Abstract:Organic solar cells (OSCs) have significant potential applications in flexible and wearable electronics. However, commonly used indium tin oxide (ITO)-based electrodes are rigid, bulky and fragile; thus, the bending stability issues of the flexible ITO-free devices should be addressed with more attention. In this study, we introduced a poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS [herein PH1000]) flexible electrode and investigated the effect of interface bonding engineering on the performance of the flexible device by a facile solution-processed approach with doping of natural polyhydroxy compounds. Based on the PBDB-T-2Cl:IT-4F photoactive system, the highest power conversion efficiency (PCE) of 12.35% was achieved by d-maltose-doped PH1000/PET composite electrodes, with the open-circuit voltage (V-oc) of 0.885V, the short-circuit current (J(sc)) of 19.13 mA cm(-2), and the fill factor (FF) of 72.92%. This is one of the highest values reported to date for flexible OSCs. Most importantly, the bending performance of the flexible OSCs was significantly improved by the interface bonding engineering due to the dramatic enhancement of the adhesion capability between the PH1000 electrode and PET flexible substrate; this resulted in an excellent bending performance, and approximate to 92% of the original PCE value could be maintained after 1000 bending cycles (r = 4 mm) and approximate to 80% of that could be maintained after 1000 folding cycles (r < 1 mm). The results open a favorable avenue for the realization of highly efficient and flexible ITO-free organic solar cells.

Mechanical Robust Flexible Single‐Component Organic Solar Cells

Biomimetic Electrodes for Flexible Organic Solar Cells with Efficiencies over 16%

Ultra Robust and Highly Efficient Flexible Organic Solar Cells with Over 18% Efficiency Realized by Incorporating a Linker Dimerized Acceptor.

Ultra‐Thin Flexible ITO‐free Organic Solar Cells with Gradient Bilayer Electron Transport Materials

Ductile Oligomeric Acceptor‐Modified Flexible Organic Solar Cells Show Excellent Mechanical Robustness and Near 18% Efficiency

High-efficiency ultrathin flexible organic solar cells with a bilayer hole transport layer

Synergetic Transparent Electrode Architecture for Efficient Non-Fullerene Flexible Organic Solar Cells with >12% Efficiency

High-efficiency Flexible Organic Solar Cells with a Polymer-Incorporated Pseudo-Planar Heterojunction.

Highly Flexible All‐Polymer Solar Cells Processed Without Post‐Treatment Achieving 13.56% Efficiency

Recent Progress in Flexible and Stretchable Organic Solar Cells

Flexible Organic Solar Cells: Progress and Challenges

High-Performance Intrinsically Stretchable Organic Solar Cells Based on Flexible Spacer Incorporated Dimerized Small-Molecule Acceptors

Evidencing Excellent Thermal‐ and Photostability for Single‐Component Organic Solar Cells with Inherently Built‐In Microstructure

Enhancing Mechanical Durability and Long‐Term Stability in Organic Solar Cells via Flexible Linker‐Sequential Block Copolymerized Donors

Polymer‐entangled Spontaneous Pseudo Planar Heterojunction for Constructing Efficient Flexible Organic Solar Cells

Interface Bonding Engineering Of A Transparent Conductive Electrode Towards Highly Efficient And Mechanically Flexible Ito-Free Organic Solar Cells

Efficient and Mechanically-Robust Organic Solar Cells Based on Vertical Stratification Modulation Through Sequential Blade-Coating

Complete Solution-Processed Semitransparent and Flexible Organic Solar Cells: A Success of Polyimide/Ag-Nanowires- and PH1000-Based Electrodes with Plasmonic Enhanced Light Absorption

Low‐Bandgap Organic Bulk‐Heterojunction Enabled Efficient and Flexible Perovskite Solar Cells

Polyimide/ZnO composite cooperatively crosslinked by Zn2+ Salt-Bondings and hydrogen bondings for ultraflexible organic solar cells

Flexible organic solar cells: Materials, large-area fabrication techniques and potential applications