Abstract:Organic-inorganic hybrid perovskite solar cells have experienced a skyrocketing photoelectric conversion efficiency (PCE) increase in recent years,and become the "rock star" in the field of solar cells.After only 4 years,the certificated PCE of these materials based solid state solar cells have reach the maximum 22.1％,which is comparable to the highest PCE of the commercial silicon-based solar cells and higher than those of the organic solar cells and the dye-sensitized solar cells.Besides the promising efficiency,these materials surpass its competitors with the adaptability to solutionprocess at low-temperature and in air,and better flexibility,which can lead to lower large-scale production cost and more application potential for wearable electronics.The outstanding device performance of the hybrid perovskite solar cells have attracted intensive research interest,and besides increasing the PCE,lots of efforts have been focused on functional diversification for this solar cells.Compare to the commercial solar cells based on rigid silicon,organic-inorganic hybrid perovskite materials exhibit better flexibility which is beneficial for applications in flexible electronic devices,and due to the mild preparation conditions and the solution processablity,it is easy to prepare a variety of nanostructures.Those advantages have expanded the application scope of the hybrid perovskite materials,especially for fabricating flexible and semi-transparent solar cells which have potential use in building integrated photovoltaic such as solar cell windows and solar cell curtains.Here in this review,we focus on the recent progress of the flexible and semi-transparent solar cells based on organic-inorganic hybrid perovskite materials.In the part of the flexible hybrid perovskite solar cells,two mainstream device structures,namely planar and fiber-shaped devices,are discussed and the device structure and materials selection are analyzed in detail.As for the planar flexible perovskite solar cells,the choosing of the low-temperature processable function materials for the solar cells seems to be one of key factors due to the fact that most flexible planar substrates are vulnerable to the high-temperature treatments.As for the fiber-shaped perovskite solar cells,the choosing of the proper transparent conductive electrode materials is crucial which should have a good balance between the transparency and conductivity,and due to the difficulty of forming high-quality perovskite function layer on the curved surface of a certain wire,the prepare methods have to be upgraded too.In the part of the semi-transparent hybrid perovskite solar cells,two main strategies (reducing film thickness and forming isolated island structure) are discussed and a lot of reported preparation methods are analyzed in detail.As for the former strategy of reducing film thickness,the advantages are the comparatively higher PCE,easier manufacture and better controllability and the disadvantage is the unfavorable brownish color.As for the latter strategy of forming isolated island structure,the advantage is the better full-spectrum transmission and the disadvantages are comparatively more complicated manufacture and worse controllability.The whole paper has presented the development of the flexible and semi-transparent perovskite solar cells so far and gave detailed discussions for the reported works.Based on these analyzations,the organic-inorganic hybrid perovskites will find their special and unique position in the field of flexible and semi-transparent solar cells and may aggressively push the field forward.

Low‐Bandgap Organic Bulk‐Heterojunction Enabled Efficient and Flexible Perovskite Solar Cells

Spatial Distribution Recast for Organic Bulk Heterojunctions for High‐Performance All‐Inorganic Perovskite/Organic Integrated Solar Cells

Design of multifunctional near-infrared organic heterojunction and double hole transport layer to improve efficiency and stability of perovskite solar cells

Highly efficient near-infrared hybrid perovskite solar cells by integrating with a novel organic bulk-heterojunction

Perovskite Solar Cells with 18.21% Efficiency and Area over 1 Cm(2) Fabricated by Heterojunction Engineering

Organic–inorganic hybrid cathode interlayer for efficient flexible inverted organic solar modules

Efficient and Reproducible Monolithic Perovskite/Organic Tandem Solar Cells with Low-Loss Interconnecting Layers

High-efficiency Organic Solar Cells with Low Voltage-Loss of 0.46 V

Bulk heterojunction perovskite solar cells incorporated with p-type low optical gap conjugated polymers

High‐Performance Flexible Perovskite Solar Cells via Precise Control of Electron Transport Layer

High-efficiency ultrathin flexible organic solar cells with a bilayer hole transport layer

Highly Efficient Porphyrin‐Based OPV/Perovskite Hybrid Solar Cells with Extended Photoresponse and High Fill Factor

Polymer‐entangled Spontaneous Pseudo Planar Heterojunction for Constructing Efficient Flexible Organic Solar Cells

Highly Efficient Organic Solar Cells Consisting of Double Bulk Heterojunction Layers

Structure Optimization and Passivation Strategy Toward Efficient Integrated Perovskite/Pseudo‐Planar Heterojunction Solar Cells

Temperature‐Insensitive Efficient Inorganic Perovskite Photovoltaics by Bulk Heterojunctions

A Semitransparent Inorganic Perovskite Film for Overcoming Ultraviolet Light Instability of Organic Solar Cells and Achieving 14.03% Efficiency

Flexible and Semi-Transparent Perovskite Solar Cells

Integrated Ideal‐Bandgap Perovskite/Bulk‐Heterojunction Solar Cells with Efficiencies > 24%

High‐Efficiency Carbon‐Based CsPbIBr 2 Solar Cells with Interfacial Energy Loss Suppressed by a Thin Bulk‐Heterojunction Layer

Organic Solar Cell With Efficiency Over 20% and VOC Exceeding 2.1 V Enabled by Tandem With All‐Inorganic Perovskite and Thermal Annealing‐Free Process