Abstract:Although the mark of 18 power conversion efficiency (PCE) was surpassed recently, organic solar cells (OSCs) still have several challenges to overcome in order to fully compete with silicon-based solar cells in the energy market. One of the main challenges is the upscaling of the technology. Despite the recent advances in PCEs, a big scalability gap still exists between the best lab-scale device and large-scale modules fabricated via roll-to-roll processing. The polymer donor PffBT4T-C9C13 has already shown efficiencies of almost 12 together with PCBM. Combined with the nonfullerene acceptor O-IDTBR, a reduced voltage loss of 0.5 V between the optical band gap and VOC is obtained, with an open-circuit voltage up to 1.12 V, which is one of the highest values reported for OSCs. In this work, we demonstrate a route to upscaling OSCs based on PffBT4T-C9C13:O-IDTBR through temperature-controlled slot-die coating, solving the challenges of the temperature dependent aggregation behavior, which strongly affects the efficiency of the device. Efficiencies above 4 were achieved in our flexible and roll-processed devices with an area of 1 cm2 and the different origins of the scalability lag were studied. As an additional necessary step for scalability, we incorporate the use of a hydrocarbon-based solvent to remove the environmentally dangerous halogenated solvents. To the best of our knowledge, this is the first work reporting PffBT4T:O-IDTBR solar cells fabricated in open air using slot-die coating in a roll-platform with flexible substrates, that mimics large-scale roll-to-roll processing.

Roll-Coating Fabrication of Flexible Organic Solar Cells: Comparison of Fullerene and Fullerene-Free Systems

Roll Coated Large Area ITO- and Vacuum-Free All Organic Solar Cells from Diketopyrrolopyrrole Based Non-Fullerene Acceptors with Molecular Geometry Effects

Roll-Coating Fabrication of Ito-Free Flexible Solar Cells Based on A Non-Fullerene Small Molecule Acceptor

Roll-Coated Fabrication of Fullerene-Free Organic Solar Cells with Improved Stability

Environmentally Friendly and Roll-Processed Flexible Organic Solar Cells Based on PM6:Y6

Enabling Roll-Processed and Flexible Organic Solar Cells Based On PffBT4T Through Temperature-Controlled Slot-Die Coating

Roll-coating Fabrication of Flexible Large Area Small Molecule Solar Cells with Power Conversion Efficiency Exceeding 1%

A Sequential Slot‐Die Coated Ternary System Enables Efficient Flexible Organic Solar Cells

Biomimetic Electrodes for Flexible Organic Solar Cells with Efficiencies over 16%

Non-Halogenated Solvents Processed Efficient ITO-Free Flexible Organic Solar Cells with Upscaled Area

Ultra‐Thin Flexible ITO‐free Organic Solar Cells with Gradient Bilayer Electron Transport Materials

Flexible ITO-Free Organic Solar Cells Based on $\hbox{moo}_{3}/\hbox{ag}$ Anodes

Semitransparent, Non-Fullerene and Flexible All-Plastic Solar Cells

Highly Efficient Flexible Roll-to-Roll Organic Photovoltaics Based on Non-Fullerene Acceptors

Processing-Friendly Slot-Die-Cast Nonfullerene Organic Solar Cells with Optimized Morphology.

Flexible ITO-Free Organic Solar Cells Based on <named-content content-type="math" xlink:type="simple"> <inline-formula> <tex-math notation="TeX">$\hbox{MoO}_{3}/\hbox{Ag}$</tex-math></inline-formula></named-content> Anodes

Mechanical Robust Flexible Single‐Component Organic Solar Cells

The New Era for Organic Solar Cells: Non-Fullerene Small Molecular Acceptors

High-efficiency ultrathin flexible organic solar cells with a bilayer hole transport layer

Ultra Robust and Highly Efficient Flexible Organic Solar Cells with Over 18% Efficiency Realized by Incorporating a Linker Dimerized Acceptor.

High-efficiency Flexible Organic Solar Cells with a Polymer-Incorporated Pseudo-Planar Heterojunction.