Abstract:The ability of organic photovoltaics (OPVs) to be deposited on flexible substrates by roll-to-roll (R2R) processes is highly attractive for rapid mass production. Many research teams have demonstrated the great potential of flexible OPVs. However, the fabrication of R2R-coated OPVs is quite limited. There is still a performance gap between the R2R flexible OPVs and the rigid OPVs. In this study, we demonstrate the promising photovoltaic characteristics of flexible OPVs fabricated from blends of low bandgap polymer poly[(2,6-(4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)-benzo[1,2-b:4,5-b′]dithiophene))-alt-(5,5-(1′,3′-di-2-thienyl-5′,7′-bis(2-ethylhexyl)benzo[1′,2′-c:4′,5′-c′]dithiophene-4,8-dione)] (PBDB-T) and non-fullerene 3,9-bis(2-methylene-(3-(1,1-dicyanomethylene)-indanone))-5,5,11,11-tetrakis(4-hexylphenyl)-dithieno[2,3-d:2′,3′-d′]-s-indaceno[1,2-b:5,6-b′]dithiophene (ITIC). We successfully R2R slot-die coated the flexible OPVs with high power conversion efficiency (PCE) of over 8.9% under irradiation of simulated sunlight. Our results indicate that the processing parameters significantly affect the PCE of R2R flexible OPVs. By adjusting the amount of solvent additive and processing temperature, as well as optimizing thermal annealing conditions, the high PCE of R2R slot-die coated OPVs can be obtained. These results provide significant insights into the fundamentals of highly efficient OPVs for the R2R slot-die coating process.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is: **How to realize the roll - to - roll (R2R) large - scale production of high - efficiency flexible organic photovoltaic devices (OPVs) by optimizing processing parameters**. Specifically, the author focuses on the performance improvement of flexible OPVs based on non - fullerene acceptor materials under the R2R process. ### Problem Background: 1. **Advantages of Organic Photovoltaic Devices (OPVs)**: OPVs have the advantages of being lightweight, low - cost, highly flexible, and easy to produce on a large area, so they are regarded as an emerging renewable energy technology. 2. **Existing Challenges**: Although laboratory - scale OPVs have achieved relatively high power conversion efficiency (PCE), there is still a gap in the performance of OPVs in the roll - to - roll (R2R) large - scale production process, especially on flexible substrates. The traditional R2R process usually uses fullerene derivatives as acceptor materials, but these materials have problems such as weak absorption, non - adjustable band gap, and poor thermal stability. 3. **Advantages of Non - Fullerene Acceptor Materials**: In recent years, non - fullerene small - molecule materials have become an ideal alternative to fullerenes because of their chemical tunability, strong absorption, and excellent charge - transfer characteristics. However, research on R2R OPVs based on non - fullerene acceptors is relatively scarce, especially for applications on flexible substrates. ### Research Objectives: - **Improve the PCE of R2R Flexible OPVs**: Improve the PCE of flexible OPVs based on the low - band - gap polymer PBDB - T and the non - fullerene acceptor ITIC by optimizing processing parameters (such as solvent additives, processing temperature, and thermal annealing conditions). - **Explore the Compatibility between the R2R Process and Non - Fullerene Materials**: Verify the feasibility of non - fullerene materials in the R2R process and provide guidance for future commercial production. ### Main Findings: - The author successfully prepared R2R flexible OPVs with a PCE exceeding 8.9% by adjusting the amount of solvent additive (DIO) and the processing temperature. - Research shows that the key factors in the R2R process include the solvent evaporation rate, film morphology, and heat - treatment conditions. By optimizing these parameters, the performance of the device can be significantly improved. - The experimental results also show that appropriate thermal annealing treatment (such as annealing at 140°C for 30 minutes) helps to improve the fill factor (FF) of the device, thereby increasing the PCE. In conclusion, this research provides important experimental evidence and technical support for realizing the large - scale production of high - efficiency flexible OPVs.

Highly Efficient Flexible Roll-to-Roll Organic Photovoltaics Based on Non-Fullerene Acceptors

Flexible High‐Performance and Solution‐Processed Organic Photovoltaics with Robust Mechanical Stability

Highly Flexible All‐Polymer Solar Cells Processed Without Post‐Treatment Achieving 13.56% Efficiency

Highly efficient organic photovoltaics with enhanced stability through the formation of doping-induced stable interfaces

High‐Efficiency ITO‐Free Organic Photovoltaics with Superior Flexibility and Upscalability

Design of a Rigid Scaffold Structure Toward Efficient and Stable Organic Photovoltaics

Flexible OPV modules for highly efficient indoor applications

Solution-Processed Electron-Transport Layer-free Organic Photovoltaics with Liquid Metal Cathodes

Enabling Roll-Processed and Flexible Organic Solar Cells Based On PffBT4T Through Temperature-Controlled Slot-Die Coating

High performance roll-to-roll printed PTB7-Th/PCBM solar cells (Conference Presentation)

A High-Performance Organic Photovoltaic System with Versatile Solution Processability

Processing Strategies for an Organic Photovoltaic Module with over 10% Efficiency

Stretchable and transparent nanopillar arrays for high-performance ultra-flexible organic photovoltaics

Slot-die coated large-area flexible all-polymer solar cells by non-halogenated solvent

High-efficiency Flexible Organic Solar Cells with a Polymer-Incorporated Pseudo-Planar Heterojunction.

Constructing High‐Performance Organic Photovoltaics Via Emerging Non‐Fullerene Acceptors and Tandem‐Junction Structure

Organic photovoltaic cell with 17% efficiency and superior processability

Low-Cost Fully Non-fused Ring Acceptor Enables Efficient Organic Photovoltaic Modules for Multi-Scene Applications

A Mechanically Robust Conducting Polymer Network Electrode for Efficient Flexible Perovskite Solar Cells

High-Efficiency All-Ambient Air, All-Solution and Low-Temperature Processed Nonfullerene Photovoltaics with Layer-by-Layer Co-Doped Polymeric Anodes

High-Efficiency Thick Film Binary Organic Photovoltaics Via Asymmetric Alkyl Chain Engineering