablation, and thus contribute to retaining the mechanical property of C/C-SiC-ZrB2 composites after ablation.

ABLATION PROPERTY AND MECHANISM OF THREE DIMENSIONAL NEEDLED C/(SiC-TaC) COMPOSITES

ABLATION PROPERTIES OF THREE DIMENSIONAL NEEDLED C/SiC COMPOSITES BY THE CHEMICAL VAPOR INFILTRATION

Ablation Resistance Properties and Mechanism of 3D C/SiC-TaC Composites

Ablation Behaviors of Carbon/carbon Composites with C-SiC-TaC Multi-Interlayers

Ablation property of SiC-TaSi2 coated carbon/carbon composites

ABLATION PROPERTY OF <font>SiC-TaSi</font><sub>2</sub> COATED CARBON/CARBON COMPOSITES

Microstructure, Thermophysical, and Ablative Performances of a 3D Needled C/C–SiC Composite

Effects of TaC addition on the ablation resistance of C/SiC

Ablation behaviour of a TaC coating on SiC coated C/C composites at different temperatures

ABLATION OF CARBON-CARBON COMPOSITES WITH TANTALUM

Preparation, Mechanical and Ablation Properties of a C/C-TaB2-SiC Composite

Preparation and Ablation Properties of SiC Modified C/C Composites

Study on the ablation performance of SiC-coated high thermal conductivity three-dimensional C/C composites

Processing and Ablation Properties of C/SiC-(W-C) Composites

The Ablation Behavior and Mechanical Property of C/C-SiC-ZrB2 Composites Fabricated by Reactive Melt Infiltration

Ablation Behavior of CVD-TaC Coatings with Different Crystal Structures for C/C Composites under Oxyacetylene Flame

Ablation behavior and mechanisms of 3D C<sub>f</sub>/ZrB<sub>2</sub>-SiC composite applied in long-term temperature up to 2400 C

Ablation Behaviors of C/C Composites with Pyrocarbon (Pyc)-Tac-pyc Multi-Interlayers in Oxyacetylene Flame

Ablation Resistance of Carbides-Coated C/C Composites

Ablation Behavior of TaB2SiC Coating for Carbon/carbon Composites under Oxyacetylene Torch

Ablation of Tungsten Matrix Composites Reinforced by TiC and ZrC Particles