Abstract:In this work, we focus on the fine-tuning of absorption spectra to achieve well-matched light response and reducing the energy loss (E-loss = E-g(opt) - e*V-OC, where E-g(opt) is the optical bandgap, and V-OC is the open circuit voltage) for the sub-cells of tandem organic solar cells (OSCs) to improve photovoltaic performance. We select PTB7-Th:IEICO-4F with a band gap of 1.24 eV as the rear cell and J52-2F:IT-M with a band gap of 1.59 eV as the front cell to fabricate the tandem OSCs. The absorption spectra of PTB7-Th:IEICO-4F is mainly located in the region of 600 - 950 nm, while that of J52-2F:IT-M is mainly located in the region of 450 - 750 nm. Their response spectra are very complementary, and both of the sub-cells show high external quantum efficiency, prompting the tandem OSCs to realize high-efficiency utilization of solar spectrum in the range of 300 - 1000 nm. In this tandem OSC, the E-loss in both front and rear cells are also effectively controlled to be 0.64 and 0.53 eV, respectively. In addition, an efficient interconnection layer (ICL) of ZnO/PCP-Na is used to connect the front and the rear sub-cells, which shows outstanding diode characteristics and high light transmittance in the long wavelength direction. In view of these excellent properties, the tandem solar cells manufactured in this work possess the advantages of high short-circuit current density (J(SC)) and V-OC, reaching 13.3 mA/cm(2) and 1.65 V, respectively. The highest power conversion efficiency (PCE) of the tandem OSC reaches 14.9%. The device parameters decrease slightly after encapsulation due to the intense ultraviolet irradiation, and a certified PCE of 14.0%, with a V-OC of 1.64 V, a J(SC) of 12.9 mA/cm(2), and a fill factor (FF) of 0.664, recorded by National Institute of Metrology (NIM), China. This result is the best obtained in the organic photovoltaic field.

A Semitransparent Inorganic Perovskite Film for Overcoming Ultraviolet Light Instability of Organic Solar Cells and Achieving 14.03% Efficiency

Inorganic perovskite solar cells: an emerging member of the photovoltaic community

Constructing Monolithic Perovskite/Organic Tandem Solar Cell with Efficiency of 22.0% Via Reduced Open‐Circuit Voltage Loss and Broadened Absorption Spectra

Combination of Highly Photovoltaic and Highly Transparent Materials Enables Record Performance Semitransparent Organic Solar Cells

Surface Reconstruction for Stable Monolithic All‐Inorganic Perovskite/Organic Tandem Solar Cells with over 21% Efficiency

Efficient and Reproducible Monolithic Perovskite/Organic Tandem Solar Cells with Low-Loss Interconnecting Layers

Organic Solar Cell With Efficiency Over 20% and VOC Exceeding 2.1 V Enabled by Tandem With All‐Inorganic Perovskite and Thermal Annealing‐Free Process

Highly Durable Inverted Inorganic Perovskite/Organic Tandem Solar Cells Enabled by Multifunctional Additives

Highly Stable and Efficient Perovskite Solar Cells with 22.0% Efficiency Based on Inorganic–Organic Dopant‐Free Double Hole Transporting Layers

Ultraviolet Filtration and Defect Passivation for Efficient and Photostable CsPbBr3 Perovskite Solar Cells by Interface Engineering with Ultraviolet Absorber

Spatial Distribution Recast for Organic Bulk Heterojunctions for High‐Performance All‐Inorganic Perovskite/Organic Integrated Solar Cells

Improving the Photovoltaic Performance of Flexible Solar Cells with Semitransparent Inorganic Perovskite Active Layers by Interface Engineering.

Improving Efficiency and Light Stability of Perovskite Solar Cells by Incorporating YVO4:Eu3+, Bi3+ Nanophosphor into the Mesoporous TiO2 Layer

Organic Solar Cells with an Efficiency Approaching 15%

Large-Area 23%-Efficient Monolithic Perovskite/Homojunction-Silicon Tandem Solar Cell with Enhanced UV Stability Using Down-Shifting Material

Large Area 23%-Efficient Monolithic Perovskite/Homo-Junction-Silicon Tandem Solar Cell with Enhanced UV Stability Using Down-Shifting Material

A ternary organic electron transport layer for efficient and photostable perovskite solar cells under full spectrum illumination

An intermeshing electron transporting layer for efficient and stable CsPbI2Br perovskite solar cells with open circuit voltage over 1.3 V

Transparent Recombination Electrode with Dual‐Functional Transport and Protective Layer for Efficient and Stable Monolithic Perovskite/Organic Tandem Solar Cells

Intermediate‐Adduct‐Assisted Growth of Stable CsPbI 2 Br Inorganic Perovskite Films for High‐Efficiency Semitransparent Solar Cells

Perovskite Solar Cells with Extremely High 24.63% Efficiency Through Design of Double Electron Transport Layers and Double Luminescent Converter Layers